[Fri May 3 14:25:25 2013] Detection parameters: Position = (429.2, 219.2) = 0 5 32.61 20 7 17.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 156.1 +/- 15.6 Background counts = 6.1 Rate = 0.008 +/- 0.0008 [Fri May 3 14:25:26 2013] Off-axis axis estimate = 11.09' [Fri May 3 14:25:42 2013] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting [Fri May 3 14:25:42 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri May 3 14:25:42 2013] Initial guess for spatial extent in simple fitting = 11.97" [Fri May 3 14:25:42 2013] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.851 [Fri May 3 14:25:42 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 11.97" [Fri May 3 14:25:42 2013] fullrun_mos2_xmm0510010701_pi300-10000_cl_pass0_src2.ximg exists [Fri May 3 14:25:42 2013] fullrun_mos2_xmm0510010701_pi300-10000_cl_pass0_src2_1.ximg exists [Fri May 3 14:25:42 2013] Fit fullrun_mos2_xmm0510010701_pi300-10000_cl_pass0_src2 appears to have run properly [Fri May 3 14:25:42 2013] fullrun_mos2_xmm0510010701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Fri May 3 14:25:42 2013] fullrun_mos2_xmm0510010701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Fri May 3 14:25:42 2013] Fit fullrun_mos2_xmm0510010701_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly [Fri May 3 14:25:53 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.322656 pixels away [Fri May 3 14:25:53 2013] Vigneting correction estimate = 1.000000 [Fri May 3 14:25:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 14:25:53 2013] Assessing source extent using major [Fri May 3 14:25:53 2013] Source does appear to be extended [Fri May 3 14:25:53 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 3 14:26:00 2013] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting [Fri May 3 14:26:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri May 3 14:26:00 2013] Initial guess for spatial extent in simple fitting = 11.97" [Fri May 3 14:26:00 2013] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.851 [Fri May 3 14:26:00 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 11.97" [Fri May 3 14:26:01 2013] fullrun_mos2_xmm0510010701_pi300-10000_cl_pass1_src2.ximg exists [Fri May 3 14:26:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0510010701_pi300-10000_cl_pass1_src2.csv [Fri May 3 14:26:01 2013] fullrun_mos2_xmm0510010701_pi300-10000_cl_pass1_src2_1.ximg exists [Fri May 3 14:26:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0510010701_pi300-10000_cl_pass1_src2.csv [Fri May 3 14:26:01 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0510010701_pi300-10000_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0510010701_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 14:26:01 2013] fullrun_mos2_xmm0510010701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Fri May 3 14:26:01 2013] fullrun_mos2_xmm0510010701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Fri May 3 14:26:01 2013] Fit fullrun_mos2_xmm0510010701_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly [Fri May 3 14:26:08 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.322656 pixels away [Fri May 3 14:26:08 2013] Vigneting correction estimate = 1.000000 [Fri May 3 14:26:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 14:26:08 2013] Assessing source extent using major [Fri May 3 14:26:08 2013] Source does appear to be extended [Fri May 3 14:26:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 3 14:36:15 2013] XMMSAS src. selection expression = ellipse(37293.239197, 19018.327393, 652.500000, 652.500000, 0.000000, X, Y) [Fri May 3 14:36:15 2013] Writing source region out to fullrun_mos2_xmm0510010701_pi300-10000_pass1_cl_src1_src.reg [Fri May 3 14:36:15 2013] Extracting stamp from image fullrun_mos2_xmm0510010701_pi300-10000_cl_sm2.00.img.gz, (392, 182) - (467, 257) [Fri May 3 14:36:15 2013] XMMSAS bgd. selection expression = annulus(37293.239197, 19018.327393, 1087.500000, 2175.000000, X, Y) [Fri May 3 14:36:15 2013] Writing fullrun_mos2_xmm0510010701_pi300-10000_pass1_cl_src1.gif [Fri May 3 14:36:34 2013] Mean detx,y = (14442.18, -769.68) [Fri May 3 14:36:35 2013] Setting backscal keywords in source and bgd. spectrum [Fri May 3 14:36:44 2013] Binned source spectrum to 10 counts/bin [Fri May 3 14:36:44 2013] Setting source spectrum file to fullrun_mos2_xmm0510010701_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Fri May 3 14:36:44 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0510010701_pi300-10000_pass1_cl_src1_bgd.pi.gz [Fri May 3 14:42:44 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Fri May 3 14:42:44 2013] rmf not generated due to insufficient counts [Fri May 3 14:43:50 2013] Updating aperture counts using extracted products [Fri May 3 14:43:50 2013] Total counts from fullrun_mos2_xmm0510010701_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 173.00 [Fri May 3 14:43:50 2013] Total counts from fullrun_mos2_xmm0510010701_pi300-10000_pass1_cl_src1_bgd.pi.gz = 356.00 [Fri May 3 14:43:50 2013] Got source and background scale factors 1340800.000000, 11012124.000000 [Fri May 3 14:43:50 2013] User source parameters: Position = (429.2, 219.2) = 0 5 32.61 20 7 17.0 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 129.7 +/- 14.2 Background aperture counts = 43.3 Rate = 0.006 +/- 0.0007 [Fri May 3 14:43:50 2013] Updating counts from extracted products [Fri May 3 14:43:50 2013] Set source signif. to 129.65/6.58 = 19.69 [Fri May 3 14:43:51 2013] Calculating source flux in energy range 0.30-8.00 [Fri May 3 14:43:51 2013] Using photon index=1.80, rate=0.00637, arf fullrun_mos2_xmm0510010701_pi300-10000_pass1_cl_src1.arf [Fri May 3 14:43:51 2013] Assuming count rate is from the 0.30-10.00 bandpass [Fri May 3 14:43:51 2013] Updating source flux to 1.9e-13 [Fri May 3 14:43:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Fri May 3 14:43:55 2013] xmm0510010701/analysis//spectral/fullrun_mos2_xmm0510010701_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete