[Fri May  3 14:25:25 2013] Detection parameters:
  Position = (209.9, 278.1) = 0 6 40.35 20 11 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.8 +/- 12.2
  Background counts = 7.4
  Rate = 0.006 +/- 0.001

[Fri May  3 14:25:25 2013] Off-axis axis estimate = 6.58'
[Fri May  3 14:25:41 2013] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Fri May  3 14:25:41 2013] Initial guess for spatial extent in simple fitting = 9.72"
[Fri May  3 14:25:41 2013] source mask rpix=2.2, npix_max = 29, mask sum = 23, frac = 0.769
[Fri May  3 14:25:41 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 9.72"
[Fri May  3 14:25:41 2013] fullrun_mos1_xmm0510010701_pi300-10000_cl_pass0_src4.ximg exists
[Fri May  3 14:25:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510010701_pi300-10000_cl_pass0_src4.csv
[Fri May  3 14:25:41 2013] fullrun_mos1_xmm0510010701_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri May  3 14:25:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510010701_pi300-10000_cl_pass0_src4.csv
[Fri May  3 14:25:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510010701_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510010701_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 14:25:42 2013] fullrun_mos1_xmm0510010701_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri May  3 14:25:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510010701_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri May  3 14:25:42 2013] fullrun_mos1_xmm0510010701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri May  3 14:25:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510010701_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri May  3 14:25:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510010701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510010701_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 14:25:50 2013] Spatial fit model total counts = 138.753000, observed total counts = 120.000000
[Fri May  3 14:25:50 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 14:25:50 2013] Vigneting correction estimate = 1.000000
[Fri May  3 14:25:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 14:25:50 2013] Assessing source extent using major
[Fri May  3 14:25:50 2013] Source does appear to be extended
[Fri May  3 14:25:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 14:26:00 2013] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Fri May  3 14:26:00 2013] Initial guess for spatial extent in simple fitting = 9.72"
[Fri May  3 14:26:00 2013] source mask rpix=2.2, npix_max = 29, mask sum = 23, frac = 0.769
[Fri May  3 14:26:00 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 9.72"
[Fri May  3 14:26:00 2013] fullrun_mos1_xmm0510010701_pi300-10000_cl_pass1_src4.ximg exists
[Fri May  3 14:26:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510010701_pi300-10000_cl_pass1_src4.csv
[Fri May  3 14:26:00 2013] fullrun_mos1_xmm0510010701_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri May  3 14:26:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510010701_pi300-10000_cl_pass1_src4.csv
[Fri May  3 14:26:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510010701_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510010701_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 14:26:00 2013] fullrun_mos1_xmm0510010701_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri May  3 14:26:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510010701_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri May  3 14:26:00 2013] fullrun_mos1_xmm0510010701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri May  3 14:26:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510010701_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri May  3 14:26:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510010701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510010701_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 14:26:06 2013] Spatial fit model total counts = 138.984000, observed total counts = 120.000000
[Fri May  3 14:26:06 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 14:26:06 2013] Vigneting correction estimate = 1.000000
[Fri May  3 14:26:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 14:26:06 2013] Assessing source extent using major
[Fri May  3 14:26:06 2013] Source does appear to be extended
[Fri May  3 14:26:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 14:26:17 2013] XMMSAS src. selection expression = ellipse(18215.161118, 24142.470215, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  3 14:26:17 2013] Not overwriting source region fullrun_mos1_xmm0510010701_pi300-10000_pass1_cl_src5_src.reg
[Fri May  3 14:26:17 2013] Extracting stamp from image fullrun_mos1_xmm0510010701_pi300-10000_cl_sm2.00.img.gz, (172, 241) - (247, 316)
[Fri May  3 14:26:17 2013] XMMSAS bgd. selection expression = annulus(18215.161118, 24142.470215, 1087.500000, 2175.000000, X, Y) && !ellipse(16978.186951, 23834.781525, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 14:26:17 2013] Writing fullrun_mos1_xmm0510010701_pi300-10000_pass1_cl_src5.gif
[Fri May  3 14:26:18 2013] ../../xmm0510010701/products/events/fullrun_mos1_xmm0510010701_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0510010701/products/events/fullrun_mos1_xmm0510010701_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Fri May  3 14:26:18 2013] Mean detx,y = (3699.24, 4622.95) 
[Fri May  3 14:26:18 2013] ../../xmm0510010701/products/images/fullrun_mos1_xmm0510010701_pi300-10000_pass1_cl_src5_src.img and ../../xmm0510010701/products/images/fullrun_mos1_xmm0510010701_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Fri May  3 14:26:18 2013] ../../xmm0510010701/products/spectra/fullrun_mos1_xmm0510010701_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0510010701/products/spectra/fullrun_mos1_xmm0510010701_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Fri May  3 14:26:18 2013] Setting source spectrum file to fullrun_mos1_xmm0510010701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri May  3 14:26:18 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0510010701_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri May  3 14:35:46 2013] Not generating rmf since there are only 71 counts
[Fri May  3 14:35:46 2013] rmf not generated due to insufficient counts
[Fri May  3 14:43:49 2013] Updating aperture counts using extracted products
[Fri May  3 14:43:49 2013] Total counts from fullrun_mos1_xmm0510010701_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 97.00
[Fri May  3 14:43:49 2013] Total counts from fullrun_mos1_xmm0510010701_pi300-10000_pass1_cl_src5_bgd.pi.gz = 319.00
[Fri May  3 14:43:49 2013] Got source and background scale factors 1061492.000000, 8371376.000000
[Fri May  3 14:43:49 2013] User source parameters:
  Position = (209.9, 278.1) = 0 6 40.35 20 11 25.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 56.6 +/- 10.9
  Background aperture counts = 40.4
  Rate = 0.003 +/- 0.0005

[Fri May  3 14:43:49 2013] Updating counts from extracted products
[Fri May  3 14:43:49 2013] Set source signif. to 56.55/6.36 = 8.89
[Fri May  3 14:43:49 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 14:43:49 2013] Using photon index=1.80, rate=0.00278, arf fullrun_mos1_xmm0510010701_pi300-10000_pass1_cl_src5.arf
[Fri May  3 14:43:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  3 14:43:49 2013] Updating source flux to 3.7e-14
[Fri May  3 14:43:52 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May  3 14:43:54 2013] xmm0510010701/analysis//spectral/fullrun_mos1_xmm0510010701_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete