[Sat Mar 3 15:19:01 2012] Detection parameters: Position = (465.5, 306.3) = 17 48 10.21 -27 31 15.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 84.2 +/- 15.7 Background counts = 47.7 Rate = 0.008 +/- 0.002 [Sat Mar 3 15:19:01 2012] Off-axis axis estimate = 12.12' [Sat Mar 3 15:20:21 2012] Using EEF radius (= 12.49 ")to estimate initial spatial extent for simple fitting [Sat Mar 3 15:20:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Mar 3 15:20:21 2012] Initial guess for spatial extent in simple fitting = 12.49" [Sat Mar 3 15:20:21 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.078 [Sat Mar 3 15:20:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.49" [Sat Mar 3 15:46:57 2012] fullrun_pn_xmm0510010401_pi300-10000_cl_pass0_src1.ximg exists [Sat Mar 3 15:46:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510010401_pi300-10000_cl_pass0_src1.csv [Sat Mar 3 15:46:57 2012] fullrun_pn_xmm0510010401_pi300-10000_cl_pass0_src1_1.ximg exists [Sat Mar 3 15:46:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510010401_pi300-10000_cl_pass0_src1.csv [Sat Mar 3 15:46:57 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0510010401_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0510010401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Mar 3 15:46:57 2012] fullrun_pn_xmm0510010401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Sat Mar 3 15:46:57 2012] fullrun_pn_xmm0510010401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Sat Mar 3 15:46:57 2012] Fit fullrun_pn_xmm0510010401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Sat Mar 3 17:17:29 2012] Spatial fit model total counts = 637.022000, observed total counts = 640.000000 [Sat Mar 3 17:17:29 2012] Offset between fit and detection position for source 1 = 8.884602 pixels [Sat Mar 3 17:17:29 2012] 650.531000 total counts/ 413.767000 bgd. counts: snr = 11.639592 Spatial fit parameters: Offset between fit and detection position for source 1 = 8.884602 pixels Position = (457.8, 301.9) = 17 48 12.74 -27 31 34.1 Extent = 25.0 (24.9-50.0)", rotation angle = 0 Source counts = 236.8 +/- 25.5 Background counts = 413.8 Rate = 0.03 +/- 0.003 [Sat Mar 3 17:17:29 2012] Vigneting correction estimate = 1.000000 [Sat Mar 3 17:17:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Mar 3 17:17:29 2012] Assessing source extent using major axis lower bound [Sat Mar 3 17:17:29 2012] Source does appear to be extended [Sat Mar 3 17:17:29 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Mar 3 17:17:29 2012] Source is confused with source 6 [Sat Mar 3 17:17:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Mar 3 17:17:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Mar 3 17:17:41 2012] Initial guess for spatial extent in simple fitting = 24.98" [Sat Mar 3 17:17:41 2012] source mask rpix=5.7, npix_max = 155, mask sum = 144, frac = 0.924 [Sat Mar 3 17:17:41 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 24.98" [Sat Mar 3 17:33:56 2012] fullrun_pn_xmm0510010401_pi300-10000_cl_pass1_src1.ximg exists [Sat Mar 3 17:33:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510010401_pi300-10000_cl_pass1_src1.csv [Sat Mar 3 17:33:56 2012] fullrun_pn_xmm0510010401_pi300-10000_cl_pass1_src1_1.ximg exists [Sat Mar 3 17:33:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510010401_pi300-10000_cl_pass1_src1.csv [Sat Mar 3 17:33:56 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0510010401_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0510010401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Mar 3 17:33:56 2012] fullrun_pn_xmm0510010401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Sat Mar 3 17:33:56 2012] fullrun_pn_xmm0510010401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Sat Mar 3 17:33:56 2012] Fit fullrun_pn_xmm0510010401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Sat Mar 3 18:46:22 2012] Warning, spatial fit 1 centroid is now closest to src. 6 [Sat Mar 3 18:46:22 2012] Source 1 is offset by 6.323402 and -7.693908 pixels which is larger than 2 X fitted extent = 1.359853 x 1.359853, not incorporating fit results [Sat Mar 3 18:46:22 2012] Vigneting correction estimate = 1.000000 [Sat Mar 3 18:46:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Mar 3 18:46:22 2012] Assessing source extent using major axis lower bound [Sat Mar 3 18:46:22 2012] Source does appear to be extended [Sat Mar 3 18:46:22 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Mar 3 18:46:33 2012] XMMSAS src. selection expression = ellipse(39776.560000, 26215.174000, 1498.926043, 1498.926043, 0.000000, X, Y) [Sat Mar 3 18:46:33 2012] Writing source region out to fullrun_pn_xmm0510010401_pi300-10000_pass1_cl_src1_src.reg [Sat Mar 3 18:46:33 2012] Extracting stamp from image fullrun_pn_xmm0510010401_pi300-10000_cl_sm2.00.img.gz, (372, 216) - (544, 388) [Sat Mar 3 18:46:33 2012] XMMSAS bgd. selection expression = annulus(39776.560000, 26215.174000, 2498.210072, 4996.420144, X, Y) && !ellipse(42649.626000, 27753.599800, 1598.768046, 1598.768046, 0.000000, X, Y) && !ellipse(40868.788000, 26802.672000, 2067.304059, 2067.304059, 0.000000, X, Y) && !ellipse(36512.134888, 26851.919647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40402.931641, 22921.886871, 870.000000, 870.000000, 0.000000, X, Y) [Sat Mar 3 18:46:33 2012] Writing fullrun_pn_xmm0510010401_pi300-10000_pass1_cl_src1.gif [Sat Mar 3 18:46:39 2012] Mean detx,y = (-14902.56, 945.61) [Sat Mar 3 18:46:41 2012] Setting backscal keywords in source and bgd. spectrum [Sat Mar 3 18:47:17 2012] Binned source spectrum to 10 counts/bin [Sat Mar 3 18:47:17 2012] Setting source spectrum file to fullrun_pn_xmm0510010401_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sat Mar 3 18:47:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0510010401_pi300-10000_pass1_cl_src1_bgd.pi.gz [Sat Mar 3 19:57:57 2012] Updating aperture counts using extracted products [Sat Mar 3 19:57:57 2012] Error reading totcts from fullrun_pn_xmm0510010401_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sat Mar 3 19:57:57 2012] Calculating source flux in energy range 0.30-8.00 [Sat Mar 3 19:57:57 2012] Using photon index=1.80, rate=0.0293, arf fullrun_pn_xmm0510010401_pi300-10000_pass1_cl_src1.arf [Sat Mar 3 19:57:57 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Mar 3 19:57:57 2012] Updating source flux to 1.9e-13 [Sat Mar 3 19:59:37 2012] Flag b found in src. 1 procflags, skipping spectral fitting [Sat Mar 3 19:59:37 2012] Flag c found in src. 1 procflags, skipping spectral fitting [Sat Mar 3 20:00:14 2012] Reading fit data from xmm0510010401/analysis//spectral/fullrun_pn_xmm0510010401_pi300-10000_pass1_cl_src1_pl.csv [Sat Mar 3 20:00:14 2012] Spectral fit parameter nH value = 3.79374e+22 [Sat Mar 3 20:00:14 2012] Spectral fit parameter PhoIndex value = 2.3435 [Sat Mar 3 20:00:14 2012] Failed to get F(0.3-8.0) from xmm0510010401/analysis//spectral/fullrun_pn_xmm0510010401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Sat Mar 3 20:00:14 2012] Calculating source flux in energy range 0.30-8.00 [Sat Mar 3 20:00:14 2012] Using Nh = 3.8e+22, photon index=2.34, rate=0.0293, arf fullrun_pn_xmm0510010401_pi300-10000_pass1_cl_src1.arf [Sat Mar 3 20:00:14 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Mar 3 20:00:14 2012] Updating source flux to 5.9e-13