[Sat Mar  3 15:19:32 2012] Detection parameters:
  Position = (398.2, 312.1) = 17 48 32.21 -27 30 52.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26.0 +/- 7.6
  Background counts = 8.2
  Rate = 0.004 +/- 0.001

[Sat Mar  3 15:19:32 2012] Off-axis axis estimate = 7.30'
[Sat Mar  3 16:55:06 2012] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 16:55:06 2012] Initial guess for spatial extent in simple fitting = 10.08"
[Sat Mar  3 16:55:06 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.134
[Sat Mar  3 16:55:06 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.08"
[Sat Mar  3 17:17:26 2012] fullrun_mos2_xmm0510010401_pi300-10000_cl_pass0_src11.ximg exists
[Sat Mar  3 17:17:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510010401_pi300-10000_cl_pass0_src11.csv
[Sat Mar  3 17:17:26 2012] fullrun_mos2_xmm0510010401_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Mar  3 17:17:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510010401_pi300-10000_cl_pass0_src11.csv
[Sat Mar  3 17:17:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510010401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510010401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 17:17:27 2012] fullrun_mos2_xmm0510010401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Mar  3 17:17:27 2012] fullrun_mos2_xmm0510010401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Mar  3 17:17:27 2012] Fit fullrun_mos2_xmm0510010401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Mar  3 17:17:35 2012] Spatial fit model total counts = 117.000000, observed total counts = 117.000000
[Sat Mar  3 17:17:35 2012] Offset between fit and detection position for source 15 = 1.408180 pixels
[Sat Mar  3 17:17:35 2012] 116.305400 total counts/ 62.046600 bgd. counts: snr = 6.888286
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 1.408180 pixels
  Position = (399.1, 313.1) = 17 48 31.92 -27 30 45.5
  Extent = 13.2 (6.2-16.7)", rotation angle = 0
  Source counts = 54.3 +/- 10.8
  Background counts = 62.0
  Rate = 0.005 +/- 0.0009
[Sat Mar  3 17:17:35 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 17:17:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 17:17:35 2012] Assessing source extent using major axis lower bound
[Sat Mar  3 17:17:35 2012] Source does appear to be extended
[Sat Mar  3 17:17:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 18:25:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar  3 18:25:35 2012] Initial guess for spatial extent in simple fitting = 13.17"
[Sat Mar  3 18:25:35 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.984
[Sat Mar  3 18:25:35 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.17"
[Sat Mar  3 18:46:20 2012] fullrun_mos2_xmm0510010401_pi300-10000_cl_pass1_src10.ximg exists
[Sat Mar  3 18:46:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510010401_pi300-10000_cl_pass1_src10.csv
[Sat Mar  3 18:46:20 2012] fullrun_mos2_xmm0510010401_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Mar  3 18:46:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510010401_pi300-10000_cl_pass1_src10.csv
[Sat Mar  3 18:46:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510010401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510010401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 18:46:20 2012] fullrun_mos2_xmm0510010401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Mar  3 18:46:20 2012] fullrun_mos2_xmm0510010401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Mar  3 18:46:20 2012] Fit fullrun_mos2_xmm0510010401_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Mar  3 18:46:28 2012] Warning, spatial fit 10 centroid is now closest to src. 10
[Sat Mar  3 18:46:28 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 18:46:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 18:46:28 2012] Assessing source extent using major axis lower bound
[Sat Mar  3 18:46:28 2012] Source does appear to be extended
[Sat Mar  3 18:46:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 19:40:02 2012] XMMSAS src. selection expression = ellipse(34675.811600, 27194.867200, 790.194023, 790.194023, 0.000000, X, Y)
[Sat Mar  3 19:40:02 2012] Writing source region out to fullrun_mos2_xmm0510010401_pi300-10000_pass1_cl_src15_src.reg
[Sat Mar  3 19:40:02 2012] Extracting stamp from image fullrun_mos2_xmm0510010401_pi300-10000_cl_sm2.00.img.gz, (354, 268) - (445, 359)
[Sat Mar  3 19:40:02 2012] XMMSAS bgd. selection expression = annulus(34675.811600, 27194.867200, 1316.990038, 2633.980076, X, Y) && !ellipse(38188.313800, 28029.846800, 1588.592046, 225.085606, 161.381138, X, Y) && !ellipse(37389.900400, 25122.713000, 1298.880037, 284.514408, 174.094635, X, Y) && !ellipse(35499.508200, 29376.687400, 1546.536045, 225.085606, 169.168802, X, Y)
[Sat Mar  3 19:40:02 2012] Writing fullrun_mos2_xmm0510010401_pi300-10000_pass1_cl_src15.gif
[Sat Mar  3 19:42:07 2012] Mean detx,y = (10019.64, -2460.33) 
[Sat Mar  3 19:42:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar  3 19:42:13 2012] Binned source spectrum to 10 counts/bin
[Sat Mar  3 19:42:13 2012] Setting source spectrum file to fullrun_mos2_xmm0510010401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Mar  3 19:42:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0510010401_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sat Mar  3 19:53:56 2012] Not generating rmf since there are only 54 counts
[Sat Mar  3 19:53:56 2012] rmf not generated due to insufficient counts
[Sat Mar  3 19:57:58 2012] Updating aperture counts using extracted products
[Sat Mar  3 19:57:58 2012] Error reading totcts from fullrun_mos2_xmm0510010401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Mar  3 19:57:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar  3 19:57:58 2012] Using photon index=1.80, rate=0.00454, arf fullrun_mos2_xmm0510010401_pi300-10000_pass1_cl_src15.arf
[Sat Mar  3 19:57:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar  3 19:57:58 2012] Updating source flux to 8.4e-14
[Sat Mar  3 19:59:07 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting