[Sat Mar  3 15:19:18 2012] Detection parameters:
  Position = (359.2, 393.0) = 17 48 44.98 -27 24 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.3 +/- 7.3
  Background counts = 7.6
  Rate = 0.002 +/- 0.0006

[Sat Mar  3 15:19:19 2012] Off-axis axis estimate = 8.15'
[Sat Mar  3 15:46:57 2012] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 15:46:57 2012] Initial guess for spatial extent in simple fitting = 10.50"
[Sat Mar  3 15:46:57 2012] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.030
[Sat Mar  3 15:46:57 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 10.50"
[Sat Mar  3 16:55:06 2012] fullrun_mos1_xmm0510010401_pi300-10000_cl_pass0_src37.ximg exists
[Sat Mar  3 16:55:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510010401_pi300-10000_cl_pass0_src37.csv
[Sat Mar  3 16:55:06 2012] fullrun_mos1_xmm0510010401_pi300-10000_cl_pass0_src37_1.ximg exists
[Sat Mar  3 16:55:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510010401_pi300-10000_cl_pass0_src37.csv
[Sat Mar  3 16:55:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510010401_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510010401_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 16:55:06 2012] fullrun_mos1_xmm0510010401_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sat Mar  3 16:55:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510010401_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sat Mar  3 16:55:06 2012] fullrun_mos1_xmm0510010401_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sat Mar  3 16:55:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510010401_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sat Mar  3 16:55:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510010401_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510010401_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 17:17:33 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 12.841818 pixels away
[Sat Mar  3 17:17:33 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 17:17:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 17:17:33 2012] Assessing source extent using major
[Sat Mar  3 17:17:33 2012] Source does appear to be extended
[Sat Mar  3 17:17:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 17:33:56 2012] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 17:33:56 2012] Initial guess for spatial extent in simple fitting = 10.50"
[Sat Mar  3 17:33:56 2012] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.030
[Sat Mar  3 17:33:56 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 10.50"
[Sat Mar  3 18:25:35 2012] fullrun_mos1_xmm0510010401_pi300-10000_cl_pass1_src31.ximg exists
[Sat Mar  3 18:25:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510010401_pi300-10000_cl_pass1_src31.csv
[Sat Mar  3 18:25:35 2012] fullrun_mos1_xmm0510010401_pi300-10000_cl_pass1_src31_1.ximg exists
[Sat Mar  3 18:25:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510010401_pi300-10000_cl_pass1_src31.csv
[Sat Mar  3 18:25:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510010401_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510010401_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 18:25:35 2012] fullrun_mos1_xmm0510010401_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Sat Mar  3 18:25:35 2012] fullrun_mos1_xmm0510010401_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Sat Mar  3 18:25:35 2012] Fit fullrun_mos1_xmm0510010401_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Sat Mar  3 18:46:26 2012] Spatial fit model total counts = 72.470400, observed total counts = 67.000000
[Sat Mar  3 18:46:26 2012] Offset between fit and detection position for source 7 = 0.454925 pixels
[Sat Mar  3 18:46:26 2012] 74.607200 total counts/ 47.294600 bgd. counts: snr = 3.971525
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.454925 pixels
  Position = (359.7, 393.0) = 17 48 44.84 -27 24 58.3
  Extent = 6.6 (2.6-9.7)", rotation angle = 0
  Source counts = 27.3 +/- 8.6
  Background counts = 47.3
  Rate = 0.002 +/- 0.0007
[Sat Mar  3 18:46:26 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 18:46:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 18:46:26 2012] Assessing source extent using major axis lower bound
[Sat Mar  3 18:46:26 2012] Source does appear to be extended
[Sat Mar  3 18:46:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 19:02:50 2012] XMMSAS src. selection expression = ellipse(31242.489200, 34142.715600, 397.185353, 397.185353, 0.000000, X, Y)
[Sat Mar  3 19:02:50 2012] Writing source region out to fullrun_mos1_xmm0510010401_pi300-10000_pass1_cl_src7_src.reg
[Sat Mar  3 19:02:50 2012] Extracting stamp from image fullrun_mos1_xmm0510010401_pi300-10000_cl_sm2.00.img.gz, (337, 370) - (382, 416)
[Sat Mar  3 19:02:50 2012] XMMSAS bgd. selection expression = annulus(31242.489200, 34142.715600, 661.975589, 1323.951177, X, Y)
[Sat Mar  3 19:02:50 2012] Writing fullrun_mos1_xmm0510010401_pi300-10000_pass1_cl_src7.gif
[Sat Mar  3 19:08:42 2012] Mean detx,y = (-9305.33, -7190.08) 
[Sat Mar  3 19:08:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar  3 19:08:49 2012] Binned source spectrum to 10 counts/bin
[Sat Mar  3 19:08:49 2012] Setting source spectrum file to fullrun_mos1_xmm0510010401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Mar  3 19:08:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0510010401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Mar  3 19:39:52 2012] Not generating rmf since there are only 27 counts
[Sat Mar  3 19:39:52 2012] rmf not generated due to insufficient counts
[Sat Mar  3 19:57:58 2012] Updating aperture counts using extracted products
[Sat Mar  3 19:57:58 2012] Error reading totcts from fullrun_mos1_xmm0510010401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Mar  3 19:57:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar  3 19:57:58 2012] Using photon index=1.80, rate=0.00231, arf fullrun_mos1_xmm0510010401_pi300-10000_pass1_cl_src7.arf
[Sat Mar  3 19:57:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar  3 19:57:58 2012] Updating source flux to 5.7e-14
[Sat Mar  3 19:57:59 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting