[Sat Mar  3 15:19:19 2012] Detection parameters:
  Position = (473.0, 316.7) = 17 48 7.77 -27 30 26.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.1 +/- 9.6
  Background counts = 7.6
  Rate = 0.004 +/- 0.0008

[Sat Mar  3 15:19:19 2012] Off-axis axis estimate = 12.72'
[Sat Mar  3 15:46:57 2012] Using EEF radius (= 12.79 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 15:46:57 2012] Initial guess for spatial extent in simple fitting = 12.79"
[Sat Mar  3 15:46:57 2012] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.887
[Sat Mar  3 15:46:57 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 12.79"
[Sat Mar  3 16:55:06 2012] fullrun_mos1_xmm0510010401_pi300-10000_cl_pass0_src31.ximg exists
[Sat Mar  3 16:55:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510010401_pi300-10000_cl_pass0_src31.csv
[Sat Mar  3 16:55:06 2012] fullrun_mos1_xmm0510010401_pi300-10000_cl_pass0_src31_1.ximg exists
[Sat Mar  3 16:55:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510010401_pi300-10000_cl_pass0_src31.csv
[Sat Mar  3 16:55:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510010401_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510010401_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 16:55:06 2012] fullrun_mos1_xmm0510010401_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sat Mar  3 16:55:06 2012] fullrun_mos1_xmm0510010401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sat Mar  3 16:55:06 2012] Fit fullrun_mos1_xmm0510010401_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Sat Mar  3 17:17:33 2012] Warning, spatial fit 31 centroid is now closest to src. 37
[Sat Mar  3 17:17:33 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 14.303973 pixels away
[Sat Mar  3 17:17:33 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 17:17:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 17:17:33 2012] Assessing source extent using major
[Sat Mar  3 17:17:33 2012] Source does appear to be extended
[Sat Mar  3 17:17:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 17:33:56 2012] Using EEF radius (= 12.79 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 17:33:56 2012] Initial guess for spatial extent in simple fitting = 12.79"
[Sat Mar  3 17:33:56 2012] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.887
[Sat Mar  3 17:33:56 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 12.79"
[Sat Mar  3 18:25:35 2012] fullrun_mos1_xmm0510010401_pi300-10000_cl_pass1_src26.ximg exists
[Sat Mar  3 18:25:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510010401_pi300-10000_cl_pass1_src26.csv
[Sat Mar  3 18:25:35 2012] fullrun_mos1_xmm0510010401_pi300-10000_cl_pass1_src26_1.ximg exists
[Sat Mar  3 18:25:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510010401_pi300-10000_cl_pass1_src26.csv
[Sat Mar  3 18:25:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510010401_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510010401_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 18:25:35 2012] fullrun_mos1_xmm0510010401_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sat Mar  3 18:25:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510010401_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sat Mar  3 18:25:35 2012] fullrun_mos1_xmm0510010401_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sat Mar  3 18:25:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510010401_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sat Mar  3 18:25:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510010401_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510010401_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 18:46:26 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 15.018264 pixels away
[Sat Mar  3 18:46:26 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 18:46:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 18:46:26 2012] Assessing source extent using major
[Sat Mar  3 18:46:26 2012] Source does appear to be extended
[Sat Mar  3 18:46:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 19:02:50 2012] XMMSAS src. selection expression = ellipse(41100.267120, 27504.570984, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar  3 19:02:50 2012] Writing source region out to fullrun_mos1_xmm0510010401_pi300-10000_pass1_cl_src33_src.reg
[Sat Mar  3 19:02:50 2012] Extracting stamp from image fullrun_mos1_xmm0510010401_pi300-10000_cl_sm2.00.img.gz, (435, 279) - (510, 354)
[Sat Mar  3 19:02:50 2012] XMMSAS bgd. selection expression = annulus(41100.267120, 27504.570984, 1087.500000, 2175.000000, X, Y) && !ellipse(41187.569000, 29299.032400, 1000.840029, 1000.840029, 0.000000, X, Y) && !ellipse(38522.682373, 28124.756622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38339.982000, 28358.940000, 1839.176053, 1111.312032, 133.059000, X, Y) && !ellipse(38907.669586, 28714.085510, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar  3 19:02:50 2012] Writing fullrun_mos1_xmm0510010401_pi300-10000_pass1_cl_src33.gif
[Sat Mar  3 19:08:05 2012] Mean detx,y = (-2112.35, -16556.22) 
[Sat Mar  3 19:08:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar  3 19:08:14 2012] Binned source spectrum to 10 counts/bin
[Sat Mar  3 19:08:15 2012] Setting source spectrum file to fullrun_mos1_xmm0510010401_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat Mar  3 19:08:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0510010401_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sat Mar  3 19:39:35 2012] Not generating rmf since there are only 44 counts
[Sat Mar  3 19:39:35 2012] rmf not generated due to insufficient counts
[Sat Mar  3 19:57:58 2012] Updating aperture counts using extracted products
[Sat Mar  3 19:57:58 2012] Error reading totcts from fullrun_mos1_xmm0510010401_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat Mar  3 19:57:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar  3 19:57:58 2012] Using photon index=1.80, rate=0.00369, arf fullrun_mos1_xmm0510010401_pi300-10000_pass1_cl_src33.arf
[Sat Mar  3 19:57:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar  3 19:57:58 2012] Updating source flux to 1.3e-13
[Sat Mar  3 19:57:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting