[Sat Sep  8 14:15:00 2012] Detection parameters:
  Position = (283.4, 329.1) = 5 43 32.96 -68 21 22.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.6 +/- 14.5
  Background counts = 137.3
  Rate = 0.002 +/- 0.0004

[Sat Sep  8 14:15:00 2012] Off-axis axis estimate = 2.48'
[Sat Sep  8 14:37:46 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Sat Sep  8 14:37:46 2012] Initial guess for spatial extent in simple fitting = 7.67"
[Sat Sep  8 14:37:46 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.977
[Sat Sep  8 14:37:46 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.67"
[Sat Sep  8 14:50:39 2012] fullrun_mos1_xmm0506531701_pi300-10000_cl_pass0_src12.ximg exists
[Sat Sep  8 14:50:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506531701_pi300-10000_cl_pass0_src12.csv
[Sat Sep  8 14:50:39 2012] fullrun_mos1_xmm0506531701_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat Sep  8 14:50:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506531701_pi300-10000_cl_pass0_src12.csv
[Sat Sep  8 14:50:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506531701_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506531701_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  8 14:50:39 2012] fullrun_mos1_xmm0506531701_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat Sep  8 14:50:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506531701_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat Sep  8 14:50:39 2012] fullrun_mos1_xmm0506531701_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Sep  8 14:50:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506531701_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat Sep  8 14:50:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506531701_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506531701_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  8 15:15:30 2012] Source 10 is offset by -2.610821 and -7.955334 pixels which is larger than
2 X fitted extent = 7.050023 x 7.050023, not incorporating fit results
[Sat Sep  8 15:15:30 2012] Vigneting correction estimate = 1.000000
[Sat Sep  8 15:15:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  8 15:15:30 2012] Assessing source extent using major
[Sat Sep  8 15:15:30 2012] Source does appear to be extended
[Sat Sep  8 15:15:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  8 15:15:30 2012] Deleting source due to low Poisson probability 0.8