[Sun Jun 30 08:47:22 2013] Detection parameters:
  Position = (151.5, 366.1) = 5 45 17.77 -68 16 0.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.8 +/- 7.4
  Background counts = 2.5
  Rate = 0.006 +/- 0.001

[Sun Jun 30 08:47:22 2013] Off-axis axis estimate = 11.73'
[Sun Jun 30 08:57:39 2013] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Sun Jun 30 08:57:39 2013] Initial guess for spatial extent in simple fitting = 12.29"
[Sun Jun 30 08:57:39 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.949
[Sun Jun 30 08:57:39 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 12.29"
[Sun Jun 30 09:04:03 2013] fullrun_mos2_xmm0506531601_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun 30 09:04:03 2013] fullrun_mos2_xmm0506531601_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun 30 09:04:03 2013] Fit fullrun_mos2_xmm0506531601_pi300-10000_cl_pass0_src5 appears to have run properly
[Sun Jun 30 09:04:03 2013] fullrun_mos2_xmm0506531601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun 30 09:04:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506531601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun 30 09:04:03 2013] fullrun_mos2_xmm0506531601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun 30 09:04:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506531601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun 30 09:04:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506531601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506531601_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 09:04:06 2013] Spatial fit model total counts = 65.211700, observed total counts = 61.000000
[Sun Jun 30 09:04:06 2013] Offset between fit and detection position for source 4 = 0.072190 pixels
[Sun Jun 30 09:04:06 2013] 68.591000 total counts/ 29.881800 bgd. counts: snr = 7.081265
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.072190 pixels
  Position = (151.5, 366.2) = 5 45 17.81 -68 15 59.5
  Extent = 14.1 (9.0-19.8)" x 4.1 (3.1-5.5)", rotation angle = 122 (102-133) degrees
  Source counts = 38.7 +/- 8.3
  Background counts = 29.9
  Rate = 0.006 +/- 0.001
[Sun Jun 30 09:04:06 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 09:04:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 09:04:06 2013] Assessing source extent using major axis lower bound
[Sun Jun 30 09:04:06 2013] Source does appear to be extended
[Sun Jun 30 09:04:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.65
[Sun Jun 30 09:04:06 2013] Source is asymmetric
[Sun Jun 30 09:12:29 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 30 09:12:29 2013] Initial guess for spatial extent in simple fitting = 9.12"
[Sun Jun 30 09:12:29 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.926
[Sun Jun 30 09:12:29 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 9.12"
[Sun Jun 30 09:18:53 2013] fullrun_mos2_xmm0506531601_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jun 30 09:18:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506531601_pi300-10000_cl_pass1_src5.csv
[Sun Jun 30 09:18:53 2013] fullrun_mos2_xmm0506531601_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jun 30 09:18:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506531601_pi300-10000_cl_pass1_src5.csv
[Sun Jun 30 09:18:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506531601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506531601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 09:18:53 2013] fullrun_mos2_xmm0506531601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jun 30 09:18:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506531601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jun 30 09:18:53 2013] fullrun_mos2_xmm0506531601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jun 30 09:18:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506531601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jun 30 09:18:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506531601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506531601_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 30 09:18:56 2013] Warning, spatial fit 5 centroid is now closest to src. 3
[Sun Jun 30 09:18:56 2013] Vigneting correction estimate = 1.000000
[Sun Jun 30 09:18:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 30 09:18:56 2013] Assessing source extent using major axis lower bound
[Sun Jun 30 09:18:56 2013] Source does appear to be extended
[Sun Jun 30 09:18:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.65
[Sun Jun 30 09:18:56 2013] Source is asymmetric
[Sun Jun 30 09:27:24 2013] XMMSAS src. selection expression = ellipse(13129.532320, 31809.917600, 846.180024, 248.751607, 122.106008, X, Y)
[Sun Jun 30 09:27:24 2013] Writing source region out to fullrun_mos2_xmm0506531601_pi300-10000_pass1_cl_src4_src.reg
[Sun Jun 30 09:27:24 2013] Extracting stamp from image fullrun_mos2_xmm0506531601_pi300-10000_cl_sm2.00.img.gz, (103, 318) - (200, 415)
[Sun Jun 30 09:27:24 2013] XMMSAS bgd. selection expression = annulus(13129.532320, 31809.917600, 1410.300041, 2820.600081, X, Y)
[Sun Jun 30 09:27:24 2013] Writing fullrun_mos2_xmm0506531601_pi300-10000_pass1_cl_src4.gif
[Sun Jun 30 09:27:59 2013] Mean detx,y = (-11728.34, -7236.69) 
[Sun Jun 30 09:28:00 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 30 09:28:10 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 30 09:28:10 2013] Setting source spectrum file to fullrun_mos2_xmm0506531601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun 30 09:28:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0506531601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jun 30 09:31:49 2013] Not generating rmf since there are only 38 counts
[Sun Jun 30 09:31:49 2013] rmf not generated due to insufficient counts
[Sun Jun 30 09:32:05 2013] Updating aperture counts using extracted products
[Sun Jun 30 09:32:05 2013] Total counts from fullrun_mos2_xmm0506531601_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 32.00
[Sun Jun 30 09:32:05 2013] Total counts from fullrun_mos2_xmm0506531601_pi300-10000_pass1_cl_src4_bgd.pi.gz = 195.00
[Sun Jun 30 09:32:05 2013] Got source and background scale factors 569328.000000, 15233205.000000
[Sun Jun 30 09:32:05 2013] User source parameters:
  Position = (151.5, 366.2) = 5 45 17.81 -68 15 59.5
  Extent = 14.1 (9.0-19.8)" x 4.1 (3.1-5.5)", rotation angle = 122 (102-133) degrees
  Source aperture counts = 24.7 +/- 6.7
  Background aperture counts = 7.3
  Rate = 0.004 +/- 0.001

[Sun Jun 30 09:32:05 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 30 09:32:05 2013] Using photon index=1.80, rate=0.00594, arf fullrun_mos2_xmm0506531601_pi300-10000_pass1_cl_src4.arf
[Sun Jun 30 09:32:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 30 09:32:05 2013] Updating source flux to 1.8e-13
[Sun Jun 30 09:32:07 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 30 09:32:08 2013] xmm0506531601/analysis//spectral/fullrun_mos2_xmm0506531601_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete