[Mon Jul 30 00:27:03 2012] Detection parameters:
  Position = (341.4, 481.0) = 5 42 42.58 -68 8 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.7 +/- 7.0
  Background counts = 2.9
  Rate = 0.005 +/- 0.001

[Mon Jul 30 00:27:03 2012] Off-axis axis estimate = 13.60'
[Mon Jul 30 00:41:17 2012] Using EEF radius (= 13.23 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 00:41:17 2012] Initial guess for spatial extent in simple fitting = 13.23"
[Mon Jul 30 00:41:17 2012] source mask rpix=3.0, npix_max = 50, mask sum = 56, frac = 1.117
[Mon Jul 30 00:41:17 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 13.23"
[Mon Jul 30 00:54:37 2012] fullrun_mos2_xmm0506531501_pi300-10000_cl_pass0_src7.ximg exists
[Mon Jul 30 00:54:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506531501_pi300-10000_cl_pass0_src7.csv
[Mon Jul 30 00:54:37 2012] fullrun_mos2_xmm0506531501_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Jul 30 00:54:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506531501_pi300-10000_cl_pass0_src7.csv
[Mon Jul 30 00:54:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506531501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506531501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 00:54:37 2012] fullrun_mos2_xmm0506531501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Jul 30 00:54:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506531501_pi300-10000_cl_pass0_tfrozen_src7.csv
[Mon Jul 30 00:54:37 2012] fullrun_mos2_xmm0506531501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Jul 30 00:54:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506531501_pi300-10000_cl_pass0_tfrozen_src7.csv
[Mon Jul 30 00:54:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506531501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506531501_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 00:54:46 2012] Spatial fit model total counts = 67.581400, observed total counts = 58.000000
[Mon Jul 30 00:54:46 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 30 00:54:46 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 00:54:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 00:54:46 2012] Assessing source extent using major
[Mon Jul 30 00:54:46 2012] Source does appear to be extended
[Mon Jul 30 00:54:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 00:54:46 2012] Deleting source due to low Poisson probability 0.9