[Sun Aug 19 11:34:05 2012] Detection parameters:
  Position = (448.9, 273.9) = 5 41 34.11 -68 25 48.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 756.6 +/- 35.2
  Background counts = 61.8
  Rate = 0.08 +/- 0.004

[Sun Aug 19 11:34:05 2012] Off-axis axis estimate = 11.05'
[Sun Aug 19 11:43:55 2012] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 11:43:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 19 11:43:55 2012] Initial guess for spatial extent in simple fitting = 11.96"
[Sun Aug 19 11:43:55 2012] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.853
[Sun Aug 19 11:43:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.96"
[Sun Aug 19 11:49:38 2012] fullrun_mos2_xmm0506531001_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug 19 11:49:38 2012] fullrun_mos2_xmm0506531001_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug 19 11:49:38 2012] Fit fullrun_mos2_xmm0506531001_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun Aug 19 11:49:38 2012] fullrun_mos2_xmm0506531001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug 19 11:49:38 2012] fullrun_mos2_xmm0506531001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug 19 11:49:38 2012] Fit fullrun_mos2_xmm0506531001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Aug 19 11:49:43 2012] Spatial fit model total counts = 1265.990000, observed total counts = 1266.000000
[Sun Aug 19 11:49:43 2012] Offset between fit and detection position for source 1 = 0.375445 pixels
[Sun Aug 19 11:49:43 2012] 1260.651000 total counts/ 856.299000 bgd. counts: snr = 13.818054
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.375445 pixels
  Position = (448.6, 273.7) = 5 41 34.36 -68 25 48.4
  Extent = 6.2 (5.7-7.0)", rotation angle = 0
  Source counts = 404.4 +/- 35.5
  Background counts = 856.3
  Rate = 0.06 +/- 0.005
[Sun Aug 19 11:49:43 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 11:49:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 11:49:43 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 11:49:43 2012] Source does appear to be extended
[Sun Aug 19 11:49:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 11:53:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 19 11:53:08 2012] Initial guess for spatial extent in simple fitting = 6.24"
[Sun Aug 19 11:53:08 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.068
[Sun Aug 19 11:53:08 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.24"
[Sun Aug 19 11:58:13 2012] fullrun_mos2_xmm0506531001_pi300-10000_cl_pass1_src1.ximg exists
[Sun Aug 19 11:58:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506531001_pi300-10000_cl_pass1_src1.csv
[Sun Aug 19 11:58:13 2012] fullrun_mos2_xmm0506531001_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Aug 19 11:58:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506531001_pi300-10000_cl_pass1_src1.csv
[Sun Aug 19 11:58:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506531001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506531001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 11:58:13 2012] fullrun_mos2_xmm0506531001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Aug 19 11:58:13 2012] fullrun_mos2_xmm0506531001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Aug 19 11:58:13 2012] Fit fullrun_mos2_xmm0506531001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Aug 19 11:58:17 2012] Spatial fit model total counts = 898.974000, observed total counts = 899.000000
[Sun Aug 19 11:58:17 2012] Offset between fit and detection position for source 1 = 0.031547 pixels
[Sun Aug 19 11:58:17 2012] 892.631000 total counts/ 507.877000 bgd. counts: snr = 17.072765
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.031547 pixels
  Position = (448.6, 273.8) = 5 41 34.34 -68 25 48.4
  Extent = 6.0 (5.4-6.8)", rotation angle = 0
  Source counts = 384.8 +/- 29.9
  Background counts = 507.9
  Rate = 0.05 +/- 0.004
[Sun Aug 19 11:58:17 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 11:58:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 11:58:17 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 11:58:17 2012] Source does appear to be extended
[Sun Aug 19 11:58:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 12:08:49 2012] XMMSAS src. selection expression = ellipse(38982.523600, 23767.801400, 357.016210, 357.016210, 0.000000, X, Y)
[Sun Aug 19 12:08:49 2012] Writing source region out to fullrun_mos2_xmm0506531001_pi300-10000_pass1_cl_src1_src.reg
[Sun Aug 19 12:08:49 2012] Extracting stamp from image fullrun_mos2_xmm0506531001_pi300-10000_cl_sm2.00.img.gz, (428, 253) - (469, 294)
[Sun Aug 19 12:08:49 2012] XMMSAS bgd. selection expression = annulus(38982.523600, 23767.801400, 595.027017, 1190.054034, X, Y)
[Sun Aug 19 12:08:49 2012] Writing fullrun_mos2_xmm0506531001_pi300-10000_pass1_cl_src1.gif
[Sun Aug 19 12:08:53 2012] Mean detx,y = (-8284.54, -10860.43) 
[Sun Aug 19 12:08:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 19 12:09:05 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 19 12:09:05 2012] Setting source spectrum file to fullrun_mos2_xmm0506531001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug 19 12:09:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506531001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Aug 19 12:16:00 2012] Updating aperture counts using extracted products
[Sun Aug 19 12:16:01 2012] Error reading totcts from fullrun_mos2_xmm0506531001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug 19 12:16:01 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 12:16:01 2012] Using photon index=1.80, rate=0.0536, arf fullrun_mos2_xmm0506531001_pi300-10000_pass1_cl_src1.arf
[Sun Aug 19 12:16:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 12:16:01 2012] Updating source flux to 1.4e-12
[Sun Aug 19 12:16:25 2012] Reading fit data from xmm0506531001/analysis//spectral/fullrun_mos2_xmm0506531001_pi300-10000_pass1_cl_src1_pl.csv
[Sun Aug 19 12:16:25 2012] Spectral fit parameter nH value = 3.51008e+21
[Sun Aug 19 12:16:25 2012] Spectral fit parameter PhoIndex value = 1.16223
[Sun Aug 19 12:16:25 2012] Failed to get F(0.3-8.0) from xmm0506531001/analysis//spectral/fullrun_mos2_xmm0506531001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Aug 19 12:16:25 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 12:16:25 2012] Using Nh = 3.5e+21, photon index=1.16, rate=0.0536, arf fullrun_mos2_xmm0506531001_pi300-10000_pass1_cl_src1.arf
[Sun Aug 19 12:16:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 12:16:25 2012] Updating source flux to 2.6e-12