[Mon May 21 10:10:28 2012] Detection parameters:
  Position = (297.1, 321.7) = 5 43 34.27 -68 22 23.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.3 +/- 10.5
  Background counts = 14.9
  Rate = 0.01 +/- 0.002

[Mon May 21 10:10:28 2012] Off-axis axis estimate = 1.69'
[Mon May 21 10:15:16 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Mon May 21 10:15:16 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Mon May 21 10:15:16 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Mon May 21 10:15:16 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.27"
[Mon May 21 10:24:01 2012] fullrun_mos1_xmm0506530801_pi300-10000_cl_pass0_src3.ximg exists
[Mon May 21 10:24:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506530801_pi300-10000_cl_pass0_src3.csv
[Mon May 21 10:24:01 2012] fullrun_mos1_xmm0506530801_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon May 21 10:24:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506530801_pi300-10000_cl_pass0_src3.csv
[Mon May 21 10:24:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506530801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506530801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 10:24:01 2012] fullrun_mos1_xmm0506530801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon May 21 10:24:01 2012] fullrun_mos1_xmm0506530801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May 21 10:24:01 2012] Fit fullrun_mos1_xmm0506530801_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon May 21 10:34:22 2012] Spatial fit model total counts = 131.746000, observed total counts = 121.000000
[Mon May 21 10:34:22 2012] Offset between fit and detection position for source 3 = 0.197705 pixels
[Mon May 21 10:34:22 2012] 131.225100 total counts/ 97.234500 bgd. counts: snr = 3.447058
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.197705 pixels
  Position = (296.9, 321.8) = 5 43 34.41 -68 22 23.7
  Extent = 3.7 (2.7-4.6)", rotation angle = 0
  Source counts = 34.0 +/- 11.5
  Background counts = 97.2
  Rate = 0.007 +/- 0.002
[Mon May 21 10:34:22 2012] Vigneting correction estimate = 1.000000
[Mon May 21 10:34:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 10:34:22 2012] Assessing source extent using major axis lower bound
[Mon May 21 10:34:22 2012] Source does appear to be extended
[Mon May 21 10:34:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 10:36:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 21 10:36:28 2012] Initial guess for spatial extent in simple fitting = 3.65"
[Mon May 21 10:36:28 2012] source mask rpix=0.8, npix_max = 7, mask sum = 4, frac = 0.557
[Mon May 21 10:36:28 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 3.65"
[Mon May 21 10:45:08 2012] fullrun_mos1_xmm0506530801_pi300-10000_cl_pass1_src3.ximg exists
[Mon May 21 10:45:08 2012] fullrun_mos1_xmm0506530801_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon May 21 10:45:08 2012] Fit fullrun_mos1_xmm0506530801_pi300-10000_cl_pass1_src3 appears to have run properly
[Mon May 21 10:45:08 2012] fullrun_mos1_xmm0506530801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon May 21 10:45:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506530801_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon May 21 10:45:08 2012] fullrun_mos1_xmm0506530801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon May 21 10:45:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506530801_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon May 21 10:45:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506530801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506530801_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 10:55:17 2012] Warning, spatial fit 3 centroid is now closest to src. 4
[Mon May 21 10:55:17 2012] Vigneting correction estimate = 1.000000
[Mon May 21 10:55:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 10:55:17 2012] Assessing source extent using major axis lower bound
[Mon May 21 10:55:17 2012] Source does appear to be extended
[Mon May 21 10:55:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 11:00:29 2012] XMMSAS src. selection expression = ellipse(25785.025000, 27951.817840, 219.149406, 219.149406, 0.000000, X, Y)
[Mon May 21 11:00:29 2012] Writing source region out to fullrun_mos1_xmm0506530801_pi300-10000_pass1_cl_src3_src.reg
[Mon May 21 11:00:29 2012] Extracting stamp from image fullrun_mos1_xmm0506530801_pi300-10000_cl_sm2.00.img.gz, (284, 309) - (310, 334)
[Mon May 21 11:00:29 2012] XMMSAS bgd. selection expression = annulus(25785.025000, 27951.817840, 365.249011, 730.498021, X, Y)
[Mon May 21 11:00:29 2012] Writing fullrun_mos1_xmm0506530801_pi300-10000_pass1_cl_src3.gif
[Mon May 21 11:01:29 2012] Mean detx,y = (365.88, -371.38) 
[Mon May 21 11:01:31 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 11:01:44 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 11:01:44 2012] Setting source spectrum file to fullrun_mos1_xmm0506530801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 21 11:01:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0506530801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon May 21 11:02:21 2012] Not generating rmf since there are only 33 counts
[Mon May 21 11:02:21 2012] rmf not generated due to insufficient counts
[Mon May 21 11:09:32 2012] Updating aperture counts using extracted products
[Mon May 21 11:09:32 2012] Error reading totcts from fullrun_mos1_xmm0506530801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 21 11:09:32 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 11:09:32 2012] Using photon index=1.80, rate=0.00711, arf fullrun_mos1_xmm0506530801_pi300-10000_pass1_cl_src3.arf
[Mon May 21 11:09:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 11:09:32 2012] Updating source flux to 9.8e-14
[Mon May 21 11:09:34 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 21 11:09:35 2012] xmm0506530801/analysis//spectral/fullrun_mos1_xmm0506530801_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete