[Sat Jul 14 15:12:34 2012] Detection parameters:
  Position = (450.6, 275.0) = 5 41 34.12 -68 25 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 835.9 +/- 35.7
  Background counts = 5.6
  Rate = 0.08 +/- 0.003

[Sat Jul 14 15:12:34 2012] Off-axis axis estimate = 11.16'
[Sat Jul 14 15:18:15 2012] Using EEF radius (= 12.01 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 15:18:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 15:18:15 2012] Initial guess for spatial extent in simple fitting = 12.01"
[Sat Jul 14 15:18:15 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.988
[Sat Jul 14 15:18:15 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.01"
[Sat Jul 14 15:30:29 2012] fullrun_mos1_xmm0506530601_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 14 15:30:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506530601_pi300-10000_cl_pass0_src1.csv
[Sat Jul 14 15:30:29 2012] fullrun_mos1_xmm0506530601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 14 15:30:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506530601_pi300-10000_cl_pass0_src1.csv
[Sat Jul 14 15:30:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506530601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506530601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 15:30:29 2012] fullrun_mos1_xmm0506530601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 14 15:30:29 2012] fullrun_mos1_xmm0506530601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 14 15:30:29 2012] Fit fullrun_mos1_xmm0506530601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 14 15:46:16 2012] Spatial fit model total counts = 899.895000, observed total counts = 898.000000
[Sat Jul 14 15:46:16 2012] Offset between fit and detection position for source 2 = 0.152630 pixels
[Sat Jul 14 15:46:16 2012] 899.608000 total counts/ 277.974000 bgd. counts: snr = 37.284873
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.152630 pixels
  Position = (450.6, 274.9) = 5 41 34.15 -68 25 47.3
  Extent = 7.6 (7.1-8.1)", rotation angle = 0
  Source counts = 621.6 +/- 30.0
  Background counts = 278.0
  Rate = 0.06 +/- 0.003
[Sat Jul 14 15:46:16 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 15:46:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 15:46:16 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 15:46:16 2012] Source does appear to be extended
[Sat Jul 14 15:46:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 15:47:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 14 15:47:34 2012] Initial guess for spatial extent in simple fitting = 7.59"
[Sat Jul 14 15:47:34 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.992
[Sat Jul 14 15:47:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.59"
[Sat Jul 14 15:58:36 2012] fullrun_mos1_xmm0506530601_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 14 15:58:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506530601_pi300-10000_cl_pass1_src1.csv
[Sat Jul 14 15:58:36 2012] fullrun_mos1_xmm0506530601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 14 15:58:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506530601_pi300-10000_cl_pass1_src1.csv
[Sat Jul 14 15:58:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506530601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506530601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 15:58:36 2012] fullrun_mos1_xmm0506530601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 14 15:58:36 2012] fullrun_mos1_xmm0506530601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 14 15:58:36 2012] Fit fullrun_mos1_xmm0506530601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 14 16:15:23 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Sat Jul 14 16:15:23 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 16:15:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 16:15:23 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 16:15:23 2012] Source does appear to be extended
[Sat Jul 14 16:15:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 16:20:27 2012] XMMSAS src. selection expression = ellipse(39150.152540, 23866.242800, 455.485813, 455.485813, 0.000000, X, Y)
[Sat Jul 14 16:20:27 2012] Writing source region out to fullrun_mos1_xmm0506530601_pi300-10000_pass1_cl_src2_src.reg
[Sat Jul 14 16:20:27 2012] Extracting stamp from image fullrun_mos1_xmm0506530601_pi300-10000_cl_sm2.00.img.gz, (424, 249) - (477, 301)
[Sat Jul 14 16:20:27 2012] XMMSAS bgd. selection expression = annulus(39150.152540, 23866.242800, 759.143022, 1518.286044, X, Y)
[Sat Jul 14 16:20:27 2012] Writing fullrun_mos1_xmm0506530601_pi300-10000_pass1_cl_src2.gif
[Sat Jul 14 16:20:29 2012] Mean detx,y = (-10038.27, 8875.04) 
[Sat Jul 14 16:20:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 16:20:47 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 16:20:47 2012] Setting source spectrum file to fullrun_mos1_xmm0506530601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 14 16:20:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0506530601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jul 14 16:40:25 2012] Updating aperture counts using extracted products
[Sat Jul 14 16:40:25 2012] Error reading totcts from fullrun_mos1_xmm0506530601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 14 16:40:25 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 16:40:25 2012] Using photon index=1.80, rate=0.057, arf fullrun_mos1_xmm0506530601_pi300-10000_pass1_cl_src2.arf
[Sat Jul 14 16:40:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 16:40:25 2012] Updating source flux to 1.3e-12
[Sat Jul 14 16:41:14 2012] Reading fit data from xmm0506530601/analysis//spectral/fullrun_mos1_xmm0506530601_pi300-10000_pass1_cl_src2_pl.csv
[Sat Jul 14 16:41:14 2012] Spectral fit parameter nH value = 1.10442e+21
[Sat Jul 14 16:41:14 2012] Spectral fit parameter PhoIndex value = 0.868375
[Sat Jul 14 16:41:14 2012] Failed to get F(0.3-8.0) from xmm0506530601/analysis//spectral/fullrun_mos1_xmm0506530601_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Jul 14 16:41:14 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 16:41:14 2012] Using Nh = 1.1e+21, photon index=0.87, rate=0.057, arf fullrun_mos1_xmm0506530601_pi300-10000_pass1_cl_src2.arf
[Sat Jul 14 16:41:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 16:41:14 2012] Updating source flux to 2.5e-12