[Wed May 2 12:05:36 2012] Detection parameters: Position = (284.4, 498.1) = 8 40 53.63 -44 50 46.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 316.4 +/- 35.0 Background counts = 265.8 Rate = 0.008 +/- 0.0009 [Wed May 2 12:05:42 2012] Off-axis axis estimate = 14.51' [Wed May 2 12:13:08 2012] Using EEF radius (= 13.68 ")to estimate initial spatial extent for simple fitting [Wed May 2 12:13:08 2012] Initial guess for spatial extent in simple fitting = 13.68" [Wed May 2 12:13:08 2012] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.053 [Wed May 2 12:13:08 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 13.68" [Wed May 2 19:03:24 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src8.ximg exists [Wed May 2 19:03:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src8.csv [Wed May 2 19:03:24 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src8_1.ximg exists [Wed May 2 19:03:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src8.csv [Wed May 2 19:03:24 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 2 19:03:26 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists [Wed May 2 19:03:26 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists [Wed May 2 19:03:26 2012] Fit fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly [Wed May 2 23:35:57 2012] Spatial fit model total counts = 5802.060000, observed total counts = 5747.000000 [Wed May 2 23:35:57 2012] Offset between fit and detection position for source 8 = 2.464595 pixels [Wed May 2 23:35:57 2012] Warning, changing simple spatial fit ID from 8 to 5 [Wed May 2 23:35:57 2012] 5792.235000 total counts/ 4988.790000 bgd. counts: snr = 11.375187 Spatial fit parameters: Offset between fit and detection position for source 8 = 2.464595 pixels Position = (282.1, 498.7) = 8 40 54.60 -44 50 44.5 Extent = 28.0 (28.0-56.1)", rotation angle = 0 Source counts = 803.4 +/- 76.1 Background counts = 4988.8 Rate = 0.02 +/- 0.002 [Wed May 2 23:35:57 2012] Vigneting correction estimate = 1.000000 [Wed May 2 23:35:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 2 23:35:57 2012] Assessing source extent using major axis lower bound [Wed May 2 23:35:57 2012] Source does appear to be extended [Wed May 2 23:35:57 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 2 23:35:57 2012] Source is confused with source 5 [Wed May 2 23:35:57 2012] Source is confused with source 6 [Wed May 2 23:35:57 2012] Source is confused with source 9 [Wed May 2 23:35:57 2012] Source is confused with source 12 [Wed May 2 23:35:57 2012] Source is confused with source 13 [Wed May 2 23:35:57 2012] Source is confused with source 14 [Wed May 2 23:35:57 2012] Source is confused with source 15 [Wed May 2 23:35:57 2012] Source is confused with source 22 [Wed May 2 23:35:57 2012] Source is confused with source 26 [Wed May 2 23:35:57 2012] Source is confused with source 27 [Wed May 2 23:35:57 2012] Source is confused with source 29 [Wed May 2 23:35:57 2012] Source is confused with source 31 [Wed May 2 23:35:57 2012] Source is confused with source 33 [Wed May 2 23:35:57 2012] Source is confused with source 64 [Wed May 2 23:36:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed May 2 23:36:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 2 23:36:30 2012] Initial guess for spatial extent in simple fitting = 28.05" [Wed May 2 23:36:30 2012] source mask rpix=6.4, npix_max = 193, mask sum = 196, frac = 1.015 [Wed May 2 23:36:30 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 28.05" [Thu May 3 10:32:13 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src7.ximg exists [Thu May 3 10:32:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src7.csv [Thu May 3 10:32:13 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src7_1.ximg exists [Thu May 3 10:32:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src7.csv [Thu May 3 10:32:13 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src7_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 3 10:32:15 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists [Thu May 3 10:32:15 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists [Thu May 3 10:32:15 2012] Fit fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly [Thu May 3 13:10:03 2012] Source 8 is offset by -1.878460 and 2.327701 pixels which is larger than 2 X fitted extent = 1.734956 x 1.734956, not incorporating fit results [Thu May 3 13:10:03 2012] Warning, spatial fit 7 centroid is now closest to src. 13 [Thu May 3 13:10:04 2012] Vigneting correction estimate = 1.000000 [Thu May 3 13:10:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 3 13:10:04 2012] Assessing source extent using major axis lower bound [Thu May 3 13:10:04 2012] Source does appear to be extended [Thu May 3 13:10:04 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 3 13:10:40 2012] XMMSAS src. selection expression = ellipse(24490.562000, 43340.856000, 1682.850048, 1682.850048, 0.000000, X, Y) [Thu May 3 13:10:40 2012] Writing source region out to fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src8_src.reg [Thu May 3 13:10:40 2012] Extracting stamp from image fullrun_pn_xmm0506490101_pi300-10000_cl_sm2.00.img.gz, (185, 402) - (379, 595) [Thu May 3 13:10:40 2012] XMMSAS bgd. selection expression = annulus(24490.562000, 43340.856000, 2804.750081, 5609.500161, X, Y) && !ellipse(23057.218000, 44610.538000, 4362.736126, 4362.736126, 0.000000, X, Y) && !ellipse(24294.210000, 43927.594000, 2181.368063, 2181.368063, 0.000000, X, Y) && !ellipse(23589.302826, 44151.586090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22780.697723, 43449.304291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24021.600006, 43282.289673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22790.032806, 42855.392822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23211.014252, 42071.229919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.618000, 42419.042000, 4487.600129, 4487.600129, 0.000000, X, Y) && !ellipse(23649.298000, 42247.768000, 2132.336061, 2132.336061, 0.000000, X, Y) && !ellipse(24005.529114, 41891.083527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18590.088425, 39990.990570, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(24785.935150, 43973.619476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26165.581299, 43880.555389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22337.082153, 43534.169647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25246.826996, 43288.693604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25774.729126, 42478.933563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22671.180420, 42506.479492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24347.226074, 42397.527710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25460.562164, 41896.016571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24900.789062, 42067.794312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24507.085388, 41803.066650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26048.602000, 41602.628000, 2094.368060, 2094.368060, 0.000000, X, Y) && !ellipse(24830.080322, 41555.822357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24584.384000, 40875.254000, 1711.144049, 750.824022, 24.922000, X, Y) && !ellipse(24712.913340, 40719.510600, 2027.576058, 883.968025, 19.937400, X, Y) && !ellipse(23562.182000, 40510.220000, 2034.600059, 2034.600059, 0.000000, X, Y) && !ellipse(26549.325958, 39794.300690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25311.356000, 39509.438000, 1446.656042, 1446.656042, 0.000000, X, Y) && !ellipse(26062.483400, 39453.106000, 3316.568095, 3316.568095, 0.000000, X, Y) && !ellipse(27656.670000, 38561.748000, 1790.704052, 1790.704052, 0.000000, X, Y) && !ellipse(26271.894000, 39460.862000, 2516.616072, 2516.616072, 0.000000, X, Y) && !ellipse(26031.578000, 38945.481200, 1908.136055, 1908.136055, 0.000000, X, Y) && !ellipse(26483.627258, 38674.810242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28084.910000, 38453.398000, 1795.496052, 1795.496052, 0.000000, X, Y) && !ellipse(28416.386000, 37970.612000, 3548.128102, 3548.128102, 0.000000, X, Y) && !ellipse(27641.660767, 37975.560486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24022.117737, 44491.026276, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 3 13:10:40 2012] Writing fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src8.gif [Thu May 3 13:48:43 2012] Mean detx,y = (7322.72, -13786.41) [Thu May 3 13:48:52 2012] Setting backscal keywords in source and bgd. spectrum [Thu May 3 13:50:44 2012] Binned source spectrum to 10 counts/bin [Thu May 3 13:50:45 2012] Setting source spectrum file to fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src8_src_b10.pi.gz [Thu May 3 13:50:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src8_bgd.pi.gz [Thu May 3 21:37:02 2012] Updating aperture counts using extracted products [Thu May 3 21:37:02 2012] Error reading totcts from fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src8_src_b10.pi.gz [Thu May 3 21:37:06 2012] Calculating source flux in energy range 0.30-8.00 [Thu May 3 21:37:06 2012] Using photon index=1.80, rate=0.0199, arf fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src8.arf [Thu May 3 21:37:06 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 3 21:37:06 2012] Updating source flux to 1.6e-13 [Thu May 3 21:42:48 2012] Flag b found in src. 8 procflags, skipping spectral fitting [Thu May 3 21:42:48 2012] Flag c found in src. 8 procflags, skipping spectral fitting