[Wed May  2 12:05:35 2012] Detection parameters:
  Position = (259.5, 515.1) = 8 41 3.81 -44 49 35.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 252.2 +/- 33.3
  Background counts = 194.4
  Rate = 0.006 +/- 0.0008

[Wed May  2 12:05:42 2012] Off-axis axis estimate = 15.96'
[Wed May  2 12:13:08 2012] Using EEF radius (= 14.41 ")to estimate initial spatial extent for simple fitting
[Wed May  2 12:13:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  2 12:13:08 2012] Initial guess for spatial extent in simple fitting = 14.41"
[Wed May  2 12:13:08 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.963
[Wed May  2 12:13:08 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 14.41"
[Wed May  2 19:03:24 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src4.ximg exists
[Wed May  2 19:03:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src4.csv
[Wed May  2 19:03:24 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed May  2 19:03:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src4.csv
[Wed May  2 19:03:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 19:03:26 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed May  2 19:03:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May  2 19:03:26 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed May  2 19:03:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May  2 19:03:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 23:35:57 2012] Warning, spatial fit 4 centroid is now closest to src. 6
[Wed May  2 23:35:57 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.019313 pixels away
[Wed May  2 23:35:57 2012] Spatial fit model total counts = 5805.230000, observed total counts = 5621.000000
[Wed May  2 23:35:57 2012] Offset between fit and detection position for source 4 = 8.416937 pixels
[Wed May  2 23:35:57 2012] Warning, changing simple spatial fit ID from 4 to 63
[Wed May  2 23:35:57 2012] 5535.750000 total counts/ 4504.860000 bgd. counts: snr = 15.359309
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 8.416937 pixels
  Position = (267.6, 517.4) = 8 41 0.51 -44 49 23.2
  Extent = 28.4 (22.9-56.8)" x 18.2 (13.8-23.3)", rotation angle = 23 (3-48) degrees
  Source counts = 1030.9 +/- 74.4
  Background counts = 4504.9
  Rate = 0.03 +/- 0.002
[Wed May  2 23:35:57 2012] Vigneting correction estimate = 1.000000
[Wed May  2 23:35:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 23:35:57 2012] Assessing source extent using major axis lower bound
[Wed May  2 23:35:57 2012] Source does appear to be extended
[Wed May  2 23:35:57 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Wed May  2 23:35:57 2012] Source is confused with source 5
[Wed May  2 23:35:57 2012] Source is confused with source 6
[Wed May  2 23:35:57 2012] Source is confused with source 7
[Wed May  2 23:35:57 2012] Source is confused with source 24
[Wed May  2 23:35:57 2012] Source is confused with source 64
[Wed May  2 23:36:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  2 23:36:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  2 23:36:30 2012] Initial guess for spatial extent in simple fitting = 23.30"
[Wed May  2 23:36:30 2012] source mask rpix=5.4, npix_max = 137, mask sum = 121, frac = 0.882
[Wed May  2 23:36:30 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 23.30"
[Thu May  3 10:32:13 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src3.ximg exists
[Thu May  3 10:32:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src3.csv
[Thu May  3 10:32:13 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May  3 10:32:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src3.csv
[Thu May  3 10:32:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 10:32:14 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May  3 10:32:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May  3 10:32:14 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May  3 10:32:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May  3 10:32:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 13:10:03 2012] Spatial fit model total counts = 9867.460000, observed total counts = 8786.000000
[Thu May  3 13:10:03 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  3 13:10:03 2012] Spatial fit model total counts = 20761.100000, observed total counts = 19185.000000
[Thu May  3 13:10:03 2012] Offset between fit and detection position for source 4 = 4.562730 pixels
[Thu May  3 13:10:03 2012] Warning, changing simple spatial fit ID from 3 to 4
[Thu May  3 13:10:03 2012] 19873.790000 total counts/ 14802.400000 bgd. counts: snr = 41.683189
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 4.562730 pixels
  Position = (265.6, 513.3) = 8 41 1.33 -44 49 41.0
  Extent = 54.5 (54.5-109.1)", rotation angle = 0
  Source counts = 5071.4 +/- 141.0
  Background counts = 14802.4
  Rate = 0.1 +/- 0.003
[Thu May  3 13:10:04 2012] Vigneting correction estimate = 1.000000
[Thu May  3 13:10:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 13:10:04 2012] Assessing source extent using major axis lower bound
[Thu May  3 13:10:04 2012] Source does appear to be extended
[Thu May  3 13:10:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 13:10:40 2012] Counts = 5071.390000, rescaling region sizes by 2.000000
[Thu May  3 13:10:40 2012] XMMSAS src. selection expression = ellipse(23057.218000, 44610.538000, 6544.104188, 6544.104188, 0.000000, X, Y)
[Thu May  3 13:10:40 2012] Writing source region out to fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src4_src.reg
[Thu May  3 13:10:40 2012] Extracting stamp from image fullrun_pn_xmm0506490101_pi300-10000_cl_sm2.00.img.gz, (0, 137) - (595, 595)
[Thu May  3 13:10:40 2012] XMMSAS bgd. selection expression = annulus(23057.218000, 44610.538000, 21813.680628, 43627.361255, X, Y) && !ellipse(25915.123800, 27997.981200, 429.460812, 429.460812, 0.000000, X, Y) && !ellipse(14143.907333, 32595.117065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24294.210000, 43927.594000, 2181.368063, 2181.368063, 0.000000, X, Y) && !ellipse(23589.302826, 44151.586090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22780.697723, 43449.304291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24490.562000, 43340.856000, 2243.800065, 2243.800065, 0.000000, X, Y) && !ellipse(24021.600006, 43282.289673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22790.032806, 42855.392822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23211.014252, 42071.229919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.618000, 42419.042000, 4487.600129, 4487.600129, 0.000000, X, Y) && !ellipse(23649.298000, 42247.768000, 2132.336061, 2132.336061, 0.000000, X, Y) && !ellipse(24005.529114, 41891.083527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15744.501038, 32728.452637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29903.997955, 29208.146637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13525.116913, 21003.742371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30050.790200, 21260.978200, 437.304728, 437.304728, 0.000000, X, Y) && !ellipse(18590.088425, 39990.990570, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(24785.935150, 43973.619476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26165.581299, 43880.555389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22337.082153, 43534.169647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25246.826996, 43288.693604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25774.729126, 42478.933563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22671.180420, 42506.479492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24347.226074, 42397.527710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25460.562164, 41896.016571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24900.789062, 42067.794312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24507.085388, 41803.066650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26048.602000, 41602.628000, 2094.368060, 2094.368060, 0.000000, X, Y) && !ellipse(24830.080322, 41555.822357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24584.384000, 40875.254000, 1711.144049, 750.824022, 24.922000, X, Y) && !ellipse(24712.913340, 40719.510600, 2027.576058, 883.968025, 19.937400, X, Y) && !ellipse(23562.182000, 40510.220000, 2034.600059, 2034.600059, 0.000000, X, Y) && !ellipse(26549.325958, 39794.300690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25311.356000, 39509.438000, 1446.656042, 1446.656042, 0.000000, X, Y) && !ellipse(26062.483400, 39453.106000, 3316.568095, 3316.568095, 0.000000, X, Y) && !ellipse(20297.928055, 19829.892853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27656.670000, 38561.748000, 1790.704052, 1790.704052, 0.000000, X, Y) && !ellipse(26271.894000, 39460.862000, 2516.616072, 2516.616072, 0.000000, X, Y) && !ellipse(26031.578000, 38945.481200, 1908.136055, 1908.136055, 0.000000, X, Y) && !ellipse(26483.627258, 38674.810242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28084.910000, 38453.398000, 1795.496052, 1795.496052, 0.000000, X, Y) && !ellipse(28416.386000, 37970.612000, 3548.128102, 3548.128102, 0.000000, X, Y) && !ellipse(27641.660767, 37975.560486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37216.585846, 34778.480408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20861.876190, 32226.620239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38082.361694, 31283.686584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24180.928314, 20484.126587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32746.891815, 27883.895020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38093.688049, 27878.821259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34238.653634, 26597.436406, 356.552239, 352.634896, 355.875983, X, Y) && !ellipse(30390.222500, 25545.477600, 430.980012, 430.980012, 0.000000, X, Y) && !ellipse(24022.117737, 44491.026276, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  3 13:10:40 2012] Writing fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src4.gif
[Thu May  3 13:18:33 2012] Mean detx,y = (6807.26, -12860.69) 
[Thu May  3 13:18:53 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May  3 13:42:33 2012] Binned source spectrum to 10 counts/bin
[Thu May  3 13:42:33 2012] Setting source spectrum file to fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May  3 13:42:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu May  3 21:37:02 2012] Updating aperture counts using extracted products
[Thu May  3 21:37:02 2012] Error reading totcts from fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May  3 21:37:06 2012] Calculating source flux in energy range 0.30-8.00
[Thu May  3 21:37:06 2012] Using photon index=1.80, rate=0.126, arf fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src4.arf
[Thu May  3 21:37:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  3 21:37:06 2012] Updating source flux to 1.1e-12
[Thu May  3 21:42:48 2012] Flag p found in src. 4 procflags, skipping spectral fitting
[Thu May  3 21:42:48 2012] Flag c found in src. 4 procflags, skipping spectral fitting