[Wed May  2 12:05:38 2012] Detection parameters:
  Position = (296.8, 488.8) = 8 40 48.56 -44 51 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.7 +/- 28.3
  Background counts = 279.0
  Rate = 0.004 +/- 0.0007

[Wed May  2 12:05:42 2012] Off-axis axis estimate = 13.80'
[Wed May  2 12:13:08 2012] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting
[Wed May  2 12:13:08 2012] Initial guess for spatial extent in simple fitting = 13.33"
[Wed May  2 12:13:08 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.964
[Wed May  2 12:13:08 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 13.33"
[Wed May  2 19:03:25 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src26.ximg exists
[Wed May  2 19:03:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src26.csv
[Wed May  2 19:03:25 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src26_1.ximg exists
[Wed May  2 19:03:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src26.csv
[Wed May  2 19:03:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 19:03:26 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Wed May  2 19:03:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Wed May  2 19:03:26 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Wed May  2 19:03:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Wed May  2 19:03:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 23:35:57 2012] Warning, spatial fit 26 centroid is now closest to src. 26
[Wed May  2 23:35:57 2012] Source 27 is offset by 3.782680 and -1.817269 pixels which is larger than
2 X fitted extent = 1.489775 x 1.489775, not incorporating fit results
[Wed May  2 23:35:57 2012] Vigneting correction estimate = 1.000000
[Wed May  2 23:35:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 23:35:57 2012] Assessing source extent using major
[Wed May  2 23:35:57 2012] Source does appear to be extended
[Wed May  2 23:35:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 23:35:57 2012] Source is confused with source 8
[Wed May  2 23:36:30 2012] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting
[Wed May  2 23:36:30 2012] Initial guess for spatial extent in simple fitting = 13.33"
[Wed May  2 23:36:30 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.964
[Wed May  2 23:36:30 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 13.33"
[Thu May  3 10:32:13 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src24.ximg exists
[Thu May  3 10:32:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src24.csv
[Thu May  3 10:32:13 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src24_1.ximg exists
[Thu May  3 10:32:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src24.csv
[Thu May  3 10:32:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 10:32:17 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Thu May  3 10:32:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Thu May  3 10:32:17 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Thu May  3 10:32:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Thu May  3 10:32:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 13:10:04 2012] Warning, spatial fit 24 centroid is now closest to src. 34
[Thu May  3 13:10:04 2012] Source 27 is offset by -1.099481 and -2.097131 pixels which is larger than
2 X fitted extent = 1.489775 x 1.489775, not incorporating fit results
[Thu May  3 13:10:04 2012] Vigneting correction estimate = 1.000000
[Thu May  3 13:10:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 13:10:04 2012] Assessing source extent using major
[Thu May  3 13:10:04 2012] Source does appear to be extended
[Thu May  3 13:10:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 13:10:41 2012] XMMSAS src. selection expression = ellipse(25774.729126, 42478.933563, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  3 13:10:41 2012] Writing source region out to fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src27_src.reg
[Thu May  3 13:10:41 2012] Extracting stamp from image fullrun_pn_xmm0506490101_pi300-10000_cl_sm2.00.img.gz, (259, 451) - (334, 526)
[Thu May  3 13:10:42 2012] XMMSAS bgd. selection expression = annulus(25774.729126, 42478.933563, 1087.500000, 2175.000000, X, Y) && !ellipse(23057.218000, 44610.538000, 4362.736126, 4362.736126, 0.000000, X, Y) && !ellipse(24294.210000, 43927.594000, 2181.368063, 2181.368063, 0.000000, X, Y) && !ellipse(23589.302826, 44151.586090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22780.697723, 43449.304291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24490.562000, 43340.856000, 2243.800065, 2243.800065, 0.000000, X, Y) && !ellipse(24021.600006, 43282.289673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22790.032806, 42855.392822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23211.014252, 42071.229919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.618000, 42419.042000, 4487.600129, 4487.600129, 0.000000, X, Y) && !ellipse(23649.298000, 42247.768000, 2132.336061, 2132.336061, 0.000000, X, Y) && !ellipse(24005.529114, 41891.083527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24785.935150, 43973.619476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26165.581299, 43880.555389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25246.826996, 43288.693604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24347.226074, 42397.527710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25460.562164, 41896.016571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24900.789062, 42067.794312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24507.085388, 41803.066650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26048.602000, 41602.628000, 2094.368060, 2094.368060, 0.000000, X, Y) && !ellipse(24830.080322, 41555.822357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24584.384000, 40875.254000, 1711.144049, 750.824022, 24.922000, X, Y) && !ellipse(24712.913340, 40719.510600, 2027.576058, 883.968025, 19.937400, X, Y) && !ellipse(23562.182000, 40510.220000, 2034.600059, 2034.600059, 0.000000, X, Y) && !ellipse(26549.325958, 39794.300690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25311.356000, 39509.438000, 1446.656042, 1446.656042, 0.000000, X, Y) && !ellipse(26062.483400, 39453.106000, 3316.568095, 3316.568095, 0.000000, X, Y) && !ellipse(27656.670000, 38561.748000, 1790.704052, 1790.704052, 0.000000, X, Y) && !ellipse(26271.894000, 39460.862000, 2516.616072, 2516.616072, 0.000000, X, Y) && !ellipse(26031.578000, 38945.481200, 1908.136055, 1908.136055, 0.000000, X, Y) && !ellipse(28416.386000, 37970.612000, 3548.128102, 3548.128102, 0.000000, X, Y) && !ellipse(24022.117737, 44491.026276, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  3 13:10:42 2012] Writing fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src27.gif
[Thu May  3 14:40:56 2012] Mean detx,y = (7934.03, -12365.22) 
[Thu May  3 14:41:01 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May  3 14:41:48 2012] Binned source spectrum to 10 counts/bin
[Thu May  3 14:41:49 2012] Setting source spectrum file to fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu May  3 14:41:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Thu May  3 17:45:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May  3 17:45:56 2012] rmf not generated due to insufficient counts
[Thu May  3 21:37:03 2012] Updating aperture counts using extracted products
[Thu May  3 21:37:03 2012] Error reading totcts from fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu May  3 21:37:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu May  3 21:37:07 2012] Using photon index=1.80, rate=0.00369, arf fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src27.arf
[Thu May  3 21:37:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  3 21:37:07 2012] Getting flux using calc_pl_flux failed
[Thu May  3 21:42:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting