[Wed May 2 12:05:36 2012] Detection parameters: Position = (286.9, 489.0) = 8 40 52.60 -44 51 25.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 293.6 +/- 34.0 Background counts = 259.6 Rate = 0.007 +/- 0.0008 [Wed May 2 12:05:42 2012] Off-axis axis estimate = 13.84' [Wed May 2 12:13:08 2012] Using EEF radius (= 13.35 ")to estimate initial spatial extent for simple fitting [Wed May 2 12:13:08 2012] Initial guess for spatial extent in simple fitting = 13.35" [Wed May 2 12:13:08 2012] source mask rpix=3.1, npix_max = 50, mask sum = 64, frac = 1.256 [Wed May 2 12:13:08 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 13.35" [Wed May 2 19:03:24 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src13.ximg exists [Wed May 2 19:03:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src13.csv [Wed May 2 19:03:24 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src13_1.ximg exists [Wed May 2 19:03:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src13.csv [Wed May 2 19:03:24 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src13_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 2 19:03:26 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists [Wed May 2 19:03:26 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists [Wed May 2 19:03:26 2012] Fit fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly [Wed May 2 23:35:57 2012] Warning, spatial fit 13 centroid is now closest to src. 30 [Wed May 2 23:35:57 2012] Source 13 is offset by -3.862187 and 2.228420 pixels which is larger than 2 X fitted extent = 1.475214 x 1.475214, not incorporating fit results [Wed May 2 23:35:57 2012] Vigneting correction estimate = 1.000000 [Wed May 2 23:35:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 2 23:35:57 2012] Assessing source extent using major [Wed May 2 23:35:57 2012] Source does appear to be extended [Wed May 2 23:35:57 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 2 23:35:57 2012] Source is confused with source 8 [Wed May 2 23:36:30 2012] Using EEF radius (= 13.35 ")to estimate initial spatial extent for simple fitting [Wed May 2 23:36:30 2012] Initial guess for spatial extent in simple fitting = 13.35" [Wed May 2 23:36:30 2012] source mask rpix=3.1, npix_max = 50, mask sum = 64, frac = 1.256 [Wed May 2 23:36:30 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 13.35" [Thu May 3 10:32:13 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src12.ximg exists [Thu May 3 10:32:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src12.csv [Thu May 3 10:32:13 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src12_1.ximg exists [Thu May 3 10:32:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src12.csv [Thu May 3 10:32:13 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src12_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 3 10:32:16 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists [Thu May 3 10:32:16 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists [Thu May 3 10:32:16 2012] Fit fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly [Thu May 3 13:10:03 2012] Spatial fit model total counts = 23366.000000, observed total counts = 22205.000000 [Thu May 3 13:10:03 2012] Offset between fit and detection position for source 13 = 2.039973 pixels [Thu May 3 13:10:03 2012] Warning, changing simple spatial fit ID from 12 to 7 [Thu May 3 13:10:03 2012] 22882.380000 total counts/ 18508.500000 bgd. counts: snr = 32.150020 Spatial fit parameters: Offset between fit and detection position for source 13 = 2.039973 pixels Position = (288.8, 488.1) = 8 40 51.85 -44 51 30.6 Extent = 56.1 (56.1-112.2)", rotation angle = 0 Source counts = 4373.9 +/- 151.3 Background counts = 18508.5 Rate = 0.1 +/- 0.004 [Thu May 3 13:10:03 2012] Source 13 is offset by 0.213839 and 1.745080 pixels which is larger than 2 X fitted extent = 1.656648 x 1.656648, not incorporating fit results [Thu May 3 13:10:04 2012] Vigneting correction estimate = 1.000000 [Thu May 3 13:10:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 3 13:10:04 2012] Assessing source extent using major axis lower bound [Thu May 3 13:10:04 2012] Source does appear to be extended [Thu May 3 13:10:04 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 3 13:10:40 2012] Counts = 4373.880000, rescaling region sizes by 2.000000 [Thu May 3 13:10:40 2012] XMMSAS src. selection expression = ellipse(25074.618000, 42419.042000, 6731.400194, 6731.400194, 0.000000, X, Y) [Thu May 3 13:10:40 2012] Writing source region out to fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src13_src.reg [Thu May 3 13:10:40 2012] Extracting stamp from image fullrun_pn_xmm0506490101_pi300-10000_cl_sm2.00.img.gz, (0, 101) - (595, 595) [Thu May 3 13:10:41 2012] XMMSAS bgd. selection expression = annulus(25074.618000, 42419.042000, 22438.000646, 44876.001291, X, Y) && !ellipse(25915.123800, 27997.981200, 429.460812, 429.460812, 0.000000, X, Y) && !ellipse(14143.907333, 32595.117065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23057.218000, 44610.538000, 4362.736126, 4362.736126, 0.000000, X, Y) && !ellipse(24294.210000, 43927.594000, 2181.368063, 2181.368063, 0.000000, X, Y) && !ellipse(23589.302826, 44151.586090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22780.697723, 43449.304291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24490.562000, 43340.856000, 2243.800065, 2243.800065, 0.000000, X, Y) && !ellipse(24021.600006, 43282.289673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22790.032806, 42855.392822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23211.014252, 42071.229919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23649.298000, 42247.768000, 2132.336061, 2132.336061, 0.000000, X, Y) && !ellipse(24005.529114, 41891.083527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15744.501038, 32728.452637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29903.997955, 29208.146637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13525.116913, 21003.742371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30050.790200, 21260.978200, 437.304728, 437.304728, 0.000000, X, Y) && !ellipse(18590.088425, 39990.990570, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(24785.935150, 43973.619476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26165.581299, 43880.555389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22337.082153, 43534.169647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25246.826996, 43288.693604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25774.729126, 42478.933563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22671.180420, 42506.479492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24347.226074, 42397.527710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25460.562164, 41896.016571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24900.789062, 42067.794312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24507.085388, 41803.066650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26048.602000, 41602.628000, 2094.368060, 2094.368060, 0.000000, X, Y) && !ellipse(24830.080322, 41555.822357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24584.384000, 40875.254000, 1711.144049, 750.824022, 24.922000, X, Y) && !ellipse(24712.913340, 40719.510600, 2027.576058, 883.968025, 19.937400, X, Y) && !ellipse(23562.182000, 40510.220000, 2034.600059, 2034.600059, 0.000000, X, Y) && !ellipse(26549.325958, 39794.300690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25311.356000, 39509.438000, 1446.656042, 1446.656042, 0.000000, X, Y) && !ellipse(26062.483400, 39453.106000, 3316.568095, 3316.568095, 0.000000, X, Y) && !ellipse(20297.928055, 19829.892853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27656.670000, 38561.748000, 1790.704052, 1790.704052, 0.000000, X, Y) && !ellipse(26271.894000, 39460.862000, 2516.616072, 2516.616072, 0.000000, X, Y) && !ellipse(26031.578000, 38945.481200, 1908.136055, 1908.136055, 0.000000, X, Y) && !ellipse(26483.627258, 38674.810242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28084.910000, 38453.398000, 1795.496052, 1795.496052, 0.000000, X, Y) && !ellipse(28416.386000, 37970.612000, 3548.128102, 3548.128102, 0.000000, X, Y) && !ellipse(27641.660767, 37975.560486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37216.585846, 34778.480408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20861.876190, 32226.620239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38082.361694, 31283.686584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24180.928314, 20484.126587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32746.891815, 27883.895020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38093.688049, 27878.821259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34238.653634, 26597.436406, 356.552239, 352.634896, 355.875983, X, Y) && !ellipse(30390.222500, 25545.477600, 430.980012, 430.980012, 0.000000, X, Y) && !ellipse(24022.117737, 44491.026276, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 3 13:10:41 2012] Writing fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src13.gif [Thu May 3 13:56:33 2012] Mean detx,y = (7168.96, -11345.88) [Thu May 3 13:56:52 2012] Setting backscal keywords in source and bgd. spectrum [Thu May 3 14:20:14 2012] Binned source spectrum to 10 counts/bin [Thu May 3 14:20:14 2012] Setting source spectrum file to fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src13_src_b10.pi.gz [Thu May 3 14:20:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src13_bgd.pi.gz [Thu May 3 21:37:02 2012] Updating aperture counts using extracted products [Thu May 3 21:37:02 2012] Error reading totcts from fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src13_src_b10.pi.gz [Thu May 3 21:37:06 2012] Calculating source flux in energy range 0.30-8.00 [Thu May 3 21:37:06 2012] Using photon index=1.80, rate=0.108, arf fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src13.arf [Thu May 3 21:37:06 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 3 21:37:06 2012] Updating source flux to 7.8e-13 [Thu May 3 21:42:48 2012] Flag b found in src. 13 procflags, skipping spectral fitting [Thu May 3 21:42:48 2012] Flag c found in src. 13 procflags, skipping spectral fitting