[Wed May  2 12:05:35 2012] Detection parameters:
  Position = (298.5, 322.2) = 8 40 47.88 -45 3 30.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6959.7 +/- 101.7
  Background counts = 246.3
  Rate = 0.2 +/- 0.003

[Wed May  2 12:05:42 2012] Off-axis axis estimate = 1.73'
[Wed May  2 12:13:08 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed May  2 12:13:08 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed May  2 12:13:08 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Wed May  2 12:13:08 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed May  2 19:03:24 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src1.ximg exists
[Wed May  2 19:03:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src1.csv
[Wed May  2 19:03:24 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May  2 19:03:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src1.csv
[Wed May  2 19:03:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 19:03:25 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May  2 19:03:25 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May  2 19:03:25 2012] Fit fullrun_pn_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May  2 23:35:57 2012] Spatial fit model total counts = 8781.980000, observed total counts = 8553.000000
[Wed May  2 23:35:57 2012] Offset between fit and detection position for source 1 = 0.147154 pixels
[Wed May  2 23:35:57 2012] 8808.110000 total counts/ 4049.550000 bgd. counts: snr = 74.777711
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.147154 pixels
  Position = (298.4, 322.4) = 8 40 47.90 -45 3 31.7
  Extent = 5.4 (5.2-5.5)", rotation angle = 0
  Source counts = 4758.6 +/- 93.9
  Background counts = 4049.6
  Rate = 0.1 +/- 0.002
[Wed May  2 23:35:57 2012] Vigneting correction estimate = 1.000000
[Wed May  2 23:35:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 23:35:57 2012] Assessing source extent using major axis lower bound
[Wed May  2 23:35:57 2012] Source does appear to be extended
[Wed May  2 23:35:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 23:36:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  2 23:36:30 2012] Initial guess for spatial extent in simple fitting = 5.36"
[Wed May  2 23:36:30 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.749
[Wed May  2 23:36:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.36"
[Thu May  3 10:32:13 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src1.ximg exists
[Thu May  3 10:32:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src1.csv
[Thu May  3 10:32:13 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May  3 10:32:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src1.csv
[Thu May  3 10:32:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 10:32:14 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May  3 10:32:14 2012] fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May  3 10:32:14 2012] Fit fullrun_pn_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May  3 13:10:03 2012] Spatial fit model total counts = 8782.690000, observed total counts = 8553.000000
[Thu May  3 13:10:03 2012] Offset between fit and detection position for source 1 = 0.000909 pixels
[Thu May  3 13:10:03 2012] 8808.720000 total counts/ 4047.110000 bgd. counts: snr = 74.848193
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000909 pixels
  Position = (298.4, 322.4) = 8 40 47.90 -45 3 31.7
  Extent = 5.4 (5.2-5.5)", rotation angle = 0
  Source counts = 4761.6 +/- 93.9
  Background counts = 4047.1
  Rate = 0.1 +/- 0.002
[Thu May  3 13:10:04 2012] Vigneting correction estimate = 1.000000
[Thu May  3 13:10:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 13:10:04 2012] Assessing source extent using major axis lower bound
[Thu May  3 13:10:04 2012] Source does appear to be extended
[Thu May  3 13:10:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 13:10:40 2012] Counts = 4761.610000, rescaling region sizes by 2.000000
[Thu May  3 13:10:40 2012] XMMSAS src. selection expression = ellipse(25915.123800, 27997.981200, 644.191219, 644.191219, 0.000000, X, Y)
[Thu May  3 13:10:40 2012] Writing source region out to fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src1_src.reg
[Thu May  3 13:10:40 2012] Extracting stamp from image fullrun_pn_xmm0506490101_pi300-10000_cl_sm2.00.img.gz, (261, 285) - (335, 359)
[Thu May  3 13:10:40 2012] XMMSAS bgd. selection expression = annulus(25915.123800, 27997.981200, 2147.304062, 4294.608124, X, Y) && !ellipse(29903.997955, 29208.146637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20861.876190, 32226.620239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30390.222500, 25545.477600, 430.980012, 430.980012, 0.000000, X, Y)
[Thu May  3 13:10:40 2012] Writing fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src1.gif
[Thu May  3 13:11:52 2012] Mean detx,y = (94.77, -260.57) 
[Thu May  3 13:12:05 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May  3 13:14:33 2012] Binned source spectrum to 10 counts/bin
[Thu May  3 13:14:33 2012] Setting source spectrum file to fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May  3 13:14:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May  3 21:37:02 2012] Updating aperture counts using extracted products
[Thu May  3 21:37:02 2012] Error reading totcts from fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May  3 21:37:06 2012] Calculating source flux in energy range 0.30-8.00
[Thu May  3 21:37:06 2012] Using photon index=1.80, rate=0.118, arf fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src1.arf
[Thu May  3 21:37:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  3 21:37:06 2012] Updating source flux to 3.9e-13
[Thu May  3 21:51:16 2012] Reading fit data from xmm0506490101/analysis//spectral/fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src1_pl.csv
[Thu May  3 21:51:16 2012] Spectral fit parameter nH value = 1.2758e+21
[Thu May  3 21:51:16 2012] Spectral fit parameter PhoIndex value = 1.6106
[Thu May  3 21:51:16 2012] Failed to get F(0.3-8.0) from xmm0506490101/analysis//spectral/fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu May  3 21:51:16 2012] Calculating source flux in energy range 0.30-8.00
[Thu May  3 21:51:16 2012] Using Nh = 1.3e+21, photon index=1.61, rate=0.118, arf fullrun_pn_xmm0506490101_pi300-10000_pass1_cl_src1.arf
[Thu May  3 21:51:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  3 21:51:16 2012] Updating source flux to 5.1e-13