[Wed May  2 12:05:47 2012] Detection parameters:
  Position = (273.3, 511.5) = 8 40 58.16 -44 49 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.5 +/- 16.2
  Background counts = 64.9
  Rate = 0.002 +/- 0.0004

[Wed May  2 12:05:49 2012] Off-axis axis estimate = 15.55'
[Wed May  2 19:56:46 2012] Using EEF radius (= 14.20 ")to estimate initial spatial extent for simple fitting
[Wed May  2 19:56:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  2 19:56:46 2012] Initial guess for spatial extent in simple fitting = 14.20"
[Wed May  2 19:56:46 2012] source mask rpix=3.3, npix_max = 56, mask sum = 46, frac = 0.811
[Wed May  2 19:56:46 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 14.20"
[Wed May  2 23:35:33 2012] fullrun_mos2_xmm0506490101_pi300-10000_cl_pass0_src16.ximg exists
[Wed May  2 23:35:33 2012] fullrun_mos2_xmm0506490101_pi300-10000_cl_pass0_src16_1.ximg exists
[Wed May  2 23:35:33 2012] Fit fullrun_mos2_xmm0506490101_pi300-10000_cl_pass0_src16 appears to have run properly
[Wed May  2 23:35:33 2012] fullrun_mos2_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Wed May  2 23:35:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Wed May  2 23:35:33 2012] fullrun_mos2_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Wed May  2 23:35:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Wed May  2 23:35:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 23:36:11 2012] Warning, spatial fit 16 centroid is now closest to src. 9
[Wed May  2 23:36:11 2012] Vigneting correction estimate = 1.000000
[Wed May  2 23:36:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 23:36:11 2012] Assessing source extent using major
[Wed May  2 23:36:11 2012] Source does appear to be extended
[Wed May  2 23:36:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 23:36:11 2012] Source is confused with source 7
[Thu May  3 11:51:38 2012] Using EEF radius (= 14.20 ")to estimate initial spatial extent for simple fitting
[Thu May  3 11:51:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  3 11:51:38 2012] Initial guess for spatial extent in simple fitting = 14.20"
[Thu May  3 11:51:38 2012] source mask rpix=3.3, npix_max = 56, mask sum = 46, frac = 0.811
[Thu May  3 11:51:38 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 14.20"
[Thu May  3 13:09:32 2012] fullrun_mos2_xmm0506490101_pi300-10000_cl_pass1_src16.ximg exists
[Thu May  3 13:09:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506490101_pi300-10000_cl_pass1_src16.csv
[Thu May  3 13:09:32 2012] fullrun_mos2_xmm0506490101_pi300-10000_cl_pass1_src16_1.ximg exists
[Thu May  3 13:09:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506490101_pi300-10000_cl_pass1_src16.csv
[Thu May  3 13:09:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506490101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506490101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 13:09:32 2012] fullrun_mos2_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Thu May  3 13:09:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Thu May  3 13:09:32 2012] fullrun_mos2_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Thu May  3 13:09:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Thu May  3 13:09:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 13:10:19 2012] Source 8 is offset by -1.899083 and -1.964144 pixels which is larger than
2 X fitted extent = 10.856920 x 1.361278, not incorporating fit results
[Thu May  3 13:10:19 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 14.265651 pixels away
[Thu May  3 13:10:19 2012] Spatial fit model total counts = 1548.450000, observed total counts = 1423.000000
[Thu May  3 13:10:19 2012] Offset between fit and detection position for source 8 = 2.841492 pixels
[Thu May  3 13:10:19 2012] Warning, changing simple spatial fit ID from 16 to 21
[Thu May  3 13:10:19 2012] 1523.367000 total counts/ 1170.160000 bgd. counts: snr = 10.325395
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 2.841492 pixels
  Position = (271.2, 509.6) = 8 40 59.04 -44 49 57.1
  Extent = 28.0 (28.0-56.0)", rotation angle = 0
  Source counts = 353.2 +/- 39.0
  Background counts = 1170.2
  Rate = 0.008 +/- 0.0009
[Thu May  3 13:10:19 2012] Vigneting correction estimate = 1.000000
[Thu May  3 13:10:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 13:10:19 2012] Assessing source extent using major axis lower bound
[Thu May  3 13:10:19 2012] Source does appear to be extended
[Thu May  3 13:10:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 20:22:18 2012] XMMSAS src. selection expression = ellipse(23544.482000, 44289.286000, 1678.662048, 1678.662048, 0.000000, X, Y)
[Thu May  3 20:22:18 2012] Writing source region out to fullrun_mos2_xmm0506490101_pi300-10000_pass1_cl_src8_src.reg
[Thu May  3 20:22:18 2012] Extracting stamp from image fullrun_mos2_xmm0506490101_pi300-10000_cl_sm2.00.img.gz, (175, 413) - (368, 595)
[Thu May  3 20:22:18 2012] XMMSAS bgd. selection expression = annulus(23544.482000, 44289.286000, 2797.770081, 5595.540161, X, Y) && !ellipse(28026.701080, 38649.667114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23879.001038, 44007.351624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24704.672668, 44538.952209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23039.332092, 43830.813416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25266.293800, 41473.642800, 1847.912053, 273.088008, 353.569000, X, Y)
[Thu May  3 20:22:18 2012] Writing fullrun_mos2_xmm0506490101_pi300-10000_pass1_cl_src8.gif
[Thu May  3 20:32:41 2012] Mean detx,y = (-6728.15, 14508.23) 
[Thu May  3 20:32:44 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May  3 20:34:34 2012] Binned source spectrum to 10 counts/bin
[Thu May  3 20:34:34 2012] Setting source spectrum file to fullrun_mos2_xmm0506490101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu May  3 20:34:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506490101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu May  3 21:37:14 2012] Updating aperture counts using extracted products
[Thu May  3 21:37:14 2012] Error reading totcts from fullrun_mos2_xmm0506490101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu May  3 21:37:15 2012] Calculating source flux in energy range 0.30-8.00
[Thu May  3 21:37:15 2012] Using photon index=1.80, rate=0.00778, arf fullrun_mos2_xmm0506490101_pi300-10000_pass1_cl_src8.arf
[Thu May  3 21:37:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  3 21:37:15 2012] Updating source flux to 2.8e-13
[Thu May  3 21:40:07 2012] Flag b found in src. 8 procflags, skipping spectral fitting
[Thu May  3 21:40:07 2012] Flag c found in src. 8 procflags, skipping spectral fitting