[Wed May  2 12:05:47 2012] Detection parameters:
  Position = (356.8, 142.1) = 8 40 23.86 -45 16 36.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 822.9 +/- 35.8
  Background counts = 33.8
  Rate = 0.02 +/- 0.0008

[Wed May  2 12:05:49 2012] Off-axis axis estimate = 12.10'
[Wed May  2 19:56:46 2012] Using EEF radius (= 12.48 ")to estimate initial spatial extent for simple fitting
[Wed May  2 19:56:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  2 19:56:46 2012] Initial guess for spatial extent in simple fitting = 12.48"
[Wed May  2 19:56:46 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.925
[Wed May  2 19:56:46 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.48"
[Wed May  2 23:35:33 2012] fullrun_mos2_xmm0506490101_pi300-10000_cl_pass0_src2.ximg exists
[Wed May  2 23:35:33 2012] fullrun_mos2_xmm0506490101_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May  2 23:35:33 2012] Fit fullrun_mos2_xmm0506490101_pi300-10000_cl_pass0_src2 appears to have run properly
[Wed May  2 23:35:33 2012] fullrun_mos2_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May  2 23:35:33 2012] fullrun_mos2_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May  2 23:35:33 2012] Fit fullrun_mos2_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed May  2 23:36:11 2012] Spatial fit model total counts = 1219.140000, observed total counts = 1218.000000
[Wed May  2 23:36:11 2012] Offset between fit and detection position for source 6 = 0.120177 pixels
[Wed May  2 23:36:11 2012] 1223.990000 total counts/ 679.424000 bgd. counts: snr = 20.892003
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.120177 pixels
  Position = (356.7, 142.0) = 8 40 23.89 -45 16 36.1
  Extent = 8.6 (7.7-9.6)" x 3.8 (3.4-4.2)", rotation angle = 341 (336-345) degrees
  Source counts = 544.6 +/- 35.0
  Background counts = 679.4
  Rate = 0.01 +/- 0.0008
[Wed May  2 23:36:11 2012] Vigneting correction estimate = 1.000000
[Wed May  2 23:36:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 23:36:11 2012] Assessing source extent using major axis lower bound
[Wed May  2 23:36:11 2012] Source does appear to be extended
[Wed May  2 23:36:11 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.84
[Wed May  2 23:36:11 2012] Source is asymmetric
[Thu May  3 11:51:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  3 11:51:38 2012] Initial guess for spatial extent in simple fitting = 6.17"
[Thu May  3 11:51:38 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.086
[Thu May  3 11:51:38 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 6.17"
[Thu May  3 13:09:32 2012] fullrun_mos2_xmm0506490101_pi300-10000_cl_pass1_src2.ximg exists
[Thu May  3 13:09:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506490101_pi300-10000_cl_pass1_src2.csv
[Thu May  3 13:09:32 2012] fullrun_mos2_xmm0506490101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May  3 13:09:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506490101_pi300-10000_cl_pass1_src2.csv
[Thu May  3 13:09:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506490101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506490101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 13:09:32 2012] fullrun_mos2_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May  3 13:09:32 2012] fullrun_mos2_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May  3 13:09:32 2012] Fit fullrun_mos2_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu May  3 13:10:19 2012] Spatial fit model total counts = 1149.030000, observed total counts = 1148.000000
[Thu May  3 13:10:19 2012] Offset between fit and detection position for source 6 = 0.142731 pixels
[Thu May  3 13:10:19 2012] 1152.784000 total counts/ 636.270000 bgd. counts: snr = 20.476766
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.142731 pixels
  Position = (356.7, 142.2) = 8 40 23.88 -45 16 35.5
  Extent = 5.9 (5.3-6.5)", rotation angle = 0
  Source counts = 516.5 +/- 34.0
  Background counts = 636.3
  Rate = 0.01 +/- 0.0007
[Thu May  3 13:10:19 2012] Vigneting correction estimate = 1.000000
[Thu May  3 13:10:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 13:10:19 2012] Assessing source extent using major axis lower bound
[Thu May  3 13:10:19 2012] Source does appear to be extended
[Thu May  3 13:10:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 20:22:18 2012] XMMSAS src. selection expression = ellipse(30986.002000, 12318.964200, 354.664810, 354.664810, 0.000000, X, Y)
[Thu May  3 20:22:18 2012] Writing source region out to fullrun_mos2_xmm0506490101_pi300-10000_pass1_cl_src6_src.reg
[Thu May  3 20:22:18 2012] Extracting stamp from image fullrun_mos2_xmm0506490101_pi300-10000_cl_sm2.00.img.gz, (336, 122) - (377, 163)
[Thu May  3 20:22:18 2012] XMMSAS bgd. selection expression = annulus(30986.002000, 12318.964200, 591.108017, 1182.216034, X, Y)
[Thu May  3 20:22:18 2012] Writing fullrun_mos2_xmm0506490101_pi300-10000_pass1_cl_src6.gif
[Thu May  3 20:23:11 2012] Mean detx,y = (4409.98, -15770.93) 
[Thu May  3 20:23:16 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May  3 20:23:31 2012] Binned source spectrum to 10 counts/bin
[Thu May  3 20:23:31 2012] Setting source spectrum file to fullrun_mos2_xmm0506490101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu May  3 20:23:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506490101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu May  3 21:37:12 2012] Updating aperture counts using extracted products
[Thu May  3 21:37:13 2012] Error reading totcts from fullrun_mos2_xmm0506490101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu May  3 21:37:14 2012] Calculating source flux in energy range 0.30-8.00
[Thu May  3 21:37:14 2012] Using photon index=1.80, rate=0.0114, arf fullrun_mos2_xmm0506490101_pi300-10000_pass1_cl_src6.arf
[Thu May  3 21:37:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  3 21:37:15 2012] Updating source flux to 4.6e-13