[Wed May  2 12:05:45 2012] Detection parameters:
  Position = (349.8, 293.7) = 8 40 26.81 -45 5 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 167.7 +/- 19.6
  Background counts = 65.9
  Rate = 0.004 +/- 0.0005

[Wed May  2 12:05:45 2012] Off-axis axis estimate = 3.74'
[Wed May  2 19:03:27 2012] Using EEF radius (= 8.30 ")to estimate initial spatial extent for simple fitting
[Wed May  2 19:03:27 2012] Initial guess for spatial extent in simple fitting = 8.30"
[Wed May  2 19:03:27 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.078
[Wed May  2 19:03:27 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.30"
[Wed May  2 19:56:46 2012] fullrun_mos1_xmm0506490101_pi300-10000_cl_pass0_src5.ximg exists
[Wed May  2 19:56:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506490101_pi300-10000_cl_pass0_src5.csv
[Wed May  2 19:56:46 2012] fullrun_mos1_xmm0506490101_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed May  2 19:56:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506490101_pi300-10000_cl_pass0_src5.csv
[Wed May  2 19:56:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506490101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506490101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 19:56:46 2012] fullrun_mos1_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed May  2 19:56:46 2012] fullrun_mos1_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed May  2 19:56:46 2012] Fit fullrun_mos1_xmm0506490101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed May  2 23:36:04 2012] Spatial fit model total counts = 791.000000, observed total counts = 791.000000
[Wed May  2 23:36:04 2012] Offset between fit and detection position for source 17 = 0.140498 pixels
[Wed May  2 23:36:04 2012] 788.458000 total counts/ 684.381000 bgd. counts: snr = 3.978376
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.140498 pixels
  Position = (349.6, 293.8) = 8 40 26.86 -45 5 35.9
  Extent = 4.7 (3.5-5.8)", rotation angle = 0
  Source counts = 104.1 +/- 28.1
  Background counts = 684.4
  Rate = 0.002 +/- 0.0006
[Wed May  2 23:36:04 2012] Vigneting correction estimate = 1.000000
[Wed May  2 23:36:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 23:36:04 2012] Assessing source extent using major axis lower bound
[Wed May  2 23:36:04 2012] Source does appear to be extended
[Wed May  2 23:36:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 10:32:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  3 10:32:18 2012] Initial guess for spatial extent in simple fitting = 4.67"
[Thu May  3 10:32:18 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.909
[Thu May  3 10:32:18 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 4.67"
[Thu May  3 11:51:38 2012] fullrun_mos1_xmm0506490101_pi300-10000_cl_pass1_src5.ximg exists
[Thu May  3 11:51:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506490101_pi300-10000_cl_pass1_src5.csv
[Thu May  3 11:51:38 2012] fullrun_mos1_xmm0506490101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May  3 11:51:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506490101_pi300-10000_cl_pass1_src5.csv
[Thu May  3 11:51:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506490101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506490101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 11:51:38 2012] fullrun_mos1_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May  3 11:51:38 2012] fullrun_mos1_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May  3 11:51:38 2012] Fit fullrun_mos1_xmm0506490101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu May  3 13:10:11 2012] Spatial fit model total counts = 790.999000, observed total counts = 791.000000
[Thu May  3 13:10:11 2012] Offset between fit and detection position for source 17 = 0.004145 pixels
[Thu May  3 13:10:11 2012] 787.543000 total counts/ 684.286000 bgd. counts: snr = 3.947305
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.004145 pixels
  Position = (349.6, 293.8) = 8 40 26.86 -45 5 35.9
  Extent = 4.6 (3.5-5.7)", rotation angle = 0
  Source counts = 103.3 +/- 28.1
  Background counts = 684.3
  Rate = 0.002 +/- 0.0006
[Thu May  3 13:10:11 2012] Vigneting correction estimate = 1.000000
[Thu May  3 13:10:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 13:10:11 2012] Assessing source extent using major axis lower bound
[Thu May  3 13:10:11 2012] Source does appear to be extended
[Thu May  3 13:10:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 19:19:20 2012] XMMSAS src. selection expression = ellipse(30370.712400, 25511.849400, 278.350808, 278.350808, 0.000000, X, Y)
[Thu May  3 19:19:20 2012] Writing source region out to fullrun_mos1_xmm0506490101_pi300-10000_pass1_cl_src17_src.reg
[Thu May  3 19:19:20 2012] Extracting stamp from image fullrun_mos1_xmm0506490101_pi300-10000_cl_sm2.00.img.gz, (334, 278) - (366, 310)
[Thu May  3 19:19:20 2012] XMMSAS bgd. selection expression = annulus(30370.712400, 25511.849400, 463.918013, 927.836027, X, Y)
[Thu May  3 19:19:20 2012] Writing fullrun_mos1_xmm0506490101_pi300-10000_pass1_cl_src17.gif
[Thu May  3 19:21:43 2012] Mean detx,y = (-4207.31, 2119.10) 
[Thu May  3 19:21:46 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May  3 19:22:01 2012] Binned source spectrum to 10 counts/bin
[Thu May  3 19:22:01 2012] Setting source spectrum file to fullrun_mos1_xmm0506490101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu May  3 19:22:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0506490101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu May  3 21:37:10 2012] Updating aperture counts using extracted products
[Thu May  3 21:37:10 2012] Error reading totcts from fullrun_mos1_xmm0506490101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu May  3 21:37:11 2012] Calculating source flux in energy range 0.30-8.00
[Thu May  3 21:37:11 2012] Using photon index=1.80, rate=0.00227, arf fullrun_mos1_xmm0506490101_pi300-10000_pass1_cl_src17.arf
[Thu May  3 21:37:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  3 21:37:12 2012] Updating source flux to 4.3e-14