[Thu Jul 12 19:43:20 2012] Detection parameters:
  Position = (216.2, 127.7) = 10 35 12.17 39 24 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.3 +/- 16.8
  Background counts = 104.6
  Rate = 0.0009 +/- 0.0002

[Thu Jul 12 19:43:21 2012] Off-axis axis estimate = 13.74'
[Thu Jul 12 19:50:14 2012] Using EEF radius (= 13.30 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 19:50:14 2012] Initial guess for spatial extent in simple fitting = 13.30"
[Thu Jul 12 19:50:14 2012] source mask rpix=3.1, npix_max = 50, mask sum = 43, frac = 0.849
[Thu Jul 12 19:50:14 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 13.30"
[Thu Jul 12 23:07:30 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src61.ximg exists
[Thu Jul 12 23:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src61.csv
[Thu Jul 12 23:07:30 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src61_1.ximg exists
[Thu Jul 12 23:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src61.csv
[Thu Jul 12 23:07:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 23:07:32 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Thu Jul 12 23:07:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src61.csv
[Thu Jul 12 23:07:32 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Thu Jul 12 23:07:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src61.csv
[Thu Jul 12 23:07:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 01:18:49 2012] Warning: source 61 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 63 at 18.357149 pixels away
[Fri Jul 13 01:18:49 2012] Spatial fit model total counts = 1089.200000, observed total counts = 1088.000000
[Fri Jul 13 01:18:49 2012] Offset between fit and detection position for source 63 = 4.061584 pixels
[Fri Jul 13 01:18:49 2012] Warning, changing simple spatial fit ID from 61 to 74
[Fri Jul 13 01:18:49 2012] 1078.570026 total counts/ 1078.570000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 4.061584 pixels
  Position = (214.1, 124.1) = 10 35 12.93 39 24 18.5
  Extent = 25.8 (25.8-51.6)", rotation angle = 0
  Source counts = 0.0 +/- 32.8
  Background counts = 1078.6
  Rate = 3e-10 +/- 0.0004
  Deleting source due to low Poisson probability