[Thu Jul 12 19:43:20 2012] Detection parameters:
  Position = (183.2, 184.5) = 10 35 24.58 39 28 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 261.2 +/- 28.6
  Background counts = 160.1
  Rate = 0.003 +/- 0.0003

[Thu Jul 12 19:43:21 2012] Off-axis axis estimate = 11.75'
[Thu Jul 12 19:50:14 2012] Using EEF radius (= 12.30 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 19:50:14 2012] Initial guess for spatial extent in simple fitting = 12.30"
[Thu Jul 12 19:50:14 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.106
[Thu Jul 12 19:50:14 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 12.30"
[Thu Jul 12 23:07:30 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src49.ximg exists
[Thu Jul 12 23:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src49.csv
[Thu Jul 12 23:07:30 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src49_1.ximg exists
[Thu Jul 12 23:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src49.csv
[Thu Jul 12 23:07:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 23:07:32 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Thu Jul 12 23:07:32 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Thu Jul 12 23:07:32 2012] Fit fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Fri Jul 13 01:18:49 2012] Warning: source 49 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 15.190787 pixels away
[Fri Jul 13 01:18:49 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 01:18:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 01:18:49 2012] Assessing source extent using major
[Fri Jul 13 01:18:49 2012] Source does appear to be extended
[Fri Jul 13 01:18:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 01:19:19 2012] Using EEF radius (= 12.30 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 01:19:19 2012] Initial guess for spatial extent in simple fitting = 12.30"
[Fri Jul 13 01:19:19 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.106
[Fri Jul 13 01:19:19 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 12.30"
[Fri Jul 13 04:31:15 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src48.ximg exists
[Fri Jul 13 04:31:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src48.csv
[Fri Jul 13 04:31:15 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src48_1.ximg exists
[Fri Jul 13 04:31:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src48.csv
[Fri Jul 13 04:31:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 04:31:16 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Fri Jul 13 04:31:16 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Fri Jul 13 04:31:16 2012] Fit fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Fri Jul 13 06:12:31 2012] Spatial fit model total counts = 1703.380000, observed total counts = 1637.000000
[Fri Jul 13 06:12:31 2012] Offset between fit and detection position for source 50 = 4.691394 pixels
[Fri Jul 13 06:12:31 2012] 1692.680000 total counts/ 892.666000 bgd. counts: snr = 26.776456
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 4.691394 pixels
  Position = (182.6, 179.9) = 10 35 24.80 39 28 20.7
  Extent = 14.8 (12.5-18.9)", rotation angle = 0
  Source counts = 800.0 +/- 41.1
  Background counts = 892.7
  Rate = 0.01 +/- 0.0005
[Fri Jul 13 06:12:31 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 06:12:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 06:12:31 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 06:12:31 2012] Source does appear to be extended
[Fri Jul 13 06:12:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 06:12:31 2012] Source is confused with source 1
[Fri Jul 13 06:13:02 2012] XMMSAS src. selection expression = ellipse(15839.973200, 15601.708000, 889.824026, 889.824026, 0.000000, X, Y)
[Fri Jul 13 06:13:02 2012] Writing source region out to fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src50_src.reg
[Fri Jul 13 06:13:02 2012] Extracting stamp from image fullrun_pn_xmm0506440101_pi300-10000_cl_sm2.00.img.gz, (131, 129) - (234, 231)
[Fri Jul 13 06:13:02 2012] XMMSAS bgd. selection expression = annulus(15839.973200, 15601.708000, 1483.040043, 2966.080085, X, Y) && !ellipse(15982.183800, 15030.474000, 484.322414, 484.322414, 0.000000, X, Y) && !ellipse(17205.533127, 17085.134186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14509.368134, 13165.587448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18970.274017, 18424.244675, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 06:13:02 2012] Writing fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src50.gif
[Fri Jul 13 08:06:39 2012] Mean detx,y = (-13826.69, 8529.41) 
[Fri Jul 13 08:06:43 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 08:07:18 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 08:07:19 2012] Setting source spectrum file to fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Fri Jul 13 08:07:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Sat Jul 14 14:32:34 2012] Updating aperture counts using extracted products
[Sat Jul 14 14:32:34 2012] Error reading totcts from fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sat Jul 14 14:32:37 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 14:32:37 2012] Using photon index=1.80, rate=0.00959, arf fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src50.arf
[Sat Jul 14 14:32:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 14:32:37 2012] Updating source flux to 7e-14
[Sat Jul 14 14:37:50 2012] Flag c found in src. 50 procflags, skipping spectral fitting