[Thu Jul 12 19:43:19 2012] Detection parameters:
  Position = (346.6, 293.8) = 10 34 23.15 39 36 36.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2212.7 +/- 58.4
  Background counts = 207.8
  Rate = 0.03 +/- 0.0009

[Thu Jul 12 19:43:21 2012] Off-axis axis estimate = 3.51'
[Thu Jul 12 19:50:14 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 19:50:14 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Thu Jul 12 19:50:14 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.102
[Thu Jul 12 19:50:14 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.18"
[Thu Jul 12 23:07:29 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jul 12 23:07:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src3.csv
[Thu Jul 12 23:07:29 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jul 12 23:07:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src3.csv
[Thu Jul 12 23:07:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 23:07:31 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jul 12 23:07:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jul 12 23:07:31 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jul 12 23:07:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jul 12 23:07:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 01:18:48 2012] Spatial fit model total counts = 3232.120000, observed total counts = 2723.000000
[Fri Jul 13 01:18:48 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 13 01:18:49 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 01:18:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 01:18:49 2012] Assessing source extent using major
[Fri Jul 13 01:18:49 2012] Source does appear to be extended
[Fri Jul 13 01:18:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 01:19:19 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 01:19:19 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Fri Jul 13 01:19:19 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.102
[Fri Jul 13 01:19:19 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.18"
[Fri Jul 13 04:31:14 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jul 13 04:31:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src3.csv
[Fri Jul 13 04:31:14 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jul 13 04:31:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src3.csv
[Fri Jul 13 04:31:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 04:31:15 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul 13 04:31:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jul 13 04:31:15 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul 13 04:31:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jul 13 04:31:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 06:12:31 2012] Spatial fit model total counts = 3107.370000, observed total counts = 2723.000000
[Fri Jul 13 06:12:31 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 13 06:12:31 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 06:12:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 06:12:31 2012] Assessing source extent using major
[Fri Jul 13 06:12:31 2012] Source does appear to be extended
[Fri Jul 13 06:12:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 06:12:59 2012] Counts = 2212.712402, rescaling region sizes by 2.000000
[Fri Jul 13 06:12:59 2012] XMMSAS src. selection expression = ellipse(30107.726318, 25510.944000, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jul 13 06:12:59 2012] Writing source region out to fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src3_src.reg
[Fri Jul 13 06:12:59 2012] Extracting stamp from image fullrun_pn_xmm0506440101_pi300-10000_cl_sm2.00.img.gz, (272, 219) - (422, 369)
[Fri Jul 13 06:12:59 2012] XMMSAS bgd. selection expression = annulus(30107.726318, 25510.944000, 4350.000000, 8700.000000, X, Y) && !ellipse(26489.098980, 27738.320200, 1583.160046, 1583.160046, 0.000000, X, Y) && !ellipse(22441.868400, 20839.164800, 387.156811, 387.156811, 0.000000, X, Y) && !ellipse(34098.994690, 28940.957764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24627.345800, 32876.407000, 452.676013, 452.676013, 0.000000, X, Y) && !ellipse(27749.858521, 32484.258972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23439.200745, 31870.211761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32897.623138, 29954.709015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26392.713745, 29146.464996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22409.734375, 29184.673523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23651.749115, 27549.228577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27064.164000, 25628.572000, 2258.528065, 2258.528065, 0.000000, X, Y) && !ellipse(27454.073400, 24858.758000, 1129.768033, 1129.768033, 0.000000, X, Y) && !ellipse(27490.374300, 24592.683174, 1156.504033, 399.738180, 252.882480, X, Y) && !ellipse(27767.303400, 23690.055760, 1226.224035, 355.616010, 70.958800, X, Y) && !ellipse(36450.299255, 23206.362640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28093.960000, 22669.668000, 444.065613, 444.065613, 0.000000, X, Y) && !ellipse(28297.712600, 22016.569400, 1331.064038, 381.497611, 72.193500, X, Y) && !ellipse(28510.501800, 21840.580000, 1347.144039, 1347.144039, 0.000000, X, Y) && !ellipse(28428.865800, 21663.440000, 827.248024, 827.248024, 0.000000, X, Y) && !ellipse(28661.406927, 20808.800000, 1118.920032, 1118.920032, 0.000000, X, Y) && !ellipse(31674.135193, 20791.755539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38110.964325, 20485.561630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28644.785400, 20889.812520, 2237.840064, 434.103212, 71.244000, X, Y) && !ellipse(21792.968414, 20308.345062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34550.049652, 20240.337814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29068.797820, 19579.142440, 2184.000063, 400.108012, 71.523000, X, Y) && !ellipse(22944.446655, 18915.997253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29445.377200, 18524.442000, 1265.496036, 1265.496036, 0.000000, X, Y) && !ellipse(29514.676000, 18185.805200, 3057.504088, 1079.744031, 90.000000, X, Y) && !ellipse(29623.949600, 17958.864000, 1394.616040, 1394.616040, 0.000000, X, Y) && !ellipse(29932.539520, 16913.813110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30043.811798, 16481.125641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28421.211884, 16252.503723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30328.244540, 15598.198800, 1776.408051, 378.967211, 73.035000, X, Y) && !ellipse(32577.615112, 34770.454254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33273.729279, 33160.149780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34617.803345, 29850.159271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25906.514160, 28996.392120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33750.917694, 25712.378418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23548.768494, 25554.924561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26441.231750, 18560.387939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35383.513794, 32279.662415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32824.572662, 30346.896667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26948.018433, 29424.104065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25377.204865, 28823.666534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24043.084503, 28454.460815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28500.842320, 26009.217000, 594.837617, 594.837617, 0.000000, X, Y) && !ellipse(22059.894440, 25614.848572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35647.621600, 21922.895400, 432.758412, 432.758412, 0.000000, X, Y) && !ellipse(32031.512756, 17223.998856, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 06:12:59 2012] Writing fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src3.gif
[Fri Jul 13 06:20:24 2012] Mean detx,y = (2676.78, 3093.97) 
[Fri Jul 13 06:20:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 06:22:25 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 06:22:25 2012] Setting source spectrum file to fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul 13 06:22:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jul 13 09:28:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 13 09:28:18 2012] rmf not generated due to insufficient counts
[Sat Jul 14 14:32:31 2012] Updating aperture counts using extracted products
[Sat Jul 14 14:32:31 2012] Error reading totcts from fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 14 14:32:35 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 14:32:35 2012] Using photon index=1.80, rate=0.0331, arf fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src3.arf
[Sat Jul 14 14:32:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 14:32:35 2012] Updating source flux to 9.7e-14
[Sat Jul 14 14:37:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting