[Thu Jul 12 19:43:19 2012] Detection parameters:
  Position = (325.7, 254.0) = 10 34 31.03 39 33 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 707.3 +/- 41.3
  Background counts = 201.3
  Rate = 0.01 +/- 0.0006

[Thu Jul 12 19:43:21 2012] Off-axis axis estimate = 3.78'
[Thu Jul 12 19:50:14 2012] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 19:50:14 2012] Initial guess for spatial extent in simple fitting = 8.32"
[Thu Jul 12 19:50:14 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.859
[Thu Jul 12 19:50:14 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 8.32"
[Thu Jul 12 23:07:30 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src28.ximg exists
[Thu Jul 12 23:07:30 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu Jul 12 23:07:30 2012] Fit fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src28 appears to have run properly
[Thu Jul 12 23:07:31 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu Jul 12 23:07:31 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu Jul 12 23:07:31 2012] Fit fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Fri Jul 13 01:18:49 2012] Spatial fit model total counts = 3587.540000, observed total counts = 3584.000000
[Fri Jul 13 01:18:49 2012] Offset between fit and detection position for source 29 = 0.375007 pixels
[Fri Jul 13 01:18:49 2012] 3262.170000 total counts/ 2221.930000 bgd. counts: snr = 22.068274
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.375007 pixels
  Position = (325.8, 253.6) = 10 34 30.99 39 33 41.9
  Extent = 16.6 (16.5-33.3)" x 4.8 (4.3-5.3)", rotation angle = 72 (70-74) degrees
  Source counts = 1040.2 +/- 57.1
  Background counts = 2221.9
  Rate = 0.01 +/- 0.0007
[Fri Jul 13 01:18:49 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 01:18:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 01:18:49 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 01:18:49 2012] Source does appear to be extended
[Fri Jul 13 01:18:49 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.14
[Fri Jul 13 01:18:49 2012] Source is asymmetric
[Fri Jul 13 01:18:49 2012] Source is confused with source 28
[Fri Jul 13 01:19:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 01:19:19 2012] Initial guess for spatial extent in simple fitting = 10.70"
[Fri Jul 13 01:19:19 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.027
[Fri Jul 13 01:19:19 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 10.70"
[Fri Jul 13 04:31:14 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src27.ximg exists
[Fri Jul 13 04:31:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src27.csv
[Fri Jul 13 04:31:14 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Jul 13 04:31:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src27.csv
[Fri Jul 13 04:31:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 04:31:16 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Jul 13 04:31:16 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Jul 13 04:31:16 2012] Fit fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Jul 13 06:12:31 2012] Warning, spatial fit 27 centroid is now closest to src. 30
[Fri Jul 13 06:12:31 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 06:12:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 06:12:31 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 06:12:31 2012] Source does appear to be extended
[Fri Jul 13 06:12:31 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.14
[Fri Jul 13 06:12:31 2012] Source is asymmetric
[Fri Jul 13 06:13:00 2012] Counts = 1040.240000, rescaling region sizes by 2.000000
[Fri Jul 13 06:13:00 2012] XMMSAS src. selection expression = ellipse(28297.712600, 22016.569400, 1996.596057, 572.246416, 72.193500, X, Y)
[Fri Jul 13 06:13:00 2012] Writing source region out to fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src29_src.reg
[Fri Jul 13 06:13:00 2012] Extracting stamp from image fullrun_pn_xmm0506440101_pi300-10000_cl_sm2.00.img.gz, (211, 139) - (441, 368)
[Fri Jul 13 06:13:00 2012] XMMSAS bgd. selection expression = annulus(28297.712600, 22016.569400, 6655.320192, 13310.640383, X, Y) && !ellipse(15982.183800, 15030.474000, 484.322414, 484.322414, 0.000000, X, Y) && !ellipse(26489.098980, 27738.320200, 1583.160046, 1583.160046, 0.000000, X, Y) && !ellipse(30107.726318, 25510.944000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22441.868400, 20839.164800, 387.156811, 387.156811, 0.000000, X, Y) && !ellipse(34098.994690, 28940.957764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22358.638336, 35776.349274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20246.130800, 33805.742400, 531.804815, 318.302409, 308.210000, X, Y) && !ellipse(24627.345800, 32876.407000, 452.676013, 452.676013, 0.000000, X, Y) && !ellipse(18959.328659, 32601.170532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27749.858521, 32484.258972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23439.200745, 31870.211761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32897.623138, 29954.709015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26392.713745, 29146.464996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22409.734375, 29184.673523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23651.749115, 27549.228577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27064.164000, 25628.572000, 2258.528065, 2258.528065, 0.000000, X, Y) && !ellipse(27454.073400, 24858.758000, 1129.768033, 1129.768033, 0.000000, X, Y) && !ellipse(27490.374300, 24592.683174, 1156.504033, 399.738180, 252.882480, X, Y) && !ellipse(27767.303400, 23690.055760, 1226.224035, 355.616010, 70.958800, X, Y) && !ellipse(36450.299255, 23206.362640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22817.477844, 11489.779419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28093.960000, 22669.668000, 444.065613, 444.065613, 0.000000, X, Y) && !ellipse(28510.501800, 21840.580000, 1347.144039, 1347.144039, 0.000000, X, Y) && !ellipse(28428.865800, 21663.440000, 827.248024, 827.248024, 0.000000, X, Y) && !ellipse(15426.477646, 20922.872833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28661.406927, 20808.800000, 1118.920032, 1118.920032, 0.000000, X, Y) && !ellipse(31674.135193, 20791.755539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38110.964325, 20485.561630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28644.785400, 20889.812520, 2237.840064, 434.103212, 71.244000, X, Y) && !ellipse(21792.968414, 20308.345062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34550.049652, 20240.337814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29068.797820, 19579.142440, 2184.000063, 400.108012, 71.523000, X, Y) && !ellipse(17358.517242, 19780.320801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22944.446655, 18915.997253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29445.377200, 18524.442000, 1265.496036, 1265.496036, 0.000000, X, Y) && !ellipse(29514.676000, 18185.805200, 3057.504088, 1079.744031, 90.000000, X, Y) && !ellipse(29623.949600, 17958.864000, 1394.616040, 1394.616040, 0.000000, X, Y) && !ellipse(17205.533127, 17085.134186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29932.539520, 16913.813110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30043.811798, 16481.125641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28421.211884, 16252.503723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15839.973200, 15601.708000, 1186.432034, 1186.432034, 0.000000, X, Y) && !ellipse(35394.877319, 15472.217163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30328.244540, 15598.198800, 1776.408051, 378.967211, 73.035000, X, Y) && !ellipse(30445.277600, 15231.376000, 1324.720038, 1324.720038, 0.000000, X, Y) && !ellipse(30785.297760, 14224.835281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14509.368134, 13165.587448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22881.028625, 35624.882507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19840.105423, 10905.373619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32577.615112, 34770.454254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15758.876694, 34551.905518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33273.729279, 33160.149780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15246.279200, 32979.875600, 508.397615, 508.397615, 0.000000, X, Y) && !ellipse(18094.718369, 31096.395508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34617.803345, 29850.159271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25906.514160, 28996.392120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14369.182587, 27261.072937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33750.917694, 25712.378418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23548.768494, 25554.924561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40446.582977, 24588.395660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19630.001007, 11731.097687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26441.231750, 18560.387939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25464.088043, 12437.315567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35167.545746, 35486.398834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35383.513794, 32279.662415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32824.572662, 30346.896667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26948.018433, 29424.104065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25377.204865, 28823.666534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24043.084503, 28454.460815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28500.842320, 26009.217000, 594.837617, 594.837617, 0.000000, X, Y) && !ellipse(22059.894440, 25614.848572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35647.621600, 21922.895400, 432.758412, 432.758412, 0.000000, X, Y) && !ellipse(18970.274017, 18424.244675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32031.512756, 17223.998856, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 06:13:00 2012] Writing fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src29.gif
[Fri Jul 13 07:06:52 2012] Mean detx,y = (58.21, 5950.62) 
[Fri Jul 13 07:07:03 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 07:10:53 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 07:10:53 2012] Setting source spectrum file to fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Jul 13 07:10:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Jul 14 14:32:33 2012] Updating aperture counts using extracted products
[Sat Jul 14 14:32:33 2012] Error reading totcts from fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Jul 14 14:32:36 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 14:32:36 2012] Using photon index=1.80, rate=0.0125, arf fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src29.arf
[Sat Jul 14 14:32:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 14:32:36 2012] Updating source flux to 3.9e-14
[Sat Jul 14 14:37:50 2012] Flag c found in src. 29 procflags, skipping spectral fitting