[Thu Jul 12 19:43:19 2012] Detection parameters:
  Position = (378.7, 344.9) = 10 34 11.05 39 40 18.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 679.7 +/- 37.3
  Background counts = 192.6
  Rate = 0.01 +/- 0.0006

[Thu Jul 12 19:43:21 2012] Off-axis axis estimate = 6.72'
[Thu Jul 12 19:50:14 2012] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 19:50:14 2012] Initial guess for spatial extent in simple fitting = 9.79"
[Thu Jul 12 19:50:14 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.991
[Thu Jul 12 19:50:14 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 9.79"
[Thu Jul 12 23:07:30 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src15.ximg exists
[Thu Jul 12 23:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src15.csv
[Thu Jul 12 23:07:30 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu Jul 12 23:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src15.csv
[Thu Jul 12 23:07:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 23:07:31 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu Jul 12 23:07:31 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Jul 12 23:07:31 2012] Fit fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Jul 13 01:18:49 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 10.748839 pixels away
[Fri Jul 13 01:18:49 2012] Spatial fit model total counts = 1869.720000, observed total counts = 1484.000000
[Fri Jul 13 01:18:49 2012] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 13 01:18:49 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 01:18:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 01:18:49 2012] Assessing source extent using major
[Fri Jul 13 01:18:49 2012] Source does appear to be extended
[Fri Jul 13 01:18:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 01:18:49 2012] Source is confused with source 86
[Fri Jul 13 01:19:19 2012] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 01:19:19 2012] Initial guess for spatial extent in simple fitting = 9.79"
[Fri Jul 13 01:19:19 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.991
[Fri Jul 13 01:19:19 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 9.79"
[Fri Jul 13 04:31:14 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src15.ximg exists
[Fri Jul 13 04:31:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src15.csv
[Fri Jul 13 04:31:14 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src15_1.ximg exists
[Fri Jul 13 04:31:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src15.csv
[Fri Jul 13 04:31:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 04:31:15 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Fri Jul 13 04:31:15 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Jul 13 04:31:15 2012] Fit fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Fri Jul 13 06:12:31 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 10.748871 pixels away
[Fri Jul 13 06:12:31 2012] Spatial fit model total counts = 1869.710000, observed total counts = 1484.000000
[Fri Jul 13 06:12:31 2012] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 13 06:12:31 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 06:12:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 06:12:31 2012] Assessing source extent using major
[Fri Jul 13 06:12:31 2012] Source does appear to be extended
[Fri Jul 13 06:12:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 06:13:00 2012] XMMSAS src. selection expression = ellipse(32897.623138, 29954.709015, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 13 06:13:00 2012] Writing source region out to fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src16_src.reg
[Fri Jul 13 06:13:00 2012] Extracting stamp from image fullrun_pn_xmm0506440101_pi300-10000_cl_sm2.00.img.gz, (341, 307) - (416, 382)
[Fri Jul 13 06:13:00 2012] XMMSAS bgd. selection expression = annulus(32897.623138, 29954.709015, 1087.500000, 2175.000000, X, Y) && !ellipse(34098.994690, 28940.957764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34617.803345, 29850.159271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35383.513794, 32279.662415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32824.572662, 30346.896667, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 06:13:00 2012] Writing fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src16.gif
[Fri Jul 13 06:37:29 2012] Mean detx,y = (6815.21, -302.99) 
[Fri Jul 13 06:37:35 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 06:37:57 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 06:37:58 2012] Setting source spectrum file to fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jul 13 06:37:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri Jul 13 09:41:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 13 09:41:25 2012] rmf not generated due to insufficient counts
[Sat Jul 14 14:32:32 2012] Updating aperture counts using extracted products
[Sat Jul 14 14:32:32 2012] Error reading totcts from fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Jul 14 14:32:36 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 14:32:36 2012] Using photon index=1.80, rate=0.0107, arf fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src16.arf
[Sat Jul 14 14:32:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 14:32:36 2012] Updating source flux to 3.4e-14
[Sat Jul 14 14:37:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting