[Thu Jul 12 19:43:19 2012] Detection parameters:
  Position = (270.0, 366.9) = 10 34 52.02 39 41 55.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1077.1 +/- 43.6
  Background counts = 187.9
  Rate = 0.02 +/- 0.0007

[Thu Jul 12 19:43:21 2012] Off-axis axis estimate = 5.37'
[Thu Jul 12 19:50:14 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 19:50:14 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Thu Jul 12 19:50:14 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.113
[Thu Jul 12 19:50:14 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 9.12"
[Thu Jul 12 23:07:30 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src13.ximg exists
[Thu Jul 12 23:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src13.csv
[Thu Jul 12 23:07:30 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Jul 12 23:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src13.csv
[Thu Jul 12 23:07:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 23:07:31 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Jul 12 23:07:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu Jul 12 23:07:31 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Jul 12 23:07:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu Jul 12 23:07:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 01:18:49 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 16.592752 pixels away
[Fri Jul 13 01:18:49 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 01:18:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 01:18:49 2012] Assessing source extent using major
[Fri Jul 13 01:18:49 2012] Source does appear to be extended
[Fri Jul 13 01:18:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 01:19:19 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 01:19:19 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Fri Jul 13 01:19:19 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.113
[Fri Jul 13 01:19:19 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 9.12"
[Fri Jul 13 04:31:14 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src13.ximg exists
[Fri Jul 13 04:31:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src13.csv
[Fri Jul 13 04:31:14 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Jul 13 04:31:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src13.csv
[Fri Jul 13 04:31:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 04:31:15 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Jul 13 04:31:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Jul 13 04:31:15 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jul 13 04:31:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Jul 13 04:31:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 06:12:31 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 16.628305 pixels away
[Fri Jul 13 06:12:31 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 06:12:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 06:12:31 2012] Assessing source extent using major
[Fri Jul 13 06:12:31 2012] Source does appear to be extended
[Fri Jul 13 06:12:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 06:13:00 2012] Counts = 1077.149780, rescaling region sizes by 2.000000
[Fri Jul 13 06:13:00 2012] XMMSAS src. selection expression = ellipse(23439.200745, 31870.211761, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jul 13 06:13:00 2012] Writing source region out to fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src14_src.reg
[Fri Jul 13 06:13:00 2012] Extracting stamp from image fullrun_pn_xmm0506440101_pi300-10000_cl_sm2.00.img.gz, (195, 292) - (345, 442)
[Fri Jul 13 06:13:00 2012] XMMSAS bgd. selection expression = annulus(23439.200745, 31870.211761, 4350.000000, 8700.000000, X, Y) && !ellipse(26489.098980, 27738.320200, 1583.160046, 1583.160046, 0.000000, X, Y) && !ellipse(30107.726318, 25510.944000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30567.035767, 37449.437225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22358.638336, 35776.349274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20246.130800, 33805.742400, 531.804815, 318.302409, 308.210000, X, Y) && !ellipse(24627.345800, 32876.407000, 452.676013, 452.676013, 0.000000, X, Y) && !ellipse(18959.328659, 32601.170532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27749.858521, 32484.258972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32897.623138, 29954.709015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26392.713745, 29146.464996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22409.734375, 29184.673523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23651.749115, 27549.228577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27064.164000, 25628.572000, 2258.528065, 2258.528065, 0.000000, X, Y) && !ellipse(27454.073400, 24858.758000, 1129.768033, 1129.768033, 0.000000, X, Y) && !ellipse(27490.374300, 24592.683174, 1156.504033, 399.738180, 252.882480, X, Y) && !ellipse(27767.303400, 23690.055760, 1226.224035, 355.616010, 70.958800, X, Y) && !ellipse(28297.712600, 22016.569400, 1331.064038, 381.497611, 72.193500, X, Y) && !ellipse(28510.501800, 21840.580000, 1347.144039, 1347.144039, 0.000000, X, Y) && !ellipse(24037.384155, 39181.142914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22881.028625, 35624.882507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32577.615112, 34770.454254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15758.876694, 34551.905518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15246.279200, 32979.875600, 508.397615, 508.397615, 0.000000, X, Y) && !ellipse(18094.718369, 31096.395508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25906.514160, 28996.392120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14369.182587, 27261.072937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23548.768494, 25554.924561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28989.807648, 40342.288116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17691.998215, 38127.032562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32824.572662, 30346.896667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26948.018433, 29424.104065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25377.204865, 28823.666534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24043.084503, 28454.460815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28500.842320, 26009.217000, 594.837617, 594.837617, 0.000000, X, Y) && !ellipse(22059.894440, 25614.848572, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 06:13:00 2012] Writing fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src14.gif
[Fri Jul 13 06:33:15 2012] Mean detx,y = (-1427.80, -4937.97) 
[Fri Jul 13 06:33:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 06:35:53 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 06:35:54 2012] Setting source spectrum file to fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Jul 13 06:35:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Fri Jul 13 09:40:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 13 09:40:33 2012] rmf not generated due to insufficient counts
[Sat Jul 14 14:32:32 2012] Updating aperture counts using extracted products
[Sat Jul 14 14:32:32 2012] Error reading totcts from fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Jul 14 14:32:36 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 14:32:36 2012] Using photon index=1.80, rate=0.018, arf fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src14.arf
[Sat Jul 14 14:32:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 14:32:36 2012] Updating source flux to 5.6e-14
[Sat Jul 14 14:37:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting