[Thu Jul 12 19:43:19 2012] Detection parameters:
  Position = (184.1, 173.2) = 10 35 24.25 39 27 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2679.1 +/- 65.5
  Background counts = 155.1
  Rate = 0.03 +/- 0.0007

[Thu Jul 12 19:43:21 2012] Off-axis axis estimate = 12.30'
[Thu Jul 12 19:50:14 2012] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 19:50:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 12 19:50:14 2012] Initial guess for spatial extent in simple fitting = 12.58"
[Thu Jul 12 19:50:14 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.913
[Thu Jul 12 19:50:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.58"
[Thu Jul 12 23:07:29 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul 12 23:07:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src1.csv
[Thu Jul 12 23:07:29 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul 12 23:07:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src1.csv
[Thu Jul 12 23:07:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 23:07:31 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul 12 23:07:31 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul 12 23:07:31 2012] Fit fullrun_pn_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 13 01:18:48 2012] Spatial fit model total counts = 4569.270000, observed total counts = 4313.000000
[Fri Jul 13 01:18:48 2012] Offset between fit and detection position for source 1 = 0.259780 pixels
[Fri Jul 13 01:18:48 2012] 4646.100000 total counts/ 3058.440000 bgd. counts: snr = 28.708303
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.259780 pixels
  Position = (184.3, 173.3) = 10 35 24.17 39 27 52.2
  Extent = 6.7 (6.3-7.1)", rotation angle = 0
  Source counts = 1587.7 +/- 68.2
  Background counts = 3058.4
  Rate = 0.02 +/- 0.0008
[Fri Jul 13 01:18:49 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 01:18:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 01:18:49 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 01:18:49 2012] Source does appear to be extended
[Fri Jul 13 01:18:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 01:19:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 01:19:19 2012] Initial guess for spatial extent in simple fitting = 6.68"
[Fri Jul 13 01:19:19 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.965
[Fri Jul 13 01:19:19 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.68"
[Fri Jul 13 04:31:14 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 13 04:31:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 04:31:14 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 13 04:31:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 04:31:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 04:31:15 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 13 04:31:15 2012] fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 13 04:31:15 2012] Fit fullrun_pn_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 13 06:12:31 2012] Spatial fit model total counts = 3285.730000, observed total counts = 3272.000000
[Fri Jul 13 06:12:31 2012] Offset between fit and detection position for source 1 = 0.029776 pixels
[Fri Jul 13 06:12:31 2012] 3348.740000 total counts/ 1914.470000 bgd. counts: snr = 32.779825
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.029776 pixels
  Position = (184.3, 173.3) = 10 35 24.18 39 27 52.2
  Extent = 6.1 (5.6-6.4)", rotation angle = 0
  Source counts = 1434.3 +/- 57.9
  Background counts = 1914.5
  Rate = 0.02 +/- 0.0007
[Fri Jul 13 06:12:31 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 06:12:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 06:12:31 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 06:12:31 2012] Source does appear to be extended
[Fri Jul 13 06:12:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 06:12:31 2012] Source is confused with source 50
[Fri Jul 13 06:12:59 2012] Counts = 1434.270000, rescaling region sizes by 2.000000
[Fri Jul 13 06:12:59 2012] XMMSAS src. selection expression = ellipse(15982.183800, 15030.474000, 726.483621, 726.483621, 0.000000, X, Y)
[Fri Jul 13 06:12:59 2012] Writing source region out to fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 13 06:12:59 2012] Extracting stamp from image fullrun_pn_xmm0506440101_pi300-10000_cl_sm2.00.img.gz, (143, 132) - (226, 215)
[Fri Jul 13 06:12:59 2012] XMMSAS bgd. selection expression = annulus(15982.183800, 15030.474000, 2421.612070, 4843.224139, X, Y) && !ellipse(17358.517242, 19780.320801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17205.533127, 17085.134186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15839.973200, 15601.708000, 1186.432034, 1186.432034, 0.000000, X, Y) && !ellipse(14509.368134, 13165.587448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19840.105423, 10905.373619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19630.001007, 11731.097687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18970.274017, 18424.244675, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 06:12:59 2012] Writing fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src1.gif
[Fri Jul 13 06:13:33 2012] Mean detx,y = (-13799.33, 8833.68) 
[Fri Jul 13 06:13:37 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 06:14:28 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 06:14:28 2012] Setting source spectrum file to fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 13 06:14:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul 14 14:32:30 2012] Updating aperture counts using extracted products
[Sat Jul 14 14:32:31 2012] Error reading totcts from fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 14 14:32:35 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 14:32:35 2012] Using photon index=1.80, rate=0.0172, arf fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src1.arf
[Sat Jul 14 14:32:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 14:32:35 2012] Updating source flux to 1.3e-13
[Sat Jul 14 14:37:50 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sat Jul 14 14:44:18 2012] Reading fit data from xmm0506440101/analysis//spectral/fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jul 14 14:44:18 2012] Spectral fit parameter nH value = 5.04389e+19
[Sat Jul 14 14:44:18 2012] Spectral fit parameter PhoIndex value = 2.66986
[Sat Jul 14 14:44:18 2012] Failed to get F(0.3-8.0) from xmm0506440101/analysis//spectral/fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jul 14 14:44:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 14:44:18 2012] Using Nh = 5e+19, photon index=2.67, rate=0.0172, arf fullrun_pn_xmm0506440101_pi300-10000_pass1_cl_src1.arf
[Sat Jul 14 14:44:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 14:44:18 2012] Updating source flux to 8.3e-14