[Thu Jul 12 19:44:24 2012] Detection parameters:
  Position = (272.3, 320.9) = 10 34 51.13 39 38 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 729.4 +/- 35.0
  Background counts = 59.4
  Rate = 0.009 +/- 0.0004

[Thu Jul 12 19:44:25 2012] Off-axis axis estimate = 2.50'
[Thu Jul 12 23:50:45 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 23:50:45 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Thu Jul 12 23:50:45 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.975
[Thu Jul 12 23:50:45 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.68"
[Fri Jul 13 01:18:28 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jul 13 01:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src3.csv
[Fri Jul 13 01:18:28 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jul 13 01:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src3.csv
[Fri Jul 13 01:18:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 01:18:29 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jul 13 01:18:29 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jul 13 01:18:29 2012] Fit fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jul 13 01:19:03 2012] Source 7 is offset by 7.368008 and 5.982327 pixels which is larger than
2 X fitted extent = 7.060414 x 7.060414, not incorporating fit results
[Fri Jul 13 01:19:03 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 01:19:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 01:19:03 2012] Assessing source extent using major
[Fri Jul 13 01:19:03 2012] Source does appear to be extended
[Fri Jul 13 01:19:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 05:05:35 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 05:05:35 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Fri Jul 13 05:05:35 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.975
[Fri Jul 13 05:05:35 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.68"
[Fri Jul 13 06:12:13 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jul 13 06:12:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506440101_pi300-10000_cl_pass1_src3.csv
[Fri Jul 13 06:12:13 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jul 13 06:12:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506440101_pi300-10000_cl_pass1_src3.csv
[Fri Jul 13 06:12:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506440101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506440101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 06:12:14 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul 13 06:12:14 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul 13 06:12:14 2012] Fit fullrun_mos2_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jul 13 06:12:43 2012] Spatial fit model total counts = 1332.000000, observed total counts = 1332.000000
[Fri Jul 13 06:12:43 2012] Offset between fit and detection position for source 7 = 0.102850 pixels
[Fri Jul 13 06:12:43 2012] 1327.933000 total counts/ 902.812000 bgd. counts: snr = 14.148614
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.102850 pixels
  Position = (272.2, 320.9) = 10 34 51.17 39 38 34.5
  Extent = 4.0 (3.7-4.4)", rotation angle = 0
  Source counts = 425.1 +/- 36.4
  Background counts = 902.8
  Rate = 0.005 +/- 0.0004
[Fri Jul 13 06:12:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 06:12:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 06:12:43 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 06:12:43 2012] Source does appear to be extended
[Fri Jul 13 06:12:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 13:00:03 2012] XMMSAS src. selection expression = ellipse(23634.164380, 27867.902800, 242.730007, 242.730007, 0.000000, X, Y)
[Sat Jul 14 13:00:03 2012] Writing source region out to fullrun_mos2_xmm0506440101_pi300-10000_pass1_cl_src7_src.reg
[Sat Jul 14 13:00:03 2012] Extracting stamp from image fullrun_mos2_xmm0506440101_pi300-10000_cl_sm2.00.img.gz, (258, 307) - (286, 335)
[Sat Jul 14 13:00:03 2012] XMMSAS bgd. selection expression = annulus(23634.164380, 27867.902800, 404.550012, 809.100023, X, Y) && !ellipse(22776.614000, 28889.466000, 1260.456036, 1260.456036, 0.000000, X, Y)
[Sat Jul 14 13:00:03 2012] Writing fullrun_mos2_xmm0506440101_pi300-10000_pass1_cl_src7.gif
[Sat Jul 14 13:04:28 2012] Mean detx,y = (2805.81, 907.31) 
[Sat Jul 14 13:04:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 13:04:38 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 13:04:38 2012] Setting source spectrum file to fullrun_mos2_xmm0506440101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Jul 14 13:04:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506440101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Jul 14 14:32:41 2012] Updating aperture counts using extracted products
[Sat Jul 14 14:32:41 2012] Error reading totcts from fullrun_mos2_xmm0506440101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Jul 14 14:32:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 14:32:44 2012] Using photon index=1.80, rate=0.00466, arf fullrun_mos2_xmm0506440101_pi300-10000_pass1_cl_src7.arf
[Sat Jul 14 14:32:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 14:32:44 2012] Updating source flux to 6.1e-14
[Sat Jul 14 14:34:40 2012] Flag b found in src. 7 procflags, skipping spectral fitting