[Thu Jul 12 19:44:25 2012] Detection parameters:
  Position = (318.9, 307.1) = 10 34 33.60 39 37 36.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.1 +/- 20.6
  Background counts = 60.1
  Rate = 0.002 +/- 0.0003

[Thu Jul 12 19:44:25 2012] Off-axis axis estimate = 1.61'
[Thu Jul 12 23:50:45 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 23:50:45 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Thu Jul 12 23:50:45 2012] source mask rpix=1.7, npix_max = 18, mask sum = 6, frac = 0.321
[Thu Jul 12 23:50:45 2012] Skipping simple spatial due to low active detector fraction
[Fri Jul 13 01:19:03 2012] Source 40 is offset by 9.364937 and -0.099093 pixels which is larger than
2 X fitted extent = 3.835301 x 3.835301, not incorporating fit results
[Fri Jul 13 01:19:03 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 01:19:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 01:19:03 2012] Assessing source extent using major
[Fri Jul 13 01:19:03 2012] Source does appear to be extended
[Fri Jul 13 01:19:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 01:19:03 2012] Source is confused with source 38
[Fri Jul 13 05:05:35 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 05:05:35 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Fri Jul 13 05:05:35 2012] source mask rpix=1.7, npix_max = 18, mask sum = 6, frac = 0.321
[Fri Jul 13 05:05:35 2012] Skipping simple spatial due to low active detector fraction
[Fri Jul 13 06:12:43 2012] Spatial fit model total counts = -143.145000, observed total counts = 2641.000000
[Fri Jul 13 06:12:43 2012] Poor agreement between spatial fit and data for source 40
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 13 06:12:43 2012] Spatial fit model total counts = -11136.000000, observed total counts = 1001.000000
[Fri Jul 13 06:12:43 2012] Poor agreement between spatial fit and data for source 40
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 13 06:12:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 06:12:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 06:12:43 2012] Assessing source extent using major
[Fri Jul 13 06:12:43 2012] Source does appear to be extended
[Fri Jul 13 06:12:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 13:00:04 2012] XMMSAS src. selection expression = ellipse(27692.297485, 26673.068909, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 14 13:00:04 2012] Writing source region out to fullrun_mos2_xmm0506440101_pi300-10000_pass1_cl_src40_src.reg
[Sat Jul 14 13:00:04 2012] Extracting stamp from image fullrun_mos2_xmm0506440101_pi300-10000_cl_sm2.00.img.gz, (281, 270) - (356, 345)
[Sat Jul 14 13:00:04 2012] XMMSAS bgd. selection expression = annulus(27692.297485, 26673.068909, 1087.500000, 2175.000000, X, Y) && !ellipse(26490.130180, 27726.724800, 1340.001639, 1340.001639, 0.000000, X, Y) && !ellipse(30115.044600, 25513.664000, 373.032011, 373.032011, 0.000000, X, Y) && !ellipse(27139.002655, 28674.796387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27574.738098, 27879.177032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27786.946625, 27289.837524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27358.600128, 28234.388092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28341.707031, 26226.808929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29142.420000, 26832.812000, 1222.016035, 1222.016035, 0.000000, X, Y) && !ellipse(27460.075348, 26044.809326, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 13:00:04 2012] Writing fullrun_mos2_xmm0506440101_pi300-10000_pass1_cl_src40.gif
[Sat Jul 14 13:17:33 2012] Mean detx,y = (-665.88, -1299.48) 
[Sat Jul 14 13:17:36 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 13:17:50 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 13:17:50 2012] Setting source spectrum file to fullrun_mos2_xmm0506440101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sat Jul 14 13:17:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506440101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Sat Jul 14 14:11:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 14:11:11 2012] rmf not generated due to insufficient counts
[Sat Jul 14 14:32:43 2012] Updating aperture counts using extracted products
[Sat Jul 14 14:32:43 2012] Error reading totcts from fullrun_mos2_xmm0506440101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sat Jul 14 14:32:45 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 14:32:45 2012] Using photon index=1.80, rate=0.00183, arf fullrun_mos2_xmm0506440101_pi300-10000_pass1_cl_src40.arf
[Sat Jul 14 14:32:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 14:32:45 2012] Updating source flux to 2.1e-14
[Sat Jul 14 14:34:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting