[Thu Jul 12 19:44:24 2012] Detection parameters:
  Position = (305.3, 319.1) = 10 34 38.72 39 38 27.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89396.7 +/- 358.5
  Background counts = 60.9
  Rate = 1 +/- 0.004

[Thu Jul 12 19:44:25 2012] Off-axis axis estimate = 1.58'
[Thu Jul 12 23:50:45 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 23:50:45 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Thu Jul 12 23:50:45 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.858
[Thu Jul 12 23:50:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.22"
[Fri Jul 13 01:18:28 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 13 01:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 01:18:28 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 13 01:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 01:18:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 01:18:29 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 13 01:18:29 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 13 01:18:29 2012] Fit fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 13 01:19:03 2012] Spatial fit model total counts = 80265.400000, observed total counts = 78640.000000
[Fri Jul 13 01:19:03 2012] Offset between fit and detection position for source 3 = 0.254040 pixels
[Fri Jul 13 01:19:03 2012] 80574.000000 total counts/ 19644.900000 bgd. counts: snr = 434.710221
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.254040 pixels
  Position = (305.0, 319.3) = 10 34 38.80 39 38 27.5
  Extent = 5.6 (5.6-5.6)", rotation angle = 0
  Source counts = 60929.1 +/- 283.9
  Background counts = 19644.9
  Rate = 0.7 +/- 0.003
[Fri Jul 13 01:19:03 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 01:19:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 01:19:03 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 01:19:03 2012] Source does appear to be extended
[Fri Jul 13 01:19:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 05:05:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 05:05:35 2012] Initial guess for spatial extent in simple fitting = 5.59"
[Fri Jul 13 05:05:35 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.255
[Fri Jul 13 05:05:35 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.59"
[Fri Jul 13 06:12:13 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 13 06:12:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506440101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 06:12:13 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 13 06:12:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506440101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 06:12:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506440101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506440101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 06:12:14 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 13 06:12:14 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 13 06:12:14 2012] Fit fullrun_mos2_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 13 06:12:43 2012] Spatial fit model total counts = 80376.900000, observed total counts = 78640.000000
[Fri Jul 13 06:12:43 2012] Offset between fit and detection position for source 3 = 0.000123 pixels
[Fri Jul 13 06:12:43 2012] 80692.300000 total counts/ 19734.900000 bgd. counts: snr = 433.919303
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000123 pixels
  Position = (305.0, 319.3) = 10 34 38.80 39 38 27.5
  Extent = 5.6 (5.6-5.6)", rotation angle = 0
  Source counts = 60957.4 +/- 284.1
  Background counts = 19734.9
  Rate = 0.7 +/- 0.003
[Fri Jul 13 06:12:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 06:12:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 06:12:43 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 06:12:43 2012] Source does appear to be extended
[Fri Jul 13 06:12:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 13:00:03 2012] Counts = 60957.400000, rescaling region sizes by 3.000000
[Sat Jul 14 13:00:03 2012] XMMSAS src. selection expression = ellipse(26490.130180, 27726.724800, 1005.001229, 1005.001229, 0.000000, X, Y)
[Sat Jul 14 13:00:03 2012] Writing source region out to fullrun_mos2_xmm0506440101_pi300-10000_pass1_cl_src3_src.reg
[Sat Jul 14 13:00:03 2012] Extracting stamp from image fullrun_mos2_xmm0506440101_pi300-10000_cl_sm2.00.img.gz, (247, 261) - (363, 377)
[Sat Jul 14 13:00:03 2012] XMMSAS bgd. selection expression = annulus(26490.130180, 27726.724800, 5025.006145, 10050.012289, X, Y) && !ellipse(30115.044600, 25513.664000, 373.032011, 373.032011, 0.000000, X, Y) && !ellipse(23634.164380, 27867.902800, 323.640009, 323.640009, 0.000000, X, Y) && !ellipse(22444.005493, 20836.111786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34577.831879, 20277.944977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36492.657593, 23195.686768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24646.054932, 32857.139252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28733.156586, 22042.052643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22969.085327, 18920.513458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23408.465800, 31797.893600, 620.203218, 620.203218, 0.000000, X, Y) && !ellipse(27139.002655, 28674.796387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22394.533780, 29181.725400, 331.864810, 331.864810, 0.000000, X, Y) && !ellipse(32947.752000, 29942.987400, 723.903847, 723.903847, 0.000000, X, Y) && !ellipse(31689.234760, 20797.437400, 520.568815, 316.387209, 323.986715, X, Y) && !ellipse(27574.738098, 27879.177032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30585.496185, 37438.097595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27786.946625, 27289.837524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27358.600128, 28234.388092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28568.252716, 20734.661789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27742.316000, 32476.653600, 488.423214, 314.809609, 203.642882, X, Y) && !ellipse(22638.904000, 35743.274800, 1724.744050, 1724.744050, 0.000000, X, Y) && !ellipse(27692.297485, 26673.068909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33282.007660, 33161.102936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22776.614000, 28889.466000, 1260.456036, 1260.456036, 0.000000, X, Y) && !ellipse(33765.061035, 25707.793182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21804.957199, 20275.512970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26503.600300, 18535.878600, 805.752023, 370.914411, 0.000000, X, Y) && !ellipse(34595.487823, 29791.477814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17918.626246, 28573.135604, 545.626101, 259.901895, 75.832105, X, Y) && !ellipse(23603.237000, 25527.068600, 677.220819, 371.480011, 46.512945, X, Y) && !ellipse(17252.582901, 17116.861786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21084.541550, 24930.849304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30379.874786, 20685.861023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18944.938400, 32649.526581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28341.707031, 26226.808929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29142.420000, 26832.812000, 1222.016035, 1222.016035, 0.000000, X, Y) && !ellipse(27460.075348, 26044.809326, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 13:00:03 2012] Writing fullrun_mos2_xmm0506440101_pi300-10000_pass1_cl_src3.gif
[Sat Jul 14 13:00:25 2012] Mean detx,y = (125.12, -65.84) 
[Sat Jul 14 13:00:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 13:03:56 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 13:03:56 2012] Setting source spectrum file to fullrun_mos2_xmm0506440101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 14 13:03:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506440101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jul 14 14:32:41 2012] Updating aperture counts using extracted products
[Sat Jul 14 14:32:41 2012] Error reading totcts from fullrun_mos2_xmm0506440101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 14 14:32:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 14:32:44 2012] Using photon index=1.80, rate=0.668, arf fullrun_mos2_xmm0506440101_pi300-10000_pass1_cl_src3.arf
[Sat Jul 14 14:32:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 14:32:44 2012] Updating source flux to 6.6e-12
[Sat Jul 14 14:37:50 2012] Reading fit data from xmm0506440101/analysis//spectral/fullrun_mos2_xmm0506440101_pi300-10000_pass1_cl_src3_pl.csv
[Sat Jul 14 14:37:50 2012] Spectral fit parameter nH value = 1.85698e+19
[Sat Jul 14 14:37:50 2012] Spectral fit parameter PhoIndex value = 3.51412
[Sat Jul 14 14:37:50 2012] Failed to get F(0.3-8.0) from xmm0506440101/analysis//spectral/fullrun_mos2_xmm0506440101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Jul 14 14:37:50 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 14:37:50 2012] Using Nh = 1.9e+19, photon index=3.51, rate=0.668, arf fullrun_mos2_xmm0506440101_pi300-10000_pass1_cl_src3.arf
[Sat Jul 14 14:37:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 14:37:50 2012] Updating source flux to 4.8e-12