[Thu Jul 12 19:44:24 2012] Detection parameters:
  Position = (150.0, 352.9) = 10 35 37.23 39 40 51.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.8 +/- 11.1
  Background counts = 34.7
  Rate = 0.0006 +/- 0.0001

[Thu Jul 12 19:44:25 2012] Off-axis axis estimate = 11.46'
[Thu Jul 12 23:50:45 2012] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 23:50:45 2012] Initial guess for spatial extent in simple fitting = 12.16"
[Thu Jul 12 23:50:45 2012] source mask rpix=2.8, npix_max = 43, mask sum = 26, frac = 0.599
[Thu Jul 12 23:50:45 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 12.16"
[Fri Jul 13 01:18:29 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src56.ximg exists
[Fri Jul 13 01:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src56.csv
[Fri Jul 13 01:18:29 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src56_1.ximg exists
[Fri Jul 13 01:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src56.csv
[Fri Jul 13 01:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 01:18:29 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Fri Jul 13 01:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src56.csv
[Fri Jul 13 01:18:29 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Fri Jul 13 01:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src56.csv
[Fri Jul 13 01:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 01:19:03 2012] Warning: source 56 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 15.949991 pixels away
[Fri Jul 13 01:19:03 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 01:19:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 01:19:03 2012] Assessing source extent using major
[Fri Jul 13 01:19:03 2012] Source does appear to be extended
[Fri Jul 13 01:19:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 01:19:03 2012] Deleting source due to low Poisson probability 0.9