[Thu Jul 12 19:44:24 2012] Detection parameters:
  Position = (208.3, 358.0) = 10 35 15.25 39 41 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.4 +/- 10.9
  Background counts = 38.2
  Rate = 0.0005 +/- 0.0001

[Thu Jul 12 19:44:25 2012] Off-axis axis estimate = 7.83'
[Thu Jul 12 23:50:45 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 23:50:45 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Thu Jul 12 23:50:45 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.087
[Thu Jul 12 23:50:45 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 10.34"
[Fri Jul 13 01:18:29 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src57.ximg exists
[Fri Jul 13 01:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src57.csv
[Fri Jul 13 01:18:29 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src57_1.ximg exists
[Fri Jul 13 01:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src57.csv
[Fri Jul 13 01:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 01:18:29 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Fri Jul 13 01:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src57.csv
[Fri Jul 13 01:18:29 2012] fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Fri Jul 13 01:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src57.csv
[Fri Jul 13 01:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 01:18:49 2012] Warning, spatial fit 20 centroid is now closest to src. 24
[Fri Jul 13 01:18:49 2012] Warning, spatial fit 23 centroid is now closest to src. 25
[Fri Jul 13 01:18:49 2012] Warning, spatial fit 24 centroid is now closest to src. 25
[Fri Jul 13 01:18:49 2012] Warning, spatial fit 43 centroid is now closest to src. 43
[Fri Jul 13 01:18:54 2012] Warning, spatial fit 21 centroid is now closest to src. 29
[Fri Jul 13 01:19:03 2012] Source 26 is offset by -0.044568 and -9.363065 pixels which is larger than
2 X fitted extent = 1.203094 x 1.203094, not incorporating fit results
[Fri Jul 13 01:19:03 2012] Source 26 is offset by -8.980729 and 1.373947 pixels which is larger than
2 X fitted extent = 1.663858 x 1.663858, not incorporating fit results
[Fri Jul 13 01:19:03 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 01:19:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 01:19:03 2012] Assessing source extent using major
[Fri Jul 13 01:19:03 2012] Source does appear to be extended
[Fri Jul 13 01:19:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 01:19:03 2012] Deleting source due to low Poisson probability 0.9