[Thu Jul 12 19:43:49 2012] Detection parameters:
  Position = (250.8, 233.7) = 10 34 59.21 39 32 15.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 148.4 +/- 15.9
  Background counts = 50.0
  Rate = 0.002 +/- 0.0002

[Thu Jul 12 19:43:49 2012] Off-axis axis estimate = 5.83'
[Thu Jul 12 23:07:33 2012] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 23:07:33 2012] Initial guess for spatial extent in simple fitting = 9.34"
[Thu Jul 12 23:07:33 2012] source mask rpix=2.1, npix_max = 28, mask sum = 22, frac = 0.785
[Thu Jul 12 23:07:33 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 9.34"
[Thu Jul 12 23:50:44 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src21.ximg exists
[Thu Jul 12 23:50:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src21.csv
[Thu Jul 12 23:50:44 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Jul 12 23:50:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src21.csv
[Thu Jul 12 23:50:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 23:50:45 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Jul 12 23:50:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Jul 12 23:50:45 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Jul 12 23:50:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Jul 12 23:50:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 01:18:53 2012] Spatial fit model total counts = 645.940000, observed total counts = 707.000000
[Fri Jul 13 01:18:53 2012] Offset between fit and detection position for source 31 = 0.390581 pixels
[Fri Jul 13 01:18:53 2012] Warning, changing simple spatial fit ID from 21 to 5
[Fri Jul 13 01:18:53 2012] 621.989590 total counts/ 621.750000 bgd. counts: snr = 0.009609
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.390581 pixels
  Position = (250.5, 233.5) = 10 34 59.32 39 32 14.2
  Extent = 2.0" x 2.0", rotation angle = 0
  Source counts = 0.2 +/- 24.9
  Background counts = 621.8
  Rate = 3e-06 +/- 0.0003
  Deleting source due to low Poisson probability