[Thu Jul 12 19:43:49 2012] Detection parameters:
  Position = (229.7, 497.6) = 10 35 7.27 39 51 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.5 +/- 15.0
  Background counts = 40.8
  Rate = 0.001 +/- 0.0002

[Thu Jul 12 19:43:49 2012] Off-axis axis estimate = 15.28'
[Thu Jul 12 23:07:33 2012] Using EEF radius (= 14.07 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 23:07:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 12 23:07:33 2012] Initial guess for spatial extent in simple fitting = 14.07"
[Thu Jul 12 23:07:33 2012] source mask rpix=3.2, npix_max = 55, mask sum = 45, frac = 0.807
[Thu Jul 12 23:07:33 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 14.07"
[Thu Jul 12 23:50:44 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src27.ximg exists
[Thu Jul 12 23:50:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src27.csv
[Thu Jul 12 23:50:44 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu Jul 12 23:50:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src27.csv
[Thu Jul 12 23:50:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 23:50:45 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu Jul 12 23:50:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Thu Jul 12 23:50:45 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu Jul 12 23:50:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Thu Jul 12 23:50:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 01:18:54 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 18.486608 pixels away
[Fri Jul 13 01:18:54 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 01:18:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 01:18:54 2012] Assessing source extent using major
[Fri Jul 13 01:18:54 2012] Source does appear to be extended
[Fri Jul 13 01:18:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 04:31:17 2012] Using EEF radius (= 14.07 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 04:31:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 13 04:31:17 2012] Initial guess for spatial extent in simple fitting = 14.07"
[Fri Jul 13 04:31:17 2012] source mask rpix=3.2, npix_max = 55, mask sum = 45, frac = 0.807
[Fri Jul 13 04:31:17 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 14.07"
[Fri Jul 13 05:05:35 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_src23.ximg exists
[Fri Jul 13 05:05:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_src23.csv
[Fri Jul 13 05:05:35 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri Jul 13 05:05:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_src23.csv
[Fri Jul 13 05:05:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 05:05:35 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri Jul 13 05:05:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri Jul 13 05:05:35 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Jul 13 05:05:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri Jul 13 05:05:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 06:12:36 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 18.342133 pixels away
[Fri Jul 13 06:12:36 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 06:12:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 06:12:36 2012] Assessing source extent using major
[Fri Jul 13 06:12:36 2012] Source does appear to be extended
[Fri Jul 13 06:12:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 11:46:25 2012] XMMSAS src. selection expression = ellipse(19932.594696, 43245.498932, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 14 11:46:25 2012] Writing source region out to fullrun_mos1_xmm0506440101_pi300-10000_pass1_cl_src2_src.reg
[Sat Jul 14 11:46:25 2012] Extracting stamp from image fullrun_mos1_xmm0506440101_pi300-10000_cl_sm2.00.img.gz, (192, 460) - (267, 535)
[Sat Jul 14 11:46:25 2012] XMMSAS bgd. selection expression = annulus(19932.594696, 43245.498932, 1087.500000, 2175.000000, X, Y)
[Sat Jul 14 11:46:25 2012] Writing fullrun_mos1_xmm0506440101_pi300-10000_pass1_cl_src2.gif
[Sat Jul 14 12:02:37 2012] Mean detx,y = (16793.53, -1908.87) 
[Sat Jul 14 12:02:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 12:03:08 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 12:03:08 2012] Setting source spectrum file to fullrun_mos1_xmm0506440101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 14 12:03:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0506440101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jul 14 12:53:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 12:53:56 2012] rmf not generated due to insufficient counts
[Sat Jul 14 14:32:39 2012] Updating aperture counts using extracted products
[Sat Jul 14 14:32:40 2012] Error reading totcts from fullrun_mos1_xmm0506440101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 14 14:32:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 14:32:41 2012] Using photon index=1.80, rate=0.00108, arf fullrun_mos1_xmm0506440101_pi300-10000_pass1_cl_src2.arf
[Sat Jul 14 14:32:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 14:32:41 2012] Updating source flux to 3.7e-14
[Sat Jul 14 14:32:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting