[Thu Jul 12 19:43:49 2012] Detection parameters:
  Position = (272.4, 321.0) = 10 34 51.11 39 38 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 721.1 +/- 34.9
  Background counts = 60.2
  Rate = 0.009 +/- 0.0004

[Thu Jul 12 19:43:49 2012] Off-axis axis estimate = 2.50'
[Thu Jul 12 23:07:33 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 23:07:33 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Thu Jul 12 23:07:33 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.974
[Thu Jul 12 23:07:33 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.68"
[Thu Jul 12 23:50:44 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jul 12 23:50:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src3.csv
[Thu Jul 12 23:50:44 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jul 12 23:50:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src3.csv
[Thu Jul 12 23:50:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 23:50:45 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jul 12 23:50:45 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jul 12 23:50:45 2012] Fit fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jul 13 01:18:53 2012] Spatial fit model total counts = 1300.070000, observed total counts = 1274.000000
[Fri Jul 13 01:18:53 2012] Offset between fit and detection position for source 17 = 0.071227 pixels
[Fri Jul 13 01:18:53 2012] 1315.166000 total counts/ 882.157000 bgd. counts: snr = 14.578874
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.071227 pixels
  Position = (272.3, 321.0) = 10 34 51.14 39 38 34.9
  Extent = 4.4 (4.0-4.8)", rotation angle = 0
  Source counts = 433.0 +/- 36.3
  Background counts = 882.2
  Rate = 0.005 +/- 0.0004
[Fri Jul 13 01:18:54 2012] Spatial fit model total counts = 1172.550000, observed total counts = 1152.000000
[Fri Jul 13 01:18:54 2012] Offset between fit and detection position for source 17 = 0.047276 pixels
[Fri Jul 13 01:18:54 2012] Warning, changing simple spatial fit ID from 3 to 19
[Fri Jul 13 01:18:54 2012] 1186.967000 total counts/ 781.849000 bgd. counts: snr = 14.488389
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.047276 pixels
  Position = (272.3, 321.0) = 10 34 51.15 39 38 35.0
  Extent = 4.1 (3.8-4.5)", rotation angle = 0
  Source counts = 405.1 +/- 34.5
  Background counts = 781.8
  Rate = 0.004 +/- 0.0004
[Fri Jul 13 01:18:54 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 01:18:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 01:18:54 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 01:18:54 2012] Source does appear to be extended
[Fri Jul 13 01:18:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 01:18:54 2012] Source is confused with source 16
[Fri Jul 13 04:31:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 04:31:17 2012] Initial guess for spatial extent in simple fitting = 4.06"
[Fri Jul 13 04:31:17 2012] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.731
[Fri Jul 13 04:31:17 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.06"
[Fri Jul 13 05:05:35 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jul 13 05:05:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_src3.csv
[Fri Jul 13 05:05:35 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jul 13 05:05:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_src3.csv
[Fri Jul 13 05:05:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 05:05:35 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul 13 05:05:35 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul 13 05:05:35 2012] Fit fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jul 13 06:12:36 2012] Spatial fit model total counts = 1300.240000, observed total counts = 1274.000000
[Fri Jul 13 06:12:36 2012] Offset between fit and detection position for source 17 = 0.046535 pixels
[Fri Jul 13 06:12:36 2012] 1315.242000 total counts/ 882.797000 bgd. counts: snr = 14.554606
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.046535 pixels
  Position = (272.3, 321.0) = 10 34 51.14 39 38 34.9
  Extent = 4.4 (4.0-4.8)", rotation angle = 0
  Source counts = 432.4 +/- 36.3
  Background counts = 882.8
  Rate = 0.005 +/- 0.0004
[Fri Jul 13 06:12:36 2012] Spatial fit model total counts = 1168.830000, observed total counts = 1152.000000
[Fri Jul 13 06:12:36 2012] Offset between fit and detection position for source 17 = 0.041445 pixels
[Fri Jul 13 06:12:36 2012] Warning, changing simple spatial fit ID from 3 to 16
[Fri Jul 13 06:12:36 2012] 1182.482000 total counts/ 776.152000 bgd. counts: snr = 14.584969
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.041445 pixels
  Position = (272.3, 321.0) = 10 34 51.15 39 38 35.0
  Extent = 4.2 (3.8-4.8)" x 4.0 (3.5-4.5)", rotation angle = 89 (87-90) degrees
  Source counts = 406.3 +/- 34.4
  Background counts = 776.2
  Rate = 0.004 +/- 0.0004
[Fri Jul 13 06:12:36 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 06:12:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 06:12:36 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 06:12:36 2012] Source does appear to be extended
[Fri Jul 13 06:12:36 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.84
[Sat Jul 14 11:46:25 2012] XMMSAS src. selection expression = ellipse(23638.518000, 27878.154000, 253.408807, 237.433807, 88.899000, X, Y)
[Sat Jul 14 11:46:25 2012] Writing source region out to fullrun_mos1_xmm0506440101_pi300-10000_pass1_cl_src17_src.reg
[Sat Jul 14 11:46:25 2012] Extracting stamp from image fullrun_mos1_xmm0506440101_pi300-10000_cl_sm2.00.img.gz, (258, 306) - (287, 336)
[Sat Jul 14 11:46:25 2012] XMMSAS bgd. selection expression = annulus(23638.518000, 27878.154000, 422.348012, 844.696024, X, Y) && !ellipse(23363.428864, 28249.513794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24839.307600, 27553.015600, 1199.056035, 149.881604, 352.067960, X, Y)
[Sat Jul 14 11:46:25 2012] Writing fullrun_mos1_xmm0506440101_pi300-10000_pass1_cl_src17.gif
[Sat Jul 14 11:51:48 2012] Mean detx,y = (1145.48, -2961.44) 
[Sat Jul 14 11:51:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 11:52:00 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 11:52:00 2012] Setting source spectrum file to fullrun_mos1_xmm0506440101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Jul 14 11:52:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0506440101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Jul 14 14:32:38 2012] Updating aperture counts using extracted products
[Sat Jul 14 14:32:38 2012] Error reading totcts from fullrun_mos1_xmm0506440101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Jul 14 14:32:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 14:32:40 2012] Using photon index=1.80, rate=0.00446, arf fullrun_mos1_xmm0506440101_pi300-10000_pass1_cl_src17.arf
[Sat Jul 14 14:32:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 14:32:40 2012] Updating source flux to 6.9e-14
[Sat Jul 14 14:32:49 2012] Flag c found in src. 17 procflags, skipping spectral fitting