[Thu Jul 12 19:43:49 2012] Detection parameters:
  Position = (305.2, 319.2) = 10 34 38.75 39 38 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92111.8 +/- 358.6
  Background counts = 63.0
  Rate = 1 +/- 0.004

[Thu Jul 12 19:43:49 2012] Off-axis axis estimate = 1.58'
[Thu Jul 12 23:07:33 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 23:07:33 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Thu Jul 12 23:07:33 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.858
[Thu Jul 12 23:07:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.22"
[Thu Jul 12 23:50:44 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul 12 23:50:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src1.csv
[Thu Jul 12 23:50:44 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul 12 23:50:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src1.csv
[Thu Jul 12 23:50:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 23:50:45 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul 12 23:50:45 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul 12 23:50:45 2012] Fit fullrun_mos1_xmm0506440101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 13 01:18:53 2012] Spatial fit model total counts = 79927.000000, observed total counts = 79927.000000
[Fri Jul 13 01:18:53 2012] Offset between fit and detection position for source 1 = 0.187577 pixels
[Fri Jul 13 01:18:53 2012] 79980.400000 total counts/ 16525.000000 bgd. counts: snr = 493.625802
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.187577 pixels
  Position = (305.1, 319.3) = 10 34 38.80 39 38 27.8
  Extent = 5.7 (5.7-5.8)", rotation angle = 0
  Source counts = 63455.4 +/- 282.8
  Background counts = 16525.0
  Rate = 0.7 +/- 0.003
[Fri Jul 13 01:18:54 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 01:18:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 01:18:54 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 01:18:54 2012] Source does appear to be extended
[Fri Jul 13 01:18:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 04:31:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 04:31:17 2012] Initial guess for spatial extent in simple fitting = 5.73"
[Fri Jul 13 04:31:17 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.907
[Fri Jul 13 04:31:17 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.73"
[Fri Jul 13 05:05:35 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 13 05:05:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 05:05:35 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 13 05:05:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 05:05:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 05:05:35 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 13 05:05:35 2012] fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 13 05:05:35 2012] Fit fullrun_mos1_xmm0506440101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 13 06:12:36 2012] Spatial fit model total counts = 79950.100000, observed total counts = 79927.000000
[Fri Jul 13 06:12:36 2012] Offset between fit and detection position for source 1 = 0.001111 pixels
[Fri Jul 13 06:12:36 2012] 80004.500000 total counts/ 16531.800000 bgd. counts: snr = 493.658821
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001111 pixels
  Position = (305.1, 319.3) = 10 34 38.80 39 38 27.8
  Extent = 5.7 (5.7-5.8)", rotation angle = 0
  Source counts = 63472.7 +/- 282.9
  Background counts = 16531.8
  Rate = 0.7 +/- 0.003
[Fri Jul 13 06:12:36 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 06:12:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 06:12:36 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 06:12:36 2012] Source does appear to be extended
[Fri Jul 13 06:12:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 11:46:25 2012] Counts = 63472.700000, rescaling region sizes by 3.000000
[Sat Jul 14 11:46:25 2012] XMMSAS src. selection expression = ellipse(26491.138700, 27733.089400, 1031.950830, 1031.950830, 0.000000, X, Y)
[Sat Jul 14 11:46:25 2012] Writing source region out to fullrun_mos1_xmm0506440101_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul 14 11:46:25 2012] Extracting stamp from image fullrun_mos1_xmm0506440101_pi300-10000_cl_sm2.00.img.gz, (246, 260) - (364, 379)
[Sat Jul 14 11:46:25 2012] XMMSAS bgd. selection expression = annulus(26491.138700, 27733.089400, 5159.754148, 10319.508297, X, Y) && !ellipse(30101.206600, 25513.569400, 388.821611, 388.821611, 0.000000, X, Y) && !ellipse(23638.518000, 27878.154000, 337.878410, 316.578409, 88.899000, X, Y) && !ellipse(22421.151001, 20834.172287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24625.202600, 32887.104800, 365.512011, 365.512011, 0.000000, X, Y) && !ellipse(28749.899809, 22034.997158, 329.899585, 293.386860, 5.961992, X, Y) && !ellipse(23426.095800, 31866.263180, 353.148962, 353.148962, 0.000000, X, Y) && !ellipse(17933.965637, 28566.165863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22384.030760, 29183.226600, 317.529609, 317.529609, 0.000000, X, Y) && !ellipse(36464.619000, 23232.683200, 328.191209, 328.191209, 0.000000, X, Y) && !ellipse(18986.278534, 32594.543579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34312.105927, 28969.533844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23363.428864, 28249.513794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33732.908630, 25713.708588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23566.591705, 25555.880371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15506.328979, 20862.453659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17282.939178, 17021.805099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24839.307600, 27553.015600, 1199.056035, 149.881604, 352.067960, X, Y)
[Sat Jul 14 11:46:25 2012] Writing fullrun_mos1_xmm0506440101_pi300-10000_pass1_cl_src1.gif
[Sat Jul 14 11:46:48 2012] Mean detx,y = (159.70, -281.10) 
[Sat Jul 14 11:46:53 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 11:51:16 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 11:51:17 2012] Setting source spectrum file to fullrun_mos1_xmm0506440101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 14 11:51:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0506440101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul 14 14:32:38 2012] Updating aperture counts using extracted products
[Sat Jul 14 14:32:38 2012] Error reading totcts from fullrun_mos1_xmm0506440101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 14 14:32:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 14:32:40 2012] Using photon index=1.80, rate=0.697, arf fullrun_mos1_xmm0506440101_pi300-10000_pass1_cl_src1.arf
[Sat Jul 14 14:32:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 14:32:40 2012] Updating source flux to 6.2e-12
[Sat Jul 14 14:34:40 2012] Reading fit data from xmm0506440101/analysis//spectral/fullrun_mos1_xmm0506440101_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jul 14 14:34:40 2012] Spectral fit parameter nH value = 7.76536e+19
[Sat Jul 14 14:34:40 2012] Spectral fit parameter PhoIndex value = 3.62178
[Sat Jul 14 14:34:40 2012] Failed to get F(0.3-8.0) from xmm0506440101/analysis//spectral/fullrun_mos1_xmm0506440101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jul 14 14:34:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 14:34:40 2012] Using Nh = 7.8e+19, photon index=3.62, rate=0.697, arf fullrun_mos1_xmm0506440101_pi300-10000_pass1_cl_src1.arf
[Sat Jul 14 14:34:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 14:34:40 2012] Updating source flux to 4.5e-12