[Thu Jul  5 12:19:40 2012] Detection parameters:
  Position = (201.9, 261.0) = 17 3 47.86 -41 40 51.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 209.6 +/- 27.4
  Background counts = 190.5
  Rate = 0.008 +/- 0.001

[Thu Jul  5 12:19:40 2012] Off-axis axis estimate = 7.51'
[Thu Jul  5 12:22:27 2012] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 12:22:27 2012] Initial guess for spatial extent in simple fitting = 10.18"
[Thu Jul  5 12:22:27 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.115
[Thu Jul  5 12:22:27 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.18"
[Thu Jul  5 14:05:16 2012] fullrun_pn_xmm0506410101_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jul  5 14:05:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506410101_pi300-10000_cl_pass0_src5.csv
[Thu Jul  5 14:05:16 2012] fullrun_pn_xmm0506410101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jul  5 14:05:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506410101_pi300-10000_cl_pass0_src5.csv
[Thu Jul  5 14:05:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506410101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506410101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 14:05:16 2012] fullrun_pn_xmm0506410101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jul  5 14:05:16 2012] fullrun_pn_xmm0506410101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jul  5 14:05:16 2012] Fit fullrun_pn_xmm0506410101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Jul  5 16:39:21 2012] Source 5 is offset by -3.572550 and 2.479303 pixels which is larger than
2 X fitted extent = 1.182961 x 1.182961, not incorporating fit results
[Thu Jul  5 16:39:21 2012] Warning, spatial fit 5 centroid is now closest to src. 3
[Thu Jul  5 16:39:21 2012] Spatial fit model total counts = 1416.850000, observed total counts = 1390.000000
[Thu Jul  5 16:39:21 2012] Offset between fit and detection position for source 5 = 1.966766 pixels
[Thu Jul  5 16:39:21 2012] Warning, changing simple spatial fit ID from 5 to 9
[Thu Jul  5 16:39:21 2012] 1381.847000 total counts/ 1218.550000 bgd. counts: snr = 4.677960
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.966766 pixels
  Position = (202.0, 263.0) = 17 3 47.82 -41 40 42.1
  Extent = 20.8 (20.7-41.6)", rotation angle = 0
  Source counts = 163.3 +/- 37.2
  Background counts = 1218.5
  Rate = 0.008 +/- 0.002
[Thu Jul  5 16:39:21 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 16:39:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 16:39:21 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 16:39:21 2012] Source does appear to be extended
[Thu Jul  5 16:39:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 16:39:21 2012] Source is confused with source 2
[Thu Jul  5 16:39:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul  5 16:39:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul  5 16:39:39 2012] Initial guess for spatial extent in simple fitting = 20.79"
[Thu Jul  5 16:39:39 2012] source mask rpix=4.8, npix_max = 111, mask sum = 100, frac = 0.897
[Thu Jul  5 16:39:39 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 20.79"
[Thu Jul  5 18:02:03 2012] fullrun_pn_xmm0506410101_pi300-10000_cl_pass1_src4.ximg exists
[Thu Jul  5 18:02:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506410101_pi300-10000_cl_pass1_src4.csv
[Thu Jul  5 18:02:03 2012] fullrun_pn_xmm0506410101_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Jul  5 18:02:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506410101_pi300-10000_cl_pass1_src4.csv
[Thu Jul  5 18:02:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506410101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506410101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 18:02:03 2012] fullrun_pn_xmm0506410101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Jul  5 18:02:03 2012] fullrun_pn_xmm0506410101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Jul  5 18:02:03 2012] Fit fullrun_pn_xmm0506410101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Jul  5 19:52:26 2012] Warning, spatial fit 4 centroid is now closest to src. 9
[Thu Jul  5 19:52:26 2012] Spatial fit model total counts = 1417.520000, observed total counts = 1390.000000
[Thu Jul  5 19:52:26 2012] Offset between fit and detection position for source 5 = 0.547988 pixels
[Thu Jul  5 19:52:26 2012] Warning, changing simple spatial fit ID from 4 to 7
[Thu Jul  5 19:52:26 2012] 1399.313000 total counts/ 1251.010000 bgd. counts: snr = 4.192949
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.547988 pixels
  Position = (202.0, 263.5) = 17 3 47.83 -41 40 39.7
  Extent = 20.8 (20.7-41.6)", rotation angle = 0
  Source counts = 148.3 +/- 37.4
  Background counts = 1251.0
  Rate = 0.008 +/- 0.002
[Thu Jul  5 19:52:26 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 19:52:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 19:52:26 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 19:52:26 2012] Source does appear to be extended
[Thu Jul  5 19:52:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 19:52:41 2012] XMMSAS src. selection expression = ellipse(17522.258000, 22878.384000, 1247.154036, 1247.154036, 0.000000, X, Y)
[Thu Jul  5 19:52:41 2012] Writing source region out to fullrun_pn_xmm0506410101_pi300-10000_pass1_cl_src5_src.reg
[Thu Jul  5 19:52:41 2012] Extracting stamp from image fullrun_pn_xmm0506410101_pi300-10000_cl_sm2.00.img.gz, (130, 192) - (274, 335)
[Thu Jul  5 19:52:42 2012] XMMSAS bgd. selection expression = annulus(17522.258000, 22878.384000, 2078.590060, 4157.180120, X, Y) && !ellipse(16523.278600, 23312.461000, 1066.896031, 1066.896031, 0.000000, X, Y) && !ellipse(17028.826000, 23008.760000, 2133.792061, 2133.792061, 0.000000, X, Y) && !ellipse(18248.884400, 22432.210000, 1597.992046, 1597.992046, 0.000000, X, Y) && !ellipse(15597.926163, 21869.787704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17265.716003, 21952.408234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16220.072170, 21951.258800, 550.491216, 550.491216, 0.000000, X, Y) && !ellipse(17018.309753, 21482.693726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15118.937637, 21622.305786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16492.032501, 21286.497681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16025.365967, 21441.023041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19239.512573, 21279.384857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18858.379135, 20733.478973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15340.567535, 21011.390182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17940.142563, 20930.151596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16322.042923, 20768.346146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15929.515427, 19873.866776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18146.107788, 19962.856720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15359.504532, 19972.223663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15428.188812, 19483.083633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18959.280869, 19602.103287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18254.253769, 19269.242264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15691.997833, 18937.883987, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul  5 19:52:42 2012] Writing fullrun_pn_xmm0506410101_pi300-10000_pass1_cl_src5.gif
[Thu Jul  5 19:55:01 2012] Mean detx,y = (-9925.82, 2733.91) 
[Thu Jul  5 19:55:03 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 19:55:42 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 19:55:42 2012] Setting source spectrum file to fullrun_pn_xmm0506410101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jul  5 19:55:42 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506410101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Jul  5 21:02:57 2012] Updating aperture counts using extracted products
[Thu Jul  5 21:02:57 2012] Error reading totcts from fullrun_pn_xmm0506410101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jul  5 21:02:57 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 21:02:57 2012] Using photon index=1.80, rate=0.00757, arf fullrun_pn_xmm0506410101_pi300-10000_pass1_cl_src5.arf
[Thu Jul  5 21:02:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 21:02:57 2012] Updating source flux to 3.4e-14
[Thu Jul  5 21:05:14 2012] Flag b found in src. 5 procflags, skipping spectral fitting
[Thu Jul  5 21:05:14 2012] Flag c found in src. 5 procflags, skipping spectral fitting