[Thu Jul  5 12:20:21 2012] Detection parameters:
  Position = (351.6, 381.7) = 17 2 49.76 -41 32 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.9 +/- 12.1
  Background counts = 26.9
  Rate = 0.003 +/- 0.0005

[Thu Jul  5 12:20:21 2012] Off-axis axis estimate = 7.17'
[Thu Jul  5 15:00:07 2012] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 15:00:07 2012] Initial guess for spatial extent in simple fitting = 10.01"
[Thu Jul  5 15:00:07 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.956
[Thu Jul  5 15:00:07 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 10.01"
[Thu Jul  5 16:39:11 2012] fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_src18.ximg exists
[Thu Jul  5 16:39:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_src18.csv
[Thu Jul  5 16:39:11 2012] fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Jul  5 16:39:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_src18.csv
[Thu Jul  5 16:39:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 16:39:12 2012] fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Jul  5 16:39:12 2012] fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Jul  5 16:39:12 2012] Fit fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Thu Jul  5 16:39:30 2012] Spatial fit model total counts = 342.125000, observed total counts = 342.000000
[Thu Jul  5 16:39:30 2012] Offset between fit and detection position for source 6 = 0.303825 pixels
[Thu Jul  5 16:39:30 2012] 346.539700 total counts/ 321.163000 bgd. counts: snr = 1.416030
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.303825 pixels
  Position = (351.4, 382.0) = 17 2 49.84 -41 32 4.8
  Extent = 2.5" x 2.5", rotation angle = 0
  Source counts = 25.4 +/- 18.6
  Background counts = 321.2
  Rate = 0.0007 +/- 0.0005
  Deleting source due to low Poisson probability