[Thu Jul 5 12:20:21 2012] Detection parameters: Position = (229.0, 238.0) = 17 3 37.34 -41 42 31.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 56.5 +/- 13.5 Background counts = 41.4 Rate = 0.003 +/- 0.0007 [Thu Jul 5 12:20:21 2012] Off-axis axis estimate = 6.67' [Thu Jul 5 15:00:07 2012] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting [Thu Jul 5 15:00:07 2012] Initial guess for spatial extent in simple fitting = 9.76" [Thu Jul 5 15:00:07 2012] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.195 [Thu Jul 5 15:00:07 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 9.76" [Thu Jul 5 16:39:11 2012] fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_src17.ximg exists [Thu Jul 5 16:39:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_src17.csv [Thu Jul 5 16:39:11 2012] fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_src17_1.ximg exists [Thu Jul 5 16:39:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_src17.csv [Thu Jul 5 16:39:11 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_src17_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jul 5 16:39:12 2012] fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists [Thu Jul 5 16:39:12 2012] fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists [Thu Jul 5 16:39:12 2012] Fit fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly [Thu Jul 5 16:39:30 2012] Spatial fit model total counts = 802.091000, observed total counts = 802.000000 [Thu Jul 5 16:39:30 2012] Offset between fit and detection position for source 29 = 1.171834 pixels [Thu Jul 5 16:39:30 2012] Warning, changing simple spatial fit ID from 17 to 13 [Thu Jul 5 16:39:30 2012] 743.357410 total counts/ 733.577000 bgd. counts: snr = 0.361106 Spatial fit parameters: Offset between fit and detection position for source 29 = 1.171834 pixels Position = (228.5, 239.1) = 17 3 37.54 -41 42 26.1 Extent = 2.5 (2.4-13.1)", rotation angle = 0 Source counts = 9.8 +/- 27.3 Background counts = 733.6 Rate = 0.0003 +/- 0.0008 Deleting source due to low Poisson probability