[Thu Jul  5 12:20:21 2012] Detection parameters:
  Position = (208.2, 264.8) = 17 3 45.40 -41 40 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.8 +/- 16.2
  Background counts = 40.9
  Rate = 0.005 +/- 0.0008

[Thu Jul  5 12:20:21 2012] Off-axis axis estimate = 6.98'
[Thu Jul  5 15:00:07 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 15:00:07 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Thu Jul  5 15:00:07 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.164
[Thu Jul  5 15:00:07 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.92"
[Thu Jul  5 16:39:11 2012] fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_src4.ximg exists
[Thu Jul  5 16:39:11 2012] fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Jul  5 16:39:11 2012] Fit fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_src4 appears to have run properly
[Thu Jul  5 16:39:12 2012] fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Jul  5 16:39:12 2012] fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Jul  5 16:39:12 2012] Fit fullrun_mos2_xmm0506410101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Jul  5 16:39:30 2012] Warning, spatial fit 4 centroid is now closest to src. 12
[Thu Jul  5 16:39:30 2012] Source 10 is offset by -0.293301 and -2.678113 pixels which is larger than
2 X fitted extent = 1.186317 x 1.186317, not incorporating fit results
[Thu Jul  5 16:39:30 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 16:39:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 16:39:30 2012] Assessing source extent using major
[Thu Jul  5 16:39:30 2012] Source does appear to be extended
[Thu Jul  5 16:39:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 16:39:30 2012] Source is confused with source 3
[Thu Jul  5 18:39:45 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 18:39:45 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Thu Jul  5 18:39:45 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.164
[Thu Jul  5 18:39:45 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.92"
[Thu Jul  5 19:52:17 2012] fullrun_mos2_xmm0506410101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jul  5 19:52:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506410101_pi300-10000_cl_pass1_src3.csv
[Thu Jul  5 19:52:17 2012] fullrun_mos2_xmm0506410101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jul  5 19:52:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506410101_pi300-10000_cl_pass1_src3.csv
[Thu Jul  5 19:52:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506410101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506410101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 19:52:18 2012] fullrun_mos2_xmm0506410101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jul  5 19:52:18 2012] fullrun_mos2_xmm0506410101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jul  5 19:52:18 2012] Fit fullrun_mos2_xmm0506410101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jul  5 19:52:33 2012] Spatial fit model total counts = 2115.950000, observed total counts = 2117.000000
[Thu Jul  5 19:52:33 2012] Offset between fit and detection position for source 10 = 4.841951 pixels
[Thu Jul  5 19:52:33 2012] Warning, changing simple spatial fit ID from 3 to 1
[Thu Jul  5 19:52:33 2012] 2079.055000 total counts/ 1532.090000 bgd. counts: snr = 13.973893
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 4.841951 pixels
  Position = (209.0, 260.0) = 17 3 45.09 -41 40 54.9
  Extent = 26.3 (26.2-52.5)", rotation angle = 0
  Source counts = 547.0 +/- 45.6
  Background counts = 1532.1
  Rate = 0.02 +/- 0.001
[Thu Jul  5 19:52:33 2012] Spatial fit model total counts = 1022.610000, observed total counts = 1021.000000
[Thu Jul  5 19:52:33 2012] Offset between fit and detection position for source 10 = 1.751846 pixels
[Thu Jul  5 19:52:33 2012] Warning, changing simple spatial fit ID from 1 to 3
[Thu Jul  5 19:52:33 2012] 943.135000 total counts/ 650.031000 bgd. counts: snr = 11.496211
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.751846 pixels
  Position = (210.6, 260.8) = 17 3 44.47 -41 40 51.6
  Extent = 19.8 (19.8-39.7)", rotation angle = 0
  Source counts = 293.1 +/- 30.7
  Background counts = 650.0
  Rate = 0.009 +/- 0.0009
[Thu Jul  5 19:52:34 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 19:52:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 19:52:34 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 19:52:34 2012] Source does appear to be extended
[Thu Jul  5 19:52:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 20:39:49 2012] XMMSAS src. selection expression = ellipse(18274.398000, 22640.784000, 1190.334034, 1190.334034, 0.000000, X, Y)
[Thu Jul  5 20:39:49 2012] Writing source region out to fullrun_mos2_xmm0506410101_pi300-10000_pass1_cl_src10_src.reg
[Thu Jul  5 20:39:49 2012] Extracting stamp from image fullrun_mos2_xmm0506410101_pi300-10000_cl_sm2.00.img.gz, (142, 192) - (279, 329)
[Thu Jul  5 20:39:49 2012] XMMSAS bgd. selection expression = annulus(18274.398000, 22640.784000, 1983.890057, 3967.780114, X, Y) && !ellipse(18504.149800, 21909.804000, 1050.584030, 1050.584030, 0.000000, X, Y) && !ellipse(17644.648422, 22819.846130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18537.870636, 22897.548218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17373.650909, 23171.913635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18660.777252, 20405.602768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16478.147220, 23234.795400, 760.666422, 760.666422, 0.000000, X, Y) && !ellipse(16978.441833, 23183.062103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19070.039398, 21896.041962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19670.012000, 21522.512000, 1557.792045, 1557.792045, 0.000000, X, Y) && !ellipse(18704.459122, 21344.028183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15509.082245, 19862.390411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16016.986694, 21804.720901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14939.619614, 22269.044373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18477.529785, 19333.940018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18334.020000, 19722.322000, 1378.448040, 1378.448040, 0.000000, X, Y) && !ellipse(16622.309479, 22137.016403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16653.889725, 21595.014740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15265.363831, 23023.497498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17015.778000, 20028.702200, 1714.336049, 1714.336049, 0.000000, X, Y)
[Thu Jul  5 20:39:49 2012] Writing fullrun_mos2_xmm0506410101_pi300-10000_pass1_cl_src10.gif
[Thu Jul  5 20:40:21 2012] Mean detx,y = (9385.39, -3324.13) 
[Thu Jul  5 20:40:22 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 20:41:02 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 20:41:02 2012] Setting source spectrum file to fullrun_mos2_xmm0506410101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jul  5 20:41:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506410101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Jul  5 21:02:58 2012] Updating aperture counts using extracted products
[Thu Jul  5 21:02:58 2012] Error reading totcts from fullrun_mos2_xmm0506410101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jul  5 21:02:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 21:02:58 2012] Using photon index=1.80, rate=0.00852, arf fullrun_mos2_xmm0506410101_pi300-10000_pass1_cl_src10.arf
[Thu Jul  5 21:02:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 21:02:58 2012] Updating source flux to 1.4e-13
[Thu Jul  5 21:04:08 2012] Flag b found in src. 10 procflags, skipping spectral fitting
[Thu Jul  5 21:04:08 2012] Flag c found in src. 10 procflags, skipping spectral fitting