[Wed Jun 20 18:33:15 2012] Detection parameters:
  Position = (243.7, 369.9) = 13 22 33.90 -16 35 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.6 +/- 22.1
  Background counts = 193.5
  Rate = 0.002 +/- 0.0004

[Wed Jun 20 18:33:15 2012] Off-axis axis estimate = 6.53'
[Wed Jun 20 18:38:55 2012] Using EEF radius (= 9.69 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 18:38:55 2012] Initial guess for spatial extent in simple fitting = 9.69"
[Wed Jun 20 18:38:55 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.007
[Wed Jun 20 18:38:55 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 9.69"
[Wed Jun 20 20:14:47 2012] fullrun_pn_xmm0506340101_pi300-10000_cl_pass0_src45.ximg exists
[Wed Jun 20 20:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506340101_pi300-10000_cl_pass0_src45.csv
[Wed Jun 20 20:14:47 2012] fullrun_pn_xmm0506340101_pi300-10000_cl_pass0_src45_1.ximg exists
[Wed Jun 20 20:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506340101_pi300-10000_cl_pass0_src45.csv
[Wed Jun 20 20:14:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506340101_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506340101_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 20:14:48 2012] fullrun_pn_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Wed Jun 20 20:14:48 2012] fullrun_pn_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Wed Jun 20 20:14:48 2012] Fit fullrun_pn_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Wed Jun 20 22:23:57 2012] Spatial fit model total counts = 1309.470000, observed total counts = 1312.000000
[Wed Jun 20 22:23:57 2012] Offset between fit and detection position for source 45 = 3.233234 pixels
[Wed Jun 20 22:23:57 2012] 1283.396000 total counts/ 1016.300000 bgd. counts: snr = 8.378310
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 3.233234 pixels
  Position = (242.7, 373.0) = 13 22 34.19 -16 35 42.1
  Extent = 15.8 (12.2-15.8)", rotation angle = 0
  Source counts = 267.1 +/- 35.8
  Background counts = 1016.3
  Rate = 0.004 +/- 0.0005
[Wed Jun 20 22:23:57 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 22:23:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 22:23:57 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 22:23:57 2012] Source does appear to be extended
[Wed Jun 20 22:23:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 22:24:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 20 22:24:27 2012] Initial guess for spatial extent in simple fitting = 15.76"
[Wed Jun 20 22:24:27 2012] source mask rpix=3.6, npix_max = 68, mask sum = 64, frac = 0.941
[Wed Jun 20 22:24:27 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 15.76"
[Thu Jun 21 00:02:19 2012] fullrun_pn_xmm0506340101_pi300-10000_cl_pass1_src45.ximg exists
[Thu Jun 21 00:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506340101_pi300-10000_cl_pass1_src45.csv
[Thu Jun 21 00:02:19 2012] fullrun_pn_xmm0506340101_pi300-10000_cl_pass1_src45_1.ximg exists
[Thu Jun 21 00:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506340101_pi300-10000_cl_pass1_src45.csv
[Thu Jun 21 00:02:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506340101_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506340101_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 00:02:19 2012] fullrun_pn_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Thu Jun 21 00:02:19 2012] fullrun_pn_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Thu Jun 21 00:02:19 2012] Fit fullrun_pn_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Thu Jun 21 01:55:55 2012] Warning, spatial fit 45 centroid is now closest to src. 49
[Thu Jun 21 01:55:55 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 01:55:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 01:55:55 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 01:55:55 2012] Source does appear to be extended
[Thu Jun 21 01:55:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 01:56:23 2012] XMMSAS src. selection expression = ellipse(21067.420000, 32404.954800, 945.702027, 945.702027, 0.000000, X, Y)
[Thu Jun 21 01:56:23 2012] Writing source region out to fullrun_pn_xmm0506340101_pi300-10000_pass1_cl_src45_src.reg
[Thu Jun 21 01:56:23 2012] Extracting stamp from image fullrun_pn_xmm0506340101_pi300-10000_cl_sm2.00.img.gz, (188, 319) - (297, 427)
[Thu Jun 21 01:56:23 2012] XMMSAS bgd. selection expression = annulus(21067.420000, 32404.954800, 1576.170045, 3152.340091, X, Y) && !ellipse(21977.935620, 31435.063200, 408.545612, 408.545612, 0.000000, X, Y) && !ellipse(18025.237579, 36357.869720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18407.543213, 35662.960938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20396.773468, 31280.131500, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 01:56:23 2012] Writing fullrun_pn_xmm0506340101_pi300-10000_pass1_cl_src45.gif
[Thu Jun 21 02:59:15 2012] Mean detx,y = (822.25, 9328.22) 
[Thu Jun 21 02:59:19 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 03:00:18 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 03:00:18 2012] Setting source spectrum file to fullrun_pn_xmm0506340101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Thu Jun 21 03:00:18 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506340101_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Thu Jun 21 06:32:54 2012] Updating aperture counts using extracted products
[Thu Jun 21 06:32:54 2012] Error reading totcts from fullrun_pn_xmm0506340101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Thu Jun 21 06:32:55 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 06:32:55 2012] Using photon index=1.80, rate=0.00376, arf fullrun_pn_xmm0506340101_pi300-10000_pass1_cl_src45.arf
[Thu Jun 21 06:32:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 06:32:55 2012] Updating source flux to 1.5e-14