[Wed Jun 20 18:33:14 2012] Detection parameters:
  Position = (344.3, 158.1) = 13 22 3.43 -16 51 17.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1560.1 +/- 50.3
  Background counts = 188.2
  Rate = 0.02 +/- 0.0006

[Wed Jun 20 18:33:15 2012] Off-axis axis estimate = 10.70'
[Wed Jun 20 18:38:55 2012] Using EEF radius (= 11.78 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 18:38:55 2012] Initial guess for spatial extent in simple fitting = 11.78"
[Wed Jun 20 18:38:55 2012] source mask rpix=2.7, npix_max = 41, mask sum = 40, frac = 0.972
[Wed Jun 20 18:38:55 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.78"
[Wed Jun 20 20:14:47 2012] fullrun_pn_xmm0506340101_pi300-10000_cl_pass0_src11.ximg exists
[Wed Jun 20 20:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506340101_pi300-10000_cl_pass0_src11.csv
[Wed Jun 20 20:14:47 2012] fullrun_pn_xmm0506340101_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Jun 20 20:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506340101_pi300-10000_cl_pass0_src11.csv
[Wed Jun 20 20:14:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506340101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506340101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 20:14:48 2012] fullrun_pn_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Jun 20 20:14:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Jun 20 20:14:48 2012] fullrun_pn_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jun 20 20:14:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Jun 20 20:14:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 22:23:57 2012] Warning, spatial fit 11 centroid is now closest to src. 66
[Wed Jun 20 22:23:57 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 22:23:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 22:23:57 2012] Assessing source extent using major
[Wed Jun 20 22:23:57 2012] Source does appear to be extended
[Wed Jun 20 22:23:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 22:24:27 2012] Using EEF radius (= 11.78 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 22:24:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 20 22:24:27 2012] Initial guess for spatial extent in simple fitting = 11.78"
[Wed Jun 20 22:24:27 2012] source mask rpix=2.7, npix_max = 41, mask sum = 40, frac = 0.972
[Wed Jun 20 22:24:27 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 11.78"
[Thu Jun 21 00:02:18 2012] fullrun_pn_xmm0506340101_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jun 21 00:02:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506340101_pi300-10000_cl_pass1_src11.csv
[Thu Jun 21 00:02:18 2012] fullrun_pn_xmm0506340101_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jun 21 00:02:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506340101_pi300-10000_cl_pass1_src11.csv
[Thu Jun 21 00:02:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506340101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506340101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 00:02:19 2012] fullrun_pn_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jun 21 00:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu Jun 21 00:02:19 2012] fullrun_pn_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jun 21 00:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu Jun 21 00:02:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 01:55:55 2012] Warning, spatial fit 11 centroid is now closest to src. 66
[Thu Jun 21 01:55:55 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 11.037683 pixels away
[Thu Jun 21 01:55:55 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 01:55:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 01:55:55 2012] Assessing source extent using major
[Thu Jun 21 01:55:55 2012] Source does appear to be extended
[Thu Jun 21 01:55:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 01:56:23 2012] Counts = 1560.134399, rescaling region sizes by 2.000000
[Thu Jun 21 01:56:23 2012] XMMSAS src. selection expression = ellipse(29905.359985, 13708.234283, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jun 21 01:56:23 2012] Writing source region out to fullrun_pn_xmm0506340101_pi300-10000_pass1_cl_src11_src.reg
[Thu Jun 21 01:56:23 2012] Extracting stamp from image fullrun_pn_xmm0506340101_pi300-10000_cl_sm2.00.img.gz, (269, 83) - (419, 233)
[Thu Jun 21 01:56:23 2012] XMMSAS bgd. selection expression = annulus(29905.359985, 13708.234283, 4350.000000, 8700.000000, X, Y) && !ellipse(22004.035400, 18358.039800, 448.182413, 448.182413, 0.000000, X, Y) && !ellipse(23871.295600, 22785.287000, 1370.157639, 1370.157639, 0.000000, X, Y) && !ellipse(20613.153046, 18022.492279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30032.891663, 16019.159836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35235.373600, 13549.596000, 440.221613, 440.221613, 0.000000, X, Y) && !ellipse(32679.018646, 12448.750778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28015.868000, 14018.233400, 1853.600053, 1853.600053, 0.000000, X, Y) && !ellipse(25724.182678, 9931.072121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25067.863200, 10291.811200, 545.749616, 545.749616, 0.000000, X, Y) && !ellipse(37550.333649, 22626.246704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32397.189941, 22022.125320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23889.538849, 21357.228989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28659.091888, 10643.988640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28525.617200, 17803.745800, 478.057614, 328.339209, 324.113661, X, Y) && !ellipse(38982.034302, 17678.962021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24801.992767, 17004.704056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30905.390045, 11095.206223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29669.096893, 23007.854065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21691.925964, 22768.134125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26432.403778, 22516.267426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32178.339600, 19896.705000, 424.767212, 267.744808, 110.368554, X, Y) && !ellipse(29016.883636, 19636.018631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28547.894000, 19373.096000, 315.549609, 315.549609, 0.000000, X, Y) && !ellipse(23451.626282, 18461.705811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23744.037933, 16718.696335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25122.276917, 11887.416519, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 01:56:23 2012] Writing fullrun_pn_xmm0506340101_pi300-10000_pass1_cl_src11.gif
[Thu Jun 21 02:11:49 2012] Mean detx,y = (82.62, -11306.57) 
[Thu Jun 21 02:11:56 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 02:14:25 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 02:14:26 2012] Setting source spectrum file to fullrun_pn_xmm0506340101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jun 21 02:14:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506340101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Jun 21 04:10:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 21 04:10:46 2012] rmf not generated due to insufficient counts
[Thu Jun 21 06:32:54 2012] Updating aperture counts using extracted products
[Thu Jun 21 06:32:54 2012] Error reading totcts from fullrun_pn_xmm0506340101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jun 21 06:32:55 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 06:32:55 2012] Using photon index=1.80, rate=0.0176, arf fullrun_pn_xmm0506340101_pi300-10000_pass1_cl_src11.arf
[Thu Jun 21 06:32:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 06:32:55 2012] Updating source flux to 8.5e-14
[Thu Jun 21 06:35:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting