[Wed Jun 20 18:34:02 2012] Detection parameters:
  Position = (354.5, 199.6) = 13 22 0.36 -16 48 16.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.1 +/- 13.8
  Background counts = 59.2
  Rate = 0.001 +/- 0.0003

[Wed Jun 20 18:34:02 2012] Off-axis axis estimate = 8.23'
[Wed Jun 20 21:17:40 2012] Using EEF radius (= 10.55 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 21:17:40 2012] Initial guess for spatial extent in simple fitting = 10.55"
[Wed Jun 20 21:17:40 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.877
[Wed Jun 20 21:17:40 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 10.55"
[Wed Jun 20 22:23:40 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src39.ximg exists
[Wed Jun 20 22:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src39.csv
[Wed Jun 20 22:23:40 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed Jun 20 22:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src39.csv
[Wed Jun 20 22:23:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 22:23:41 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed Jun 20 22:23:41 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed Jun 20 22:23:41 2012] Fit fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Wed Jun 20 22:24:13 2012] Source 42 is offset by -3.082940 and 9.182990 pixels which is larger than
2 X fitted extent = 1.212782 x 1.212782, not incorporating fit results
[Wed Jun 20 22:24:13 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 22:24:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 22:24:13 2012] Assessing source extent using major
[Wed Jun 20 22:24:13 2012] Source does appear to be extended
[Wed Jun 20 22:24:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 00:56:38 2012] Using EEF radius (= 10.55 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 00:56:38 2012] Initial guess for spatial extent in simple fitting = 10.55"
[Thu Jun 21 00:56:38 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.877
[Thu Jun 21 00:56:38 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 10.55"
[Thu Jun 21 01:55:41 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_src37.ximg exists
[Thu Jun 21 01:55:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_src37.csv
[Thu Jun 21 01:55:41 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_src37_1.ximg exists
[Thu Jun 21 01:55:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_src37.csv
[Thu Jun 21 01:55:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 01:55:42 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Thu Jun 21 01:55:42 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Thu Jun 21 01:55:42 2012] Fit fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Thu Jun 21 01:56:08 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 13.654752 pixels away
[Thu Jun 21 01:56:08 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 01:56:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 01:56:08 2012] Assessing source extent using major
[Thu Jun 21 01:56:08 2012] Source does appear to be extended
[Thu Jun 21 01:56:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 05:46:39 2012] XMMSAS src. selection expression = ellipse(30789.296234, 17320.452087, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 05:46:39 2012] Writing source region out to fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src42_src.reg
[Thu Jun 21 05:46:39 2012] Extracting stamp from image fullrun_mos2_xmm0506340101_pi300-10000_cl_sm2.00.img.gz, (317, 162) - (392, 237)
[Thu Jun 21 05:46:39 2012] XMMSAS bgd. selection expression = annulus(30789.296234, 17320.452087, 1087.500000, 2175.000000, X, Y) && !ellipse(30025.723083, 15991.949768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28517.506366, 19408.505573, 421.835978, 248.672321, 332.282756, X, Y) && !ellipse(28550.904755, 17804.262146, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 05:46:39 2012] Writing fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src42.gif
[Thu Jun 21 05:59:56 2012] Mean detx,y = (2301.52, 8196.49) 
[Thu Jun 21 05:59:57 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 06:00:14 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 06:00:14 2012] Setting source spectrum file to fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Thu Jun 21 06:00:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Thu Jun 21 06:26:19 2012] Not generating rmf since there are only 60 counts
[Thu Jun 21 06:26:19 2012] rmf not generated due to insufficient counts
[Thu Jun 21 06:32:58 2012] Updating aperture counts using extracted products
[Thu Jun 21 06:32:58 2012] Error reading totcts from fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Thu Jun 21 06:32:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 06:32:58 2012] Using photon index=1.80, rate=0.00114, arf fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src42.arf
[Thu Jun 21 06:32:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 06:32:58 2012] Updating source flux to 2e-14
[Thu Jun 21 06:33:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting