[Wed Jun 20 18:34:01 2012] Detection parameters:
  Position = (261.6, 276.0) = 13 22 28.48 -16 42 43.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.9 +/- 17.1
  Background counts = 65.6
  Rate = 0.001 +/- 0.0002

[Wed Jun 20 18:34:02 2012] Off-axis axis estimate = 3.13'
[Wed Jun 20 21:17:40 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 21:17:40 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Wed Jun 20 21:17:40 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.915
[Wed Jun 20 21:17:40 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 7.99"
[Wed Jun 20 22:23:40 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src38.ximg exists
[Wed Jun 20 22:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src38.csv
[Wed Jun 20 22:23:40 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src38_1.ximg exists
[Wed Jun 20 22:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src38.csv
[Wed Jun 20 22:23:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 22:23:41 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Wed Jun 20 22:23:41 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Wed Jun 20 22:23:41 2012] Fit fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Wed Jun 20 22:24:13 2012] Spatial fit model total counts = 775.548000, observed total counts = 774.000000
[Wed Jun 20 22:24:13 2012] Offset between fit and detection position for source 32 = 0.084163 pixels
[Wed Jun 20 22:24:13 2012] 768.199600 total counts/ 724.145000 bgd. counts: snr = 1.637112
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.084163 pixels
  Position = (261.7, 276.0) = 13 22 28.46 -16 42 44.4
  Extent = 3.5 (2.4-5.1)", rotation angle = 0
  Source counts = 44.1 +/- 27.7
  Background counts = 724.1
  Rate = 0.0005 +/- 0.0003
  Deleting source due to low Poisson probability