[Wed Jun 20 18:34:01 2012] Detection parameters:
  Position = (410.0, 308.1) = 13 21 43.56 -16 40 24.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.5 +/- 17.0
  Background counts = 50.0
  Rate = 0.002 +/- 0.0002

[Wed Jun 20 18:34:02 2012] Off-axis axis estimate = 8.12'
[Wed Jun 20 21:17:40 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 21:17:40 2012] Initial guess for spatial extent in simple fitting = 10.49"
[Wed Jun 20 21:17:40 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.062
[Wed Jun 20 21:17:40 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 10.49"
[Wed Jun 20 22:23:40 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src30.ximg exists
[Wed Jun 20 22:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src30.csv
[Wed Jun 20 22:23:40 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src30_1.ximg exists
[Wed Jun 20 22:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src30.csv
[Wed Jun 20 22:23:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 22:23:41 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Wed Jun 20 22:23:41 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Wed Jun 20 22:23:41 2012] Fit fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Wed Jun 20 22:24:13 2012] Spatial fit model total counts = 568.735000, observed total counts = 514.000000
[Wed Jun 20 22:24:13 2012] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 20 22:24:13 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 22:24:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 22:24:13 2012] Assessing source extent using major
[Wed Jun 20 22:24:13 2012] Source does appear to be extended
[Wed Jun 20 22:24:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 00:56:38 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 00:56:38 2012] Initial guess for spatial extent in simple fitting = 10.49"
[Thu Jun 21 00:56:38 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.062
[Thu Jun 21 00:56:38 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 10.49"
[Thu Jun 21 01:55:41 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_src29.ximg exists
[Thu Jun 21 01:55:41 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_src29_1.ximg exists
[Thu Jun 21 01:55:41 2012] Fit fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_src29 appears to have run properly
[Thu Jun 21 01:55:42 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Thu Jun 21 01:55:42 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Thu Jun 21 01:55:42 2012] Fit fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Thu Jun 21 01:56:08 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 13.781664 pixels away
[Thu Jun 21 01:56:08 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 01:56:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 01:56:08 2012] Assessing source extent using major
[Thu Jun 21 01:56:08 2012] Source does appear to be extended
[Thu Jun 21 01:56:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 05:46:39 2012] XMMSAS src. selection expression = ellipse(35619.577759, 26754.772125, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 05:46:39 2012] Writing source region out to fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src28_src.reg
[Thu Jun 21 05:46:39 2012] Extracting stamp from image fullrun_mos2_xmm0506340101_pi300-10000_cl_sm2.00.img.gz, (372, 271) - (447, 346)
[Thu Jun 21 05:46:39 2012] XMMSAS bgd. selection expression = annulus(35619.577759, 26754.772125, 1087.500000, 2175.000000, X, Y) && !ellipse(33680.113373, 25017.108551, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 05:46:39 2012] Writing fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src28.gif
[Thu Jun 21 05:56:58 2012] Mean detx,y = (10448.99, 1401.34) 
[Thu Jun 21 05:56:59 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 05:57:08 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 05:57:08 2012] Setting source spectrum file to fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Jun 21 05:57:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Thu Jun 21 06:24:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 21 06:24:54 2012] rmf not generated due to insufficient counts
[Thu Jun 21 06:32:57 2012] Updating aperture counts using extracted products
[Thu Jun 21 06:32:57 2012] Error reading totcts from fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Jun 21 06:32:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 06:32:58 2012] Using photon index=1.80, rate=0.00151, arf fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src28.arf
[Thu Jun 21 06:32:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 06:32:58 2012] Updating source flux to 3.1e-14
[Thu Jun 21 06:33:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting