[Wed Jun 20 18:34:01 2012] Detection parameters:
  Position = (237.8, 207.1) = 13 22 35.68 -16 47 42.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 197.8 +/- 19.2
  Background counts = 64.1
  Rate = 0.004 +/- 0.0004

[Wed Jun 20 18:34:02 2012] Off-axis axis estimate = 7.95'
[Wed Jun 20 21:17:40 2012] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 21:17:40 2012] Initial guess for spatial extent in simple fitting = 10.40"
[Wed Jun 20 21:17:40 2012] source mask rpix=2.4, npix_max = 33, mask sum = 26, frac = 0.778
[Wed Jun 20 21:17:40 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.40"
[Wed Jun 20 22:23:40 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src11.ximg exists
[Wed Jun 20 22:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src11.csv
[Wed Jun 20 22:23:40 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Jun 20 22:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src11.csv
[Wed Jun 20 22:23:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 22:23:40 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Jun 20 22:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Jun 20 22:23:40 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jun 20 22:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Jun 20 22:23:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 22:24:13 2012] Warning, spatial fit 11 centroid is now closest to src. 1
[Wed Jun 20 22:24:13 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 22:24:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 22:24:13 2012] Assessing source extent using major
[Wed Jun 20 22:24:13 2012] Source does appear to be extended
[Wed Jun 20 22:24:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 00:56:38 2012] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 00:56:38 2012] Initial guess for spatial extent in simple fitting = 10.40"
[Thu Jun 21 00:56:38 2012] source mask rpix=2.4, npix_max = 33, mask sum = 26, frac = 0.778
[Thu Jun 21 00:56:38 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.40"
[Thu Jun 21 01:55:41 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jun 21 01:55:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_src11.csv
[Thu Jun 21 01:55:41 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jun 21 01:55:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_src11.csv
[Thu Jun 21 01:55:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 01:55:41 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jun 21 01:55:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu Jun 21 01:55:41 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jun 21 01:55:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu Jun 21 01:55:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 01:56:08 2012] Warning, spatial fit 11 centroid is now closest to src. 1
[Thu Jun 21 01:56:08 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 01:56:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 01:56:08 2012] Assessing source extent using major
[Thu Jun 21 01:56:08 2012] Source does appear to be extended
[Thu Jun 21 01:56:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 05:46:39 2012] XMMSAS src. selection expression = ellipse(20643.692520, 17967.404404, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 05:46:39 2012] Writing source region out to fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src14_src.reg
[Thu Jun 21 05:46:39 2012] Extracting stamp from image fullrun_mos2_xmm0506340101_pi300-10000_cl_sm2.00.img.gz, (200, 170) - (275, 245)
[Thu Jun 21 05:46:39 2012] XMMSAS bgd. selection expression = annulus(20643.692520, 17967.404404, 1087.500000, 2175.000000, X, Y) && !ellipse(21996.232147, 18379.621597, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 05:46:39 2012] Writing fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src14.gif
[Thu Jun 21 05:51:57 2012] Mean detx,y = (-6807.43, 3633.04) 
[Thu Jun 21 05:51:59 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 05:52:18 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 05:52:19 2012] Setting source spectrum file to fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Jun 21 05:52:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Thu Jun 21 06:18:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 21 06:18:56 2012] rmf not generated due to insufficient counts
[Thu Jun 21 06:32:57 2012] Updating aperture counts using extracted products
[Thu Jun 21 06:32:57 2012] Error reading totcts from fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Jun 21 06:32:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 06:32:58 2012] Using photon index=1.80, rate=0.00384, arf fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src14.arf
[Thu Jun 21 06:32:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 06:32:58 2012] Updating source flux to 7.1e-14
[Thu Jun 21 06:33:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting