[Wed Jun 20 18:34:01 2012] Detection parameters:
  Position = (253.4, 211.8) = 13 22 30.97 -16 47 23.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2015.0 +/- 55.9
  Background counts = 68.3
  Rate = 0.03 +/- 0.0008

[Wed Jun 20 18:34:02 2012] Off-axis axis estimate = 7.08'
[Wed Jun 20 21:17:40 2012] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 21:17:40 2012] Initial guess for spatial extent in simple fitting = 9.97"
[Wed Jun 20 21:17:40 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.963
[Wed Jun 20 21:17:40 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.97"
[Wed Jun 20 22:23:39 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jun 20 22:23:39 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jun 20 22:23:39 2012] Fit fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_src2 appears to have run properly
[Wed Jun 20 22:23:40 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jun 20 22:23:40 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jun 20 22:23:40 2012] Fit fullrun_mos2_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Jun 20 22:24:13 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.823621 pixels away
[Wed Jun 20 22:24:13 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.947312 pixels away
[Wed Jun 20 22:24:13 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 22:24:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 22:24:13 2012] Assessing source extent using major
[Wed Jun 20 22:24:13 2012] Source does appear to be extended
[Wed Jun 20 22:24:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 00:56:38 2012] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 00:56:38 2012] Initial guess for spatial extent in simple fitting = 9.97"
[Thu Jun 21 00:56:38 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.963
[Thu Jun 21 00:56:38 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.97"
[Thu Jun 21 01:55:41 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jun 21 01:55:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_src2.csv
[Thu Jun 21 01:55:41 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jun 21 01:55:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_src2.csv
[Thu Jun 21 01:55:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 01:55:41 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jun 21 01:55:41 2012] fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jun 21 01:55:41 2012] Fit fullrun_mos2_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Jun 21 01:56:08 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.823621 pixels away
[Thu Jun 21 01:56:08 2012] Source 1 is offset by 5.822186 and -5.748051 pixels which is larger than
2 X fitted extent = 1.195692 x 1.195692, not incorporating fit results
[Thu Jun 21 01:56:08 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 01:56:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 01:56:08 2012] Assessing source extent using major
[Thu Jun 21 01:56:08 2012] Source does appear to be extended
[Thu Jun 21 01:56:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 05:46:39 2012] Counts = 2014.961548, rescaling region sizes by 2.000000
[Thu Jun 21 05:46:39 2012] XMMSAS src. selection expression = ellipse(21996.232147, 18379.621597, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jun 21 05:46:39 2012] Writing source region out to fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 21 05:46:39 2012] Extracting stamp from image fullrun_mos2_xmm0506340101_pi300-10000_cl_sm2.00.img.gz, (178, 137) - (328, 287)
[Thu Jun 21 05:46:39 2012] XMMSAS bgd. selection expression = annulus(21996.232147, 18379.621597, 4350.000000, 8700.000000, X, Y) && !ellipse(23873.241100, 22792.737400, 438.432813, 391.560011, 357.659450, X, Y) && !ellipse(16486.919480, 20952.755800, 514.158415, 393.481611, 255.768000, X, Y) && !ellipse(25622.031900, 23903.539200, 424.319212, 424.319212, 0.000000, X, Y) && !ellipse(30172.624400, 20338.884600, 414.440812, 414.440812, 0.000000, X, Y) && !ellipse(30025.723083, 15991.949768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29941.059509, 13768.078644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20643.692520, 17967.404404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28046.098724, 13989.282410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14721.864731, 17085.476685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24795.469360, 17008.272415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23904.281000, 21335.165000, 316.332009, 316.332009, 0.000000, X, Y) && !ellipse(28517.506366, 19408.505573, 421.835978, 248.672321, 332.282756, X, Y) && !ellipse(28550.904755, 17804.262146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18566.470612, 21166.786392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26406.536340, 22521.414800, 270.821608, 270.821608, 0.000000, X, Y) && !ellipse(23732.690338, 16676.480042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23547.940125, 23677.967529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30789.296234, 17320.452087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28647.369934, 13785.895218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30591.352980, 23370.073400, 499.459214, 499.459214, 0.000000, X, Y) && !ellipse(28727.084534, 10679.161140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24442.000000, 25575.285980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29575.078000, 27761.604000, 1314.368038, 1314.368038, 0.000000, X, Y)
[Thu Jun 21 05:46:39 2012] Writing fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src1.gif
[Thu Jun 21 05:47:10 2012] Mean detx,y = (-5337.89, 3796.40) 
[Thu Jun 21 05:47:11 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 05:49:03 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 05:49:03 2012] Setting source spectrum file to fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 21 05:49:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 21 06:06:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 21 06:06:45 2012] rmf not generated due to insufficient counts
[Thu Jun 21 06:32:57 2012] Updating aperture counts using extracted products
[Thu Jun 21 06:32:57 2012] Error reading totcts from fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 21 06:32:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 06:32:58 2012] Using photon index=1.80, rate=0.0301, arf fullrun_mos2_xmm0506340101_pi300-10000_pass1_cl_src1.arf
[Thu Jun 21 06:32:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 06:32:58 2012] Updating source flux to 3.7e-13
[Thu Jun 21 06:33:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting