[Wed Jun 20 18:33:33 2012] Detection parameters:
  Position = (390.0, 118.3) = 13 21 49.57 -16 54 9.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.4 +/- 19.0
  Background counts = 55.7
  Rate = 0.002 +/- 0.0002

[Wed Jun 20 18:33:34 2012] Off-axis axis estimate = 14.65'
[Wed Jun 20 20:14:49 2012] Using EEF radius (= 13.75 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 20:14:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 20 20:14:49 2012] Initial guess for spatial extent in simple fitting = 13.75"
[Wed Jun 20 20:14:49 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.044
[Wed Jun 20 20:14:49 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 13.75"
[Wed Jun 20 21:17:40 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src21.ximg exists
[Wed Jun 20 21:17:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src21.csv
[Wed Jun 20 21:17:40 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src21_1.ximg exists
[Wed Jun 20 21:17:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src21.csv
[Wed Jun 20 21:17:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 21:17:40 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Wed Jun 20 21:17:40 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Wed Jun 20 21:17:40 2012] Fit fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Wed Jun 20 22:24:04 2012] Warning, spatial fit 21 centroid is now closest to src. 7
[Wed Jun 20 22:24:04 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 22:24:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 22:24:04 2012] Assessing source extent using major
[Wed Jun 20 22:24:04 2012] Source does appear to be extended
[Wed Jun 20 22:24:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 00:02:20 2012] Using EEF radius (= 13.75 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 00:02:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 21 00:02:20 2012] Initial guess for spatial extent in simple fitting = 13.75"
[Thu Jun 21 00:02:20 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.044
[Thu Jun 21 00:02:20 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 13.75"
[Thu Jun 21 00:56:38 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src21.ximg exists
[Thu Jun 21 00:56:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src21.csv
[Thu Jun 21 00:56:38 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu Jun 21 00:56:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src21.csv
[Thu Jun 21 00:56:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 00:56:38 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu Jun 21 00:56:38 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu Jun 21 00:56:38 2012] Fit fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Thu Jun 21 01:56:00 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 14.784239 pixels away
[Thu Jun 21 01:56:00 2012] Warning, spatial fit 21 centroid is now closest to src. 7
[Thu Jun 21 01:56:00 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 01:56:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 01:56:00 2012] Assessing source extent using major
[Thu Jun 21 01:56:00 2012] Source does appear to be extended
[Thu Jun 21 01:56:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 05:08:24 2012] XMMSAS src. selection expression = ellipse(33882.392090, 10244.371552, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 05:08:24 2012] Writing source region out to fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src41_src.reg
[Thu Jun 21 05:08:24 2012] Extracting stamp from image fullrun_mos1_xmm0506340101_pi300-10000_cl_sm2.00.img.gz, (353, 81) - (428, 156)
[Thu Jun 21 05:08:24 2012] XMMSAS bgd. selection expression = annulus(33882.392090, 10244.371552, 1087.500000, 2175.000000, X, Y) && !ellipse(32672.158051, 12459.688171, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 05:08:24 2012] Writing fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src41.gif
[Thu Jun 21 05:16:56 2012] Mean detx,y = (16104.44, -2528.87) 
[Thu Jun 21 05:16:57 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 05:17:11 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 05:17:11 2012] Setting source spectrum file to fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu Jun 21 05:17:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Thu Jun 21 05:44:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 21 05:44:36 2012] rmf not generated due to insufficient counts
[Thu Jun 21 06:32:56 2012] Updating aperture counts using extracted products
[Thu Jun 21 06:32:56 2012] Error reading totcts from fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu Jun 21 06:32:57 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 06:32:57 2012] Using photon index=1.80, rate=0.0017, arf fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src41.arf
[Thu Jun 21 06:32:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 06:32:57 2012] Updating source flux to 4.8e-14
[Thu Jun 21 06:33:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting