[Wed Jun 20 18:33:33 2012] Detection parameters:
  Position = (319.3, 364.7) = 13 22 11.02 -16 36 18.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 175.9 +/- 19.8
  Background counts = 64.6
  Rate = 0.003 +/- 0.0004

[Wed Jun 20 18:33:34 2012] Off-axis axis estimate = 5.03'
[Wed Jun 20 20:14:49 2012] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 20:14:49 2012] Initial guess for spatial extent in simple fitting = 8.95"
[Wed Jun 20 20:14:49 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.956
[Wed Jun 20 20:14:49 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.95"
[Wed Jun 20 21:17:39 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src13.ximg exists
[Wed Jun 20 21:17:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src13.csv
[Wed Jun 20 21:17:39 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed Jun 20 21:17:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src13.csv
[Wed Jun 20 21:17:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 21:17:40 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed Jun 20 21:17:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed Jun 20 21:17:40 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Jun 20 21:17:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed Jun 20 21:17:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 22:24:04 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 11.600969 pixels away
[Wed Jun 20 22:24:04 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 22:24:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 22:24:04 2012] Assessing source extent using major
[Wed Jun 20 22:24:04 2012] Source does appear to be extended
[Wed Jun 20 22:24:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 00:02:20 2012] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 00:02:20 2012] Initial guess for spatial extent in simple fitting = 8.95"
[Thu Jun 21 00:02:20 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.956
[Thu Jun 21 00:02:20 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.95"
[Thu Jun 21 00:56:38 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src13.ximg exists
[Thu Jun 21 00:56:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src13.csv
[Thu Jun 21 00:56:38 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Jun 21 00:56:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src13.csv
[Thu Jun 21 00:56:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 00:56:38 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Jun 21 00:56:38 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Jun 21 00:56:38 2012] Fit fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Jun 21 01:56:00 2012] Spatial fit model total counts = 634.883000, observed total counts = 586.000000
[Thu Jun 21 01:56:00 2012] Offset between fit and detection position for source 15 = 0.213140 pixels
[Thu Jun 21 01:56:00 2012] 634.767000 total counts/ 509.821000 bgd. counts: snr = 5.533673
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.213140 pixels
  Position = (319.3, 364.4) = 13 22 11.01 -16 36 19.5
  Extent = 5.6 (4.8-6.9)", rotation angle = 0
  Source counts = 124.9 +/- 25.2
  Background counts = 509.8
  Rate = 0.001 +/- 0.0003
[Thu Jun 21 01:56:00 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 01:56:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 01:56:00 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 01:56:00 2012] Source does appear to be extended
[Thu Jun 21 01:56:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 05:08:24 2012] XMMSAS src. selection expression = ellipse(27732.394800, 31657.702200, 337.593010, 337.593010, 0.000000, X, Y)
[Thu Jun 21 05:08:24 2012] Writing source region out to fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src15_src.reg
[Thu Jun 21 05:08:24 2012] Extracting stamp from image fullrun_mos1_xmm0506340101_pi300-10000_cl_sm2.00.img.gz, (300, 345) - (339, 384)
[Thu Jun 21 05:08:24 2012] XMMSAS bgd. selection expression = annulus(27732.394800, 31657.702200, 562.655016, 1125.310032, X, Y) && !ellipse(25840.796875, 31227.025604, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 05:08:24 2012] Writing fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src15.gif
[Thu Jun 21 05:14:21 2012] Mean detx,y = (-5967.95, -5304.42) 
[Thu Jun 21 05:14:22 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 05:14:33 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 05:14:34 2012] Setting source spectrum file to fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Jun 21 05:14:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Thu Jun 21 06:32:56 2012] Updating aperture counts using extracted products
[Thu Jun 21 06:32:56 2012] Error reading totcts from fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Jun 21 06:32:57 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 06:32:57 2012] Using photon index=1.80, rate=0.00146, arf fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src15.arf
[Thu Jun 21 06:32:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 06:32:57 2012] Updating source flux to 2.8e-14