[Wed Jun 20 18:33:33 2012] Detection parameters:
  Position = (420.3, 418.8) = 13 21 40.46 -16 32 22.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.4 +/- 15.7
  Background counts = 47.1
  Rate = 0.001 +/- 0.0002

[Wed Jun 20 18:33:34 2012] Off-axis axis estimate = 12.42'
[Wed Jun 20 20:14:49 2012] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 20:14:49 2012] Initial guess for spatial extent in simple fitting = 12.64"
[Wed Jun 20 20:14:49 2012] source mask rpix=2.9, npix_max = 46, mask sum = 48, frac = 1.035
[Wed Jun 20 20:14:49 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 12.64"
[Wed Jun 20 21:17:40 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src35.ximg exists
[Wed Jun 20 21:17:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src35.csv
[Wed Jun 20 21:17:40 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src35_1.ximg exists
[Wed Jun 20 21:17:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src35.csv
[Wed Jun 20 21:17:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 21:17:40 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Wed Jun 20 21:17:40 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Wed Jun 20 21:17:40 2012] Fit fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Wed Jun 20 22:24:04 2012] Warning, spatial fit 35 centroid is now closest to src. 13
[Wed Jun 20 22:24:04 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 22:24:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 22:24:04 2012] Assessing source extent using major
[Wed Jun 20 22:24:04 2012] Source does appear to be extended
[Wed Jun 20 22:24:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 00:02:20 2012] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 00:02:20 2012] Initial guess for spatial extent in simple fitting = 12.64"
[Thu Jun 21 00:02:20 2012] source mask rpix=2.9, npix_max = 46, mask sum = 48, frac = 1.035
[Thu Jun 21 00:02:20 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 12.64"
[Thu Jun 21 00:56:38 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src33.ximg exists
[Thu Jun 21 00:56:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src33.csv
[Thu Jun 21 00:56:38 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src33_1.ximg exists
[Thu Jun 21 00:56:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src33.csv
[Thu Jun 21 00:56:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 00:56:38 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Thu Jun 21 00:56:38 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Thu Jun 21 00:56:38 2012] Fit fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Thu Jun 21 01:56:00 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 13.919376 pixels away
[Thu Jun 21 01:56:00 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 12.670770 pixels away
[Thu Jun 21 01:56:00 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 01:56:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 01:56:00 2012] Assessing source extent using major
[Thu Jun 21 01:56:00 2012] Source does appear to be extended
[Thu Jun 21 01:56:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 05:08:24 2012] XMMSAS src. selection expression = ellipse(36517.604248, 36389.634491, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 05:08:24 2012] Writing source region out to fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src12_src.reg
[Thu Jun 21 05:08:24 2012] Extracting stamp from image fullrun_mos1_xmm0506340101_pi300-10000_cl_sm2.00.img.gz, (383, 381) - (458, 456)
[Thu Jun 21 05:08:24 2012] XMMSAS bgd. selection expression = annulus(36517.604248, 36389.634491, 1087.500000, 2175.000000, X, Y) && !ellipse(34973.648956, 34507.001007, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 05:08:24 2012] Writing fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src12.gif
[Thu Jun 21 05:20:34 2012] Mean detx,y = (-6865.35, -15201.11) 
[Thu Jun 21 05:20:35 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 05:20:52 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 05:20:52 2012] Setting source spectrum file to fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jun 21 05:20:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Jun 21 05:46:05 2012] Not generating rmf since there are only 95 counts
[Thu Jun 21 05:46:05 2012] rmf not generated due to insufficient counts
[Thu Jun 21 06:32:56 2012] Updating aperture counts using extracted products
[Thu Jun 21 06:32:56 2012] Error reading totcts from fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jun 21 06:32:57 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 06:32:57 2012] Using photon index=1.80, rate=0.00106, arf fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src12.arf
[Thu Jun 21 06:32:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 06:32:57 2012] Updating source flux to 3.8e-14
[Thu Jun 21 06:33:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting